SecurityHubClient (AWS Java SDK :: Services :: SecurityHub 2.20.103 API)

All Superinterfaces:

AutoCloseable, AwsClient, SdkAutoCloseable, SdkClient
```
@Generated(value="software.amazon.awssdk:codegen")
 @ThreadSafe
public interface SecurityHubClient
extends AwsClient
```
Service client for accessing AWS SecurityHub. This can be created using the static builder() method.
Security Hub provides you with a comprehensive view of the security state of your Amazon Web Services environment and resources. It also provides you with the readiness status of your environment based on controls from supported security standards. Security Hub collects security data from Amazon Web Services accounts, services, and integrated third-party products and helps you analyze security trends in your environment to identify the highest priority security issues. For more information about Security Hub, see the Security HubUser Guide.

When you use operations in the Security Hub API, the requests are executed only in the Amazon Web Services Region that is currently active or in the specific Amazon Web Services Region that you specify in your request. Any configuration or settings change that results from the operation is applied only to that Region. To make the same change in other Regions, run the same command for each Region in which you want to apply the change.

For example, if your Region is set to us-west-2, when you use CreateMembers to add a member account to Security Hub, the association of the member account with the administrator account is created only in the us-west-2 Region. Security Hub must be enabled for the member account in the same Region that the invitation was sent from.

The following throttling limits apply to using Security Hub API operations.
- BatchEnableStandards - RateLimit of 1 request per second. BurstLimit of 1 request per second.
- GetFindings - RateLimit of 3 requests per second. BurstLimit of 6 requests per second.
- BatchImportFindings - RateLimit of 10 requests per second. BurstLimit of 30 requests per second.
- BatchUpdateFindings - RateLimit of 10 requests per second. BurstLimit of 30 requests per second.
- UpdateStandardsControl - RateLimit of 1 request per second. BurstLimit of 5 requests per second.
- All other operations - RateLimit of 10 requests per second. BurstLimit of 30 requests per second.

Field Summary

Fields
Modifier and Type Field and Description

static String SERVICE_METADATA_ID
Value for looking up the service's metadata from the ServiceMetadataProvider.

static String SERVICE_NAME

Fields
Modifier and Type	Field and Description
`static String`	`SERVICE_METADATA_ID` Value for looking up the service's metadata from the `ServiceMetadataProvider`.
`static String`	`SERVICE_NAME`

Method Summary

All Methods Static Methods Instance Methods Default Methods Deprecated Methods
Modifier and Type	Method and Description
`default AcceptAdministratorInvitationResponse`	`acceptAdministratorInvitation(AcceptAdministratorInvitationRequest acceptAdministratorInvitationRequest)` Accepts the invitation to be a member account and be monitored by the Security Hub administrator account that the invitation was sent from.
`default AcceptAdministratorInvitationResponse`	`acceptAdministratorInvitation(Consumer<AcceptAdministratorInvitationRequest.Builder> acceptAdministratorInvitationRequest)` Accepts the invitation to be a member account and be monitored by the Security Hub administrator account that the invitation was sent from.
`default AcceptInvitationResponse`	`acceptInvitation(AcceptInvitationRequest acceptInvitationRequest)` Deprecated. This API has been deprecated, use AcceptAdministratorInvitation API instead.
`default AcceptInvitationResponse`	`acceptInvitation(Consumer<AcceptInvitationRequest.Builder> acceptInvitationRequest)` Deprecated. This API has been deprecated, use AcceptAdministratorInvitation API instead.
`default BatchDeleteAutomationRulesResponse`	`batchDeleteAutomationRules(BatchDeleteAutomationRulesRequest batchDeleteAutomationRulesRequest)` Deletes one or more automation rules.
`default BatchDeleteAutomationRulesResponse`	`batchDeleteAutomationRules(Consumer<BatchDeleteAutomationRulesRequest.Builder> batchDeleteAutomationRulesRequest)` Deletes one or more automation rules.
`default BatchDisableStandardsResponse`	`batchDisableStandards(BatchDisableStandardsRequest batchDisableStandardsRequest)` Disables the standards specified by the provided `StandardsSubscriptionArns`.
`default BatchDisableStandardsResponse`	`batchDisableStandards(Consumer<BatchDisableStandardsRequest.Builder> batchDisableStandardsRequest)` Disables the standards specified by the provided `StandardsSubscriptionArns`.
`default BatchEnableStandardsResponse`	`batchEnableStandards(BatchEnableStandardsRequest batchEnableStandardsRequest)` Enables the standards specified by the provided `StandardsArn`.
`default BatchEnableStandardsResponse`	`batchEnableStandards(Consumer<BatchEnableStandardsRequest.Builder> batchEnableStandardsRequest)` Enables the standards specified by the provided `StandardsArn`.
`default BatchGetAutomationRulesResponse`	`batchGetAutomationRules(BatchGetAutomationRulesRequest batchGetAutomationRulesRequest)` Retrieves a list of details for automation rules based on rule Amazon Resource Names (ARNs).
`default BatchGetAutomationRulesResponse`	`batchGetAutomationRules(Consumer<BatchGetAutomationRulesRequest.Builder> batchGetAutomationRulesRequest)` Retrieves a list of details for automation rules based on rule Amazon Resource Names (ARNs).
`default BatchGetSecurityControlsResponse`	`batchGetSecurityControls(BatchGetSecurityControlsRequest batchGetSecurityControlsRequest)` Provides details about a batch of security controls for the current Amazon Web Services account and Amazon Web Services Region.
`default BatchGetSecurityControlsResponse`	`batchGetSecurityControls(Consumer<BatchGetSecurityControlsRequest.Builder> batchGetSecurityControlsRequest)` Provides details about a batch of security controls for the current Amazon Web Services account and Amazon Web Services Region.
`default BatchGetStandardsControlAssociationsResponse`	`batchGetStandardsControlAssociations(BatchGetStandardsControlAssociationsRequest batchGetStandardsControlAssociationsRequest)` For a batch of security controls and standards, identifies whether each control is currently enabled or disabled in a standard.
`default BatchGetStandardsControlAssociationsResponse`	`batchGetStandardsControlAssociations(Consumer<BatchGetStandardsControlAssociationsRequest.Builder> batchGetStandardsControlAssociationsRequest)` For a batch of security controls and standards, identifies whether each control is currently enabled or disabled in a standard.
`default BatchImportFindingsResponse`	`batchImportFindings(BatchImportFindingsRequest batchImportFindingsRequest)` Imports security findings generated by a finding provider into Security Hub.
`default BatchImportFindingsResponse`	`batchImportFindings(Consumer<BatchImportFindingsRequest.Builder> batchImportFindingsRequest)` Imports security findings generated by a finding provider into Security Hub.
`default BatchUpdateAutomationRulesResponse`	`batchUpdateAutomationRules(BatchUpdateAutomationRulesRequest batchUpdateAutomationRulesRequest)` Updates one or more automation rules based on rule Amazon Resource Names (ARNs) and input parameters.
`default BatchUpdateAutomationRulesResponse`	`batchUpdateAutomationRules(Consumer<BatchUpdateAutomationRulesRequest.Builder> batchUpdateAutomationRulesRequest)` Updates one or more automation rules based on rule Amazon Resource Names (ARNs) and input parameters.
`default BatchUpdateFindingsResponse`	`batchUpdateFindings(BatchUpdateFindingsRequest batchUpdateFindingsRequest)` Used by Security Hub customers to update information about their investigation into a finding.
`default BatchUpdateFindingsResponse`	`batchUpdateFindings(Consumer<BatchUpdateFindingsRequest.Builder> batchUpdateFindingsRequest)` Used by Security Hub customers to update information about their investigation into a finding.
`default BatchUpdateStandardsControlAssociationsResponse`	`batchUpdateStandardsControlAssociations(BatchUpdateStandardsControlAssociationsRequest batchUpdateStandardsControlAssociationsRequest)` For a batch of security controls and standards, this operation updates the enablement status of a control in a standard.
`default BatchUpdateStandardsControlAssociationsResponse`	`batchUpdateStandardsControlAssociations(Consumer<BatchUpdateStandardsControlAssociationsRequest.Builder> batchUpdateStandardsControlAssociationsRequest)` For a batch of security controls and standards, this operation updates the enablement status of a control in a standard.
`static SecurityHubClientBuilder`	`builder()` Create a builder that can be used to configure and create a `SecurityHubClient`.
`static SecurityHubClient`	`create()` Create a `SecurityHubClient` with the region loaded from the `DefaultAwsRegionProviderChain` and credentials loaded from the `DefaultCredentialsProvider`.
`default CreateActionTargetResponse`	`createActionTarget(Consumer<CreateActionTargetRequest.Builder> createActionTargetRequest)` Creates a custom action target in Security Hub.
`default CreateActionTargetResponse`	`createActionTarget(CreateActionTargetRequest createActionTargetRequest)` Creates a custom action target in Security Hub.
`default CreateAutomationRuleResponse`	`createAutomationRule(Consumer<CreateAutomationRuleRequest.Builder> createAutomationRuleRequest)` Creates an automation rule based on input parameters.
`default CreateAutomationRuleResponse`	`createAutomationRule(CreateAutomationRuleRequest createAutomationRuleRequest)` Creates an automation rule based on input parameters.
`default CreateFindingAggregatorResponse`	`createFindingAggregator(Consumer<CreateFindingAggregatorRequest.Builder> createFindingAggregatorRequest)` Used to enable finding aggregation.
`default CreateFindingAggregatorResponse`	`createFindingAggregator(CreateFindingAggregatorRequest createFindingAggregatorRequest)` Used to enable finding aggregation.
`default CreateInsightResponse`	`createInsight(Consumer<CreateInsightRequest.Builder> createInsightRequest)` Creates a custom insight in Security Hub.
`default CreateInsightResponse`	`createInsight(CreateInsightRequest createInsightRequest)` Creates a custom insight in Security Hub.
`default CreateMembersResponse`	`createMembers(Consumer<CreateMembersRequest.Builder> createMembersRequest)` Creates a member association in Security Hub between the specified accounts and the account used to make the request, which is the administrator account.
`default CreateMembersResponse`	`createMembers(CreateMembersRequest createMembersRequest)` Creates a member association in Security Hub between the specified accounts and the account used to make the request, which is the administrator account.
`default DeclineInvitationsResponse`	`declineInvitations(Consumer<DeclineInvitationsRequest.Builder> declineInvitationsRequest)` Declines invitations to become a member account.
`default DeclineInvitationsResponse`	`declineInvitations(DeclineInvitationsRequest declineInvitationsRequest)` Declines invitations to become a member account.
`default DeleteActionTargetResponse`	`deleteActionTarget(Consumer<DeleteActionTargetRequest.Builder> deleteActionTargetRequest)` Deletes a custom action target from Security Hub.
`default DeleteActionTargetResponse`	`deleteActionTarget(DeleteActionTargetRequest deleteActionTargetRequest)` Deletes a custom action target from Security Hub.
`default DeleteFindingAggregatorResponse`	`deleteFindingAggregator(Consumer<DeleteFindingAggregatorRequest.Builder> deleteFindingAggregatorRequest)` Deletes a finding aggregator.
`default DeleteFindingAggregatorResponse`	`deleteFindingAggregator(DeleteFindingAggregatorRequest deleteFindingAggregatorRequest)` Deletes a finding aggregator.
`default DeleteInsightResponse`	`deleteInsight(Consumer<DeleteInsightRequest.Builder> deleteInsightRequest)` Deletes the insight specified by the `InsightArn`.
`default DeleteInsightResponse`	`deleteInsight(DeleteInsightRequest deleteInsightRequest)` Deletes the insight specified by the `InsightArn`.
`default DeleteInvitationsResponse`	`deleteInvitations(Consumer<DeleteInvitationsRequest.Builder> deleteInvitationsRequest)` Deletes invitations received by the Amazon Web Services account to become a member account.
`default DeleteInvitationsResponse`	`deleteInvitations(DeleteInvitationsRequest deleteInvitationsRequest)` Deletes invitations received by the Amazon Web Services account to become a member account.
`default DeleteMembersResponse`	`deleteMembers(Consumer<DeleteMembersRequest.Builder> deleteMembersRequest)` Deletes the specified member accounts from Security Hub.
`default DeleteMembersResponse`	`deleteMembers(DeleteMembersRequest deleteMembersRequest)` Deletes the specified member accounts from Security Hub.
`default DescribeActionTargetsResponse`	`describeActionTargets(Consumer<DescribeActionTargetsRequest.Builder> describeActionTargetsRequest)` Returns a list of the custom action targets in Security Hub in your account.
`default DescribeActionTargetsResponse`	`describeActionTargets(DescribeActionTargetsRequest describeActionTargetsRequest)` Returns a list of the custom action targets in Security Hub in your account.
`default DescribeActionTargetsIterable`	`describeActionTargetsPaginator(Consumer<DescribeActionTargetsRequest.Builder> describeActionTargetsRequest)` Returns a list of the custom action targets in Security Hub in your account.
`default DescribeActionTargetsIterable`	`describeActionTargetsPaginator(DescribeActionTargetsRequest describeActionTargetsRequest)` Returns a list of the custom action targets in Security Hub in your account.
`default DescribeHubResponse`	`describeHub(Consumer<DescribeHubRequest.Builder> describeHubRequest)` Returns details about the Hub resource in your account, including the `HubArn` and the time when you enabled Security Hub.
`default DescribeHubResponse`	`describeHub(DescribeHubRequest describeHubRequest)` Returns details about the Hub resource in your account, including the `HubArn` and the time when you enabled Security Hub.
`default DescribeOrganizationConfigurationResponse`	`describeOrganizationConfiguration(Consumer<DescribeOrganizationConfigurationRequest.Builder> describeOrganizationConfigurationRequest)` Returns information about the Organizations configuration for Security Hub.
`default DescribeOrganizationConfigurationResponse`	`describeOrganizationConfiguration(DescribeOrganizationConfigurationRequest describeOrganizationConfigurationRequest)` Returns information about the Organizations configuration for Security Hub.
`default DescribeProductsResponse`	`describeProducts(Consumer<DescribeProductsRequest.Builder> describeProductsRequest)` Returns information about product integrations in Security Hub.
`default DescribeProductsResponse`	`describeProducts(DescribeProductsRequest describeProductsRequest)` Returns information about product integrations in Security Hub.
`default DescribeProductsIterable`	`describeProductsPaginator(Consumer<DescribeProductsRequest.Builder> describeProductsRequest)` Returns information about product integrations in Security Hub.
`default DescribeProductsIterable`	`describeProductsPaginator(DescribeProductsRequest describeProductsRequest)` Returns information about product integrations in Security Hub.
`default DescribeStandardsResponse`	`describeStandards(Consumer<DescribeStandardsRequest.Builder> describeStandardsRequest)` Returns a list of the available standards in Security Hub.
`default DescribeStandardsResponse`	`describeStandards(DescribeStandardsRequest describeStandardsRequest)` Returns a list of the available standards in Security Hub.
`default DescribeStandardsControlsResponse`	`describeStandardsControls(Consumer<DescribeStandardsControlsRequest.Builder> describeStandardsControlsRequest)` Returns a list of security standards controls.
`default DescribeStandardsControlsResponse`	`describeStandardsControls(DescribeStandardsControlsRequest describeStandardsControlsRequest)` Returns a list of security standards controls.
`default DescribeStandardsControlsIterable`	`describeStandardsControlsPaginator(Consumer<DescribeStandardsControlsRequest.Builder> describeStandardsControlsRequest)` Returns a list of security standards controls.
`default DescribeStandardsControlsIterable`	`describeStandardsControlsPaginator(DescribeStandardsControlsRequest describeStandardsControlsRequest)` Returns a list of security standards controls.
`default DescribeStandardsIterable`	`describeStandardsPaginator(Consumer<DescribeStandardsRequest.Builder> describeStandardsRequest)` Returns a list of the available standards in Security Hub.
`default DescribeStandardsIterable`	`describeStandardsPaginator(DescribeStandardsRequest describeStandardsRequest)` Returns a list of the available standards in Security Hub.
`default DisableImportFindingsForProductResponse`	`disableImportFindingsForProduct(Consumer<DisableImportFindingsForProductRequest.Builder> disableImportFindingsForProductRequest)` Disables the integration of the specified product with Security Hub.
`default DisableImportFindingsForProductResponse`	`disableImportFindingsForProduct(DisableImportFindingsForProductRequest disableImportFindingsForProductRequest)` Disables the integration of the specified product with Security Hub.
`default DisableOrganizationAdminAccountResponse`	`disableOrganizationAdminAccount(Consumer<DisableOrganizationAdminAccountRequest.Builder> disableOrganizationAdminAccountRequest)` Disables a Security Hub administrator account.
`default DisableOrganizationAdminAccountResponse`	`disableOrganizationAdminAccount(DisableOrganizationAdminAccountRequest disableOrganizationAdminAccountRequest)` Disables a Security Hub administrator account.
`default DisableSecurityHubResponse`	`disableSecurityHub()` Disables Security Hub in your account only in the current Region.
`default DisableSecurityHubResponse`	`disableSecurityHub(Consumer<DisableSecurityHubRequest.Builder> disableSecurityHubRequest)` Disables Security Hub in your account only in the current Region.
`default DisableSecurityHubResponse`	`disableSecurityHub(DisableSecurityHubRequest disableSecurityHubRequest)` Disables Security Hub in your account only in the current Region.
`default DisassociateFromAdministratorAccountResponse`	`disassociateFromAdministratorAccount(Consumer<DisassociateFromAdministratorAccountRequest.Builder> disassociateFromAdministratorAccountRequest)` Disassociates the current Security Hub member account from the associated administrator account.
`default DisassociateFromAdministratorAccountResponse`	`disassociateFromAdministratorAccount(DisassociateFromAdministratorAccountRequest disassociateFromAdministratorAccountRequest)` Disassociates the current Security Hub member account from the associated administrator account.
`default DisassociateFromMasterAccountResponse`	`disassociateFromMasterAccount(Consumer<DisassociateFromMasterAccountRequest.Builder> disassociateFromMasterAccountRequest)` Deprecated. This API has been deprecated, use DisassociateFromAdministratorAccount API instead.
`default DisassociateFromMasterAccountResponse`	`disassociateFromMasterAccount(DisassociateFromMasterAccountRequest disassociateFromMasterAccountRequest)` Deprecated. This API has been deprecated, use DisassociateFromAdministratorAccount API instead.
`default DisassociateMembersResponse`	`disassociateMembers(Consumer<DisassociateMembersRequest.Builder> disassociateMembersRequest)` Disassociates the specified member accounts from the associated administrator account.
`default DisassociateMembersResponse`	`disassociateMembers(DisassociateMembersRequest disassociateMembersRequest)` Disassociates the specified member accounts from the associated administrator account.
`default EnableImportFindingsForProductResponse`	`enableImportFindingsForProduct(Consumer<EnableImportFindingsForProductRequest.Builder> enableImportFindingsForProductRequest)` Enables the integration of a partner product with Security Hub.
`default EnableImportFindingsForProductResponse`	`enableImportFindingsForProduct(EnableImportFindingsForProductRequest enableImportFindingsForProductRequest)` Enables the integration of a partner product with Security Hub.
`default EnableOrganizationAdminAccountResponse`	`enableOrganizationAdminAccount(Consumer<EnableOrganizationAdminAccountRequest.Builder> enableOrganizationAdminAccountRequest)` Designates the Security Hub administrator account for an organization.
`default EnableOrganizationAdminAccountResponse`	`enableOrganizationAdminAccount(EnableOrganizationAdminAccountRequest enableOrganizationAdminAccountRequest)` Designates the Security Hub administrator account for an organization.
`default EnableSecurityHubResponse`	`enableSecurityHub()` Enables Security Hub for your account in the current Region or the Region you specify in the request.
`default EnableSecurityHubResponse`	`enableSecurityHub(Consumer<EnableSecurityHubRequest.Builder> enableSecurityHubRequest)` Enables Security Hub for your account in the current Region or the Region you specify in the request.
`default EnableSecurityHubResponse`	`enableSecurityHub(EnableSecurityHubRequest enableSecurityHubRequest)` Enables Security Hub for your account in the current Region or the Region you specify in the request.
`default GetAdministratorAccountResponse`	`getAdministratorAccount(Consumer<GetAdministratorAccountRequest.Builder> getAdministratorAccountRequest)` Provides the details for the Security Hub administrator account for the current member account.
`default GetAdministratorAccountResponse`	`getAdministratorAccount(GetAdministratorAccountRequest getAdministratorAccountRequest)` Provides the details for the Security Hub administrator account for the current member account.
`default GetEnabledStandardsResponse`	`getEnabledStandards(Consumer<GetEnabledStandardsRequest.Builder> getEnabledStandardsRequest)` Returns a list of the standards that are currently enabled.
`default GetEnabledStandardsResponse`	`getEnabledStandards(GetEnabledStandardsRequest getEnabledStandardsRequest)` Returns a list of the standards that are currently enabled.
`default GetEnabledStandardsIterable`	`getEnabledStandardsPaginator(Consumer<GetEnabledStandardsRequest.Builder> getEnabledStandardsRequest)` Returns a list of the standards that are currently enabled.
`default GetEnabledStandardsIterable`	`getEnabledStandardsPaginator(GetEnabledStandardsRequest getEnabledStandardsRequest)` Returns a list of the standards that are currently enabled.
`default GetFindingAggregatorResponse`	`getFindingAggregator(Consumer<GetFindingAggregatorRequest.Builder> getFindingAggregatorRequest)` Returns the current finding aggregation configuration.
`default GetFindingAggregatorResponse`	`getFindingAggregator(GetFindingAggregatorRequest getFindingAggregatorRequest)` Returns the current finding aggregation configuration.
`default GetFindingHistoryResponse`	`getFindingHistory(Consumer<GetFindingHistoryRequest.Builder> getFindingHistoryRequest)` Returns history for a Security Hub finding in the last 90 days.
`default GetFindingHistoryResponse`	`getFindingHistory(GetFindingHistoryRequest getFindingHistoryRequest)` Returns history for a Security Hub finding in the last 90 days.
`default GetFindingHistoryIterable`	`getFindingHistoryPaginator(Consumer<GetFindingHistoryRequest.Builder> getFindingHistoryRequest)` Returns history for a Security Hub finding in the last 90 days.
`default GetFindingHistoryIterable`	`getFindingHistoryPaginator(GetFindingHistoryRequest getFindingHistoryRequest)` Returns history for a Security Hub finding in the last 90 days.
`default GetFindingsResponse`	`getFindings()` Returns a list of findings that match the specified criteria.
`default GetFindingsResponse`	`getFindings(Consumer<GetFindingsRequest.Builder> getFindingsRequest)` Returns a list of findings that match the specified criteria.
`default GetFindingsResponse`	`getFindings(GetFindingsRequest getFindingsRequest)` Returns a list of findings that match the specified criteria.
`default GetFindingsIterable`	`getFindingsPaginator()` Returns a list of findings that match the specified criteria.
`default GetFindingsIterable`	`getFindingsPaginator(Consumer<GetFindingsRequest.Builder> getFindingsRequest)` Returns a list of findings that match the specified criteria.
`default GetFindingsIterable`	`getFindingsPaginator(GetFindingsRequest getFindingsRequest)` Returns a list of findings that match the specified criteria.
`default GetInsightResultsResponse`	`getInsightResults(Consumer<GetInsightResultsRequest.Builder> getInsightResultsRequest)` Lists the results of the Security Hub insight specified by the insight ARN.
`default GetInsightResultsResponse`	`getInsightResults(GetInsightResultsRequest getInsightResultsRequest)` Lists the results of the Security Hub insight specified by the insight ARN.
`default GetInsightsResponse`	`getInsights(Consumer<GetInsightsRequest.Builder> getInsightsRequest)` Lists and describes insights for the specified insight ARNs.
`default GetInsightsResponse`	`getInsights(GetInsightsRequest getInsightsRequest)` Lists and describes insights for the specified insight ARNs.
`default GetInsightsIterable`	`getInsightsPaginator(Consumer<GetInsightsRequest.Builder> getInsightsRequest)` Lists and describes insights for the specified insight ARNs.
`default GetInsightsIterable`	`getInsightsPaginator(GetInsightsRequest getInsightsRequest)` Lists and describes insights for the specified insight ARNs.
`default GetInvitationsCountResponse`	`getInvitationsCount()` Returns the count of all Security Hub membership invitations that were sent to the current member account, not including the currently accepted invitation.
`default GetInvitationsCountResponse`	`getInvitationsCount(Consumer<GetInvitationsCountRequest.Builder> getInvitationsCountRequest)` Returns the count of all Security Hub membership invitations that were sent to the current member account, not including the currently accepted invitation.
`default GetInvitationsCountResponse`	`getInvitationsCount(GetInvitationsCountRequest getInvitationsCountRequest)` Returns the count of all Security Hub membership invitations that were sent to the current member account, not including the currently accepted invitation.
`default GetMasterAccountResponse`	`getMasterAccount()` Deprecated. This API has been deprecated, use GetAdministratorAccount API instead.
`default GetMasterAccountResponse`	`getMasterAccount(Consumer<GetMasterAccountRequest.Builder> getMasterAccountRequest)` Deprecated. This API has been deprecated, use GetAdministratorAccount API instead.
`default GetMasterAccountResponse`	`getMasterAccount(GetMasterAccountRequest getMasterAccountRequest)` Deprecated. This API has been deprecated, use GetAdministratorAccount API instead.
`default GetMembersResponse`	`getMembers(Consumer<GetMembersRequest.Builder> getMembersRequest)` Returns the details for the Security Hub member accounts for the specified account IDs.
`default GetMembersResponse`	`getMembers(GetMembersRequest getMembersRequest)` Returns the details for the Security Hub member accounts for the specified account IDs.
`default InviteMembersResponse`	`inviteMembers(Consumer<InviteMembersRequest.Builder> inviteMembersRequest)` Invites other Amazon Web Services accounts to become member accounts for the Security Hub administrator account that the invitation is sent from.
`default InviteMembersResponse`	`inviteMembers(InviteMembersRequest inviteMembersRequest)` Invites other Amazon Web Services accounts to become member accounts for the Security Hub administrator account that the invitation is sent from.
`default ListAutomationRulesResponse`	`listAutomationRules(Consumer<ListAutomationRulesRequest.Builder> listAutomationRulesRequest)` A list of automation rules and their metadata for the calling account.
`default ListAutomationRulesResponse`	`listAutomationRules(ListAutomationRulesRequest listAutomationRulesRequest)` A list of automation rules and their metadata for the calling account.
`default ListEnabledProductsForImportResponse`	`listEnabledProductsForImport()` Lists all findings-generating solutions (products) that you are subscribed to receive findings from in Security Hub.
`default ListEnabledProductsForImportResponse`	`listEnabledProductsForImport(Consumer<ListEnabledProductsForImportRequest.Builder> listEnabledProductsForImportRequest)` Lists all findings-generating solutions (products) that you are subscribed to receive findings from in Security Hub.
`default ListEnabledProductsForImportResponse`	`listEnabledProductsForImport(ListEnabledProductsForImportRequest listEnabledProductsForImportRequest)` Lists all findings-generating solutions (products) that you are subscribed to receive findings from in Security Hub.
`default ListEnabledProductsForImportIterable`	`listEnabledProductsForImportPaginator()` Lists all findings-generating solutions (products) that you are subscribed to receive findings from in Security Hub.
`default ListEnabledProductsForImportIterable`	`listEnabledProductsForImportPaginator(Consumer<ListEnabledProductsForImportRequest.Builder> listEnabledProductsForImportRequest)` Lists all findings-generating solutions (products) that you are subscribed to receive findings from in Security Hub.
`default ListEnabledProductsForImportIterable`	`listEnabledProductsForImportPaginator(ListEnabledProductsForImportRequest listEnabledProductsForImportRequest)` Lists all findings-generating solutions (products) that you are subscribed to receive findings from in Security Hub.
`default ListFindingAggregatorsResponse`	`listFindingAggregators(Consumer<ListFindingAggregatorsRequest.Builder> listFindingAggregatorsRequest)` If finding aggregation is enabled, then `ListFindingAggregators` returns the ARN of the finding aggregator.
`default ListFindingAggregatorsResponse`	`listFindingAggregators(ListFindingAggregatorsRequest listFindingAggregatorsRequest)` If finding aggregation is enabled, then `ListFindingAggregators` returns the ARN of the finding aggregator.
`default ListFindingAggregatorsIterable`	`listFindingAggregatorsPaginator(Consumer<ListFindingAggregatorsRequest.Builder> listFindingAggregatorsRequest)` If finding aggregation is enabled, then `ListFindingAggregators` returns the ARN of the finding aggregator.
`default ListFindingAggregatorsIterable`	`listFindingAggregatorsPaginator(ListFindingAggregatorsRequest listFindingAggregatorsRequest)` If finding aggregation is enabled, then `ListFindingAggregators` returns the ARN of the finding aggregator.
`default ListInvitationsResponse`	`listInvitations()` Lists all Security Hub membership invitations that were sent to the current Amazon Web Services account.
`default ListInvitationsResponse`	`listInvitations(Consumer<ListInvitationsRequest.Builder> listInvitationsRequest)` Lists all Security Hub membership invitations that were sent to the current Amazon Web Services account.
`default ListInvitationsResponse`	`listInvitations(ListInvitationsRequest listInvitationsRequest)` Lists all Security Hub membership invitations that were sent to the current Amazon Web Services account.
`default ListInvitationsIterable`	`listInvitationsPaginator()` Lists all Security Hub membership invitations that were sent to the current Amazon Web Services account.
`default ListInvitationsIterable`	`listInvitationsPaginator(Consumer<ListInvitationsRequest.Builder> listInvitationsRequest)` Lists all Security Hub membership invitations that were sent to the current Amazon Web Services account.
`default ListInvitationsIterable`	`listInvitationsPaginator(ListInvitationsRequest listInvitationsRequest)` Lists all Security Hub membership invitations that were sent to the current Amazon Web Services account.
`default ListMembersResponse`	`listMembers()` Lists details about all member accounts for the current Security Hub administrator account.
`default ListMembersResponse`	`listMembers(Consumer<ListMembersRequest.Builder> listMembersRequest)` Lists details about all member accounts for the current Security Hub administrator account.
`default ListMembersResponse`	`listMembers(ListMembersRequest listMembersRequest)` Lists details about all member accounts for the current Security Hub administrator account.
`default ListMembersIterable`	`listMembersPaginator()` Lists details about all member accounts for the current Security Hub administrator account.
`default ListMembersIterable`	`listMembersPaginator(Consumer<ListMembersRequest.Builder> listMembersRequest)` Lists details about all member accounts for the current Security Hub administrator account.
`default ListMembersIterable`	`listMembersPaginator(ListMembersRequest listMembersRequest)` Lists details about all member accounts for the current Security Hub administrator account.
`default ListOrganizationAdminAccountsResponse`	`listOrganizationAdminAccounts(Consumer<ListOrganizationAdminAccountsRequest.Builder> listOrganizationAdminAccountsRequest)` Lists the Security Hub administrator accounts.
`default ListOrganizationAdminAccountsResponse`	`listOrganizationAdminAccounts(ListOrganizationAdminAccountsRequest listOrganizationAdminAccountsRequest)` Lists the Security Hub administrator accounts.
`default ListOrganizationAdminAccountsIterable`	`listOrganizationAdminAccountsPaginator(Consumer<ListOrganizationAdminAccountsRequest.Builder> listOrganizationAdminAccountsRequest)` Lists the Security Hub administrator accounts.
`default ListOrganizationAdminAccountsIterable`	`listOrganizationAdminAccountsPaginator(ListOrganizationAdminAccountsRequest listOrganizationAdminAccountsRequest)` Lists the Security Hub administrator accounts.
`default ListSecurityControlDefinitionsResponse`	`listSecurityControlDefinitions(Consumer<ListSecurityControlDefinitionsRequest.Builder> listSecurityControlDefinitionsRequest)` Lists all of the security controls that apply to a specified standard.
`default ListSecurityControlDefinitionsResponse`	`listSecurityControlDefinitions(ListSecurityControlDefinitionsRequest listSecurityControlDefinitionsRequest)` Lists all of the security controls that apply to a specified standard.
`default ListSecurityControlDefinitionsIterable`	`listSecurityControlDefinitionsPaginator(Consumer<ListSecurityControlDefinitionsRequest.Builder> listSecurityControlDefinitionsRequest)` Lists all of the security controls that apply to a specified standard.
`default ListSecurityControlDefinitionsIterable`	`listSecurityControlDefinitionsPaginator(ListSecurityControlDefinitionsRequest listSecurityControlDefinitionsRequest)` Lists all of the security controls that apply to a specified standard.
`default ListStandardsControlAssociationsResponse`	`listStandardsControlAssociations(Consumer<ListStandardsControlAssociationsRequest.Builder> listStandardsControlAssociationsRequest)` Specifies whether a control is currently enabled or disabled in each enabled standard in the calling account.
`default ListStandardsControlAssociationsResponse`	`listStandardsControlAssociations(ListStandardsControlAssociationsRequest listStandardsControlAssociationsRequest)` Specifies whether a control is currently enabled or disabled in each enabled standard in the calling account.
`default ListStandardsControlAssociationsIterable`	`listStandardsControlAssociationsPaginator(Consumer<ListStandardsControlAssociationsRequest.Builder> listStandardsControlAssociationsRequest)` Specifies whether a control is currently enabled or disabled in each enabled standard in the calling account.
`default ListStandardsControlAssociationsIterable`	`listStandardsControlAssociationsPaginator(ListStandardsControlAssociationsRequest listStandardsControlAssociationsRequest)` Specifies whether a control is currently enabled or disabled in each enabled standard in the calling account.
`default ListTagsForResourceResponse`	`listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)` Returns a list of tags associated with a resource.
`default ListTagsForResourceResponse`	`listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)` Returns a list of tags associated with a resource.
`default SecurityHubServiceClientConfiguration`	`serviceClientConfiguration()`
`static ServiceMetadata`	`serviceMetadata()`
`default TagResourceResponse`	`tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)` Adds one or more tags to a resource.
`default TagResourceResponse`	`tagResource(TagResourceRequest tagResourceRequest)` Adds one or more tags to a resource.
`default UntagResourceResponse`	`untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)` Removes one or more tags from a resource.
`default UntagResourceResponse`	`untagResource(UntagResourceRequest untagResourceRequest)` Removes one or more tags from a resource.
`default UpdateActionTargetResponse`	`updateActionTarget(Consumer<UpdateActionTargetRequest.Builder> updateActionTargetRequest)` Updates the name and description of a custom action target in Security Hub.
`default UpdateActionTargetResponse`	`updateActionTarget(UpdateActionTargetRequest updateActionTargetRequest)` Updates the name and description of a custom action target in Security Hub.
`default UpdateFindingAggregatorResponse`	`updateFindingAggregator(Consumer<UpdateFindingAggregatorRequest.Builder> updateFindingAggregatorRequest)` Updates the finding aggregation configuration.
`default UpdateFindingAggregatorResponse`	`updateFindingAggregator(UpdateFindingAggregatorRequest updateFindingAggregatorRequest)` Updates the finding aggregation configuration.
`default UpdateFindingsResponse`	`updateFindings(Consumer<UpdateFindingsRequest.Builder> updateFindingsRequest)` `UpdateFindings` is deprecated.
`default UpdateFindingsResponse`	`updateFindings(UpdateFindingsRequest updateFindingsRequest)` `UpdateFindings` is deprecated.
`default UpdateInsightResponse`	`updateInsight(Consumer<UpdateInsightRequest.Builder> updateInsightRequest)` Updates the Security Hub insight identified by the specified insight ARN.
`default UpdateInsightResponse`	`updateInsight(UpdateInsightRequest updateInsightRequest)` Updates the Security Hub insight identified by the specified insight ARN.
`default UpdateOrganizationConfigurationResponse`	`updateOrganizationConfiguration(Consumer<UpdateOrganizationConfigurationRequest.Builder> updateOrganizationConfigurationRequest)` Used to update the configuration related to Organizations.
`default UpdateOrganizationConfigurationResponse`	`updateOrganizationConfiguration(UpdateOrganizationConfigurationRequest updateOrganizationConfigurationRequest)` Used to update the configuration related to Organizations.
`default UpdateSecurityHubConfigurationResponse`	`updateSecurityHubConfiguration(Consumer<UpdateSecurityHubConfigurationRequest.Builder> updateSecurityHubConfigurationRequest)` Updates configuration options for Security Hub.
`default UpdateSecurityHubConfigurationResponse`	`updateSecurityHubConfiguration(UpdateSecurityHubConfigurationRequest updateSecurityHubConfigurationRequest)` Updates configuration options for Security Hub.
`default UpdateStandardsControlResponse`	`updateStandardsControl(Consumer<UpdateStandardsControlRequest.Builder> updateStandardsControlRequest)` Used to control whether an individual security standard control is enabled or disabled.
`default UpdateStandardsControlResponse`	`updateStandardsControl(UpdateStandardsControlRequest updateStandardsControlRequest)` Used to control whether an individual security standard control is enabled or disabled.

Methods inherited from interface software.amazon.awssdk.core.SdkClient
serviceName

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable
close

- Field Detail
  - SERVICE_NAME
```
static final String SERVICE_NAME
```
    See Also:
    
    Constant Field Values
  - SERVICE_METADATA_ID
```
static final String SERVICE_METADATA_ID
```
    Value for looking up the service's metadata from the ServiceMetadataProvider.
    
    See Also:
    
    Constant Field Values
- Method Detail
  - acceptAdministratorInvitation
```
default AcceptAdministratorInvitationResponse acceptAdministratorInvitation(AcceptAdministratorInvitationRequest acceptAdministratorInvitationRequest)
                                                                     throws InternalException,
                                                                            InvalidInputException,
                                                                            LimitExceededException,
                                                                            ResourceNotFoundException,
                                                                            InvalidAccessException,
                                                                            AwsServiceException,
                                                                            SdkClientException,
                                                                            SecurityHubException
```
    Accepts the invitation to be a member account and be monitored by the Security Hub administrator account that the invitation was sent from.
    
    This operation is only used by member accounts that are not added through Organizations.
    
    When the member account accepts the invitation, permission is granted to the administrator account to view findings generated in the member account.
    
    Parameters:
    
    acceptAdministratorInvitationRequest -
    
    Returns:
    
    Result of the AcceptAdministratorInvitation operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - acceptAdministratorInvitation
```
default AcceptAdministratorInvitationResponse acceptAdministratorInvitation(Consumer<AcceptAdministratorInvitationRequest.Builder> acceptAdministratorInvitationRequest)
                                                                     throws InternalException,
                                                                            InvalidInputException,
                                                                            LimitExceededException,
                                                                            ResourceNotFoundException,
                                                                            InvalidAccessException,
                                                                            AwsServiceException,
                                                                            SdkClientException,
                                                                            SecurityHubException
```
    Accepts the invitation to be a member account and be monitored by the Security Hub administrator account that the invitation was sent from.
    
    This operation is only used by member accounts that are not added through Organizations.
    
    When the member account accepts the invitation, permission is granted to the administrator account to view findings generated in the member account.
    
    This is a convenience which creates an instance of the AcceptAdministratorInvitationRequest.Builder avoiding the need to create one manually via AcceptAdministratorInvitationRequest.builder()
    
    Parameters:
    
    acceptAdministratorInvitationRequest - A Consumer that will call methods on AcceptAdministratorInvitationRequest.Builder to create a request.
    
    Returns:
    
    Result of the AcceptAdministratorInvitation operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - acceptInvitation
```
@Deprecated
default AcceptInvitationResponse acceptInvitation(AcceptInvitationRequest acceptInvitationRequest)
                                                       throws InternalException,
                                                              InvalidInputException,
                                                              LimitExceededException,
                                                              ResourceNotFoundException,
                                                              InvalidAccessException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              SecurityHubException
```
    Deprecated. This API has been deprecated, use AcceptAdministratorInvitation API instead.
    
    This method is deprecated. Instead, use AcceptAdministratorInvitation.
    
    The Security Hub console continues to use AcceptInvitation. It will eventually change to use AcceptAdministratorInvitation. Any IAM policies that specifically control access to this function must continue to use AcceptInvitation. You should also add AcceptAdministratorInvitation to your policies to ensure that the correct permissions are in place after the console begins to use AcceptAdministratorInvitation.
    
    Accepts the invitation to be a member account and be monitored by the Security Hub administrator account that the invitation was sent from.
    
    This operation is only used by member accounts that are not added through Organizations.
    
    When the member account accepts the invitation, permission is granted to the administrator account to view findings generated in the member account.
    
    Parameters:
    
    acceptInvitationRequest -
    
    Returns:
    
    Result of the AcceptInvitation operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - acceptInvitation
```
@Deprecated
default AcceptInvitationResponse acceptInvitation(Consumer<AcceptInvitationRequest.Builder> acceptInvitationRequest)
                                                       throws InternalException,
                                                              InvalidInputException,
                                                              LimitExceededException,
                                                              ResourceNotFoundException,
                                                              InvalidAccessException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              SecurityHubException
```
    Deprecated. This API has been deprecated, use AcceptAdministratorInvitation API instead.
    
    This method is deprecated. Instead, use AcceptAdministratorInvitation.
    
    The Security Hub console continues to use AcceptInvitation. It will eventually change to use AcceptAdministratorInvitation. Any IAM policies that specifically control access to this function must continue to use AcceptInvitation. You should also add AcceptAdministratorInvitation to your policies to ensure that the correct permissions are in place after the console begins to use AcceptAdministratorInvitation.
    
    Accepts the invitation to be a member account and be monitored by the Security Hub administrator account that the invitation was sent from.
    
    This operation is only used by member accounts that are not added through Organizations.
    
    When the member account accepts the invitation, permission is granted to the administrator account to view findings generated in the member account.
    
    This is a convenience which creates an instance of the AcceptInvitationRequest.Builder avoiding the need to create one manually via AcceptInvitationRequest.builder()
    
    Parameters:
    
    acceptInvitationRequest - A Consumer that will call methods on AcceptInvitationRequest.Builder to create a request.
    
    Returns:
    
    Result of the AcceptInvitation operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchDeleteAutomationRules
```
default BatchDeleteAutomationRulesResponse batchDeleteAutomationRules(BatchDeleteAutomationRulesRequest batchDeleteAutomationRulesRequest)
                                                               throws InternalException,
                                                                      InvalidAccessException,
                                                                      InvalidInputException,
                                                                      LimitExceededException,
                                                                      ResourceNotFoundException,
                                                                      AwsServiceException,
                                                                      SdkClientException,
                                                                      SecurityHubException
```
    Deletes one or more automation rules.
    
    Parameters:
    
    batchDeleteAutomationRulesRequest -
    
    Returns:
    
    Result of the BatchDeleteAutomationRules operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchDeleteAutomationRules
```
default BatchDeleteAutomationRulesResponse batchDeleteAutomationRules(Consumer<BatchDeleteAutomationRulesRequest.Builder> batchDeleteAutomationRulesRequest)
                                                               throws InternalException,
                                                                      InvalidAccessException,
                                                                      InvalidInputException,
                                                                      LimitExceededException,
                                                                      ResourceNotFoundException,
                                                                      AwsServiceException,
                                                                      SdkClientException,
                                                                      SecurityHubException
```
    Deletes one or more automation rules.
    
    This is a convenience which creates an instance of the BatchDeleteAutomationRulesRequest.Builder avoiding the need to create one manually via BatchDeleteAutomationRulesRequest.builder()
    
    Parameters:
    
    batchDeleteAutomationRulesRequest - A Consumer that will call methods on BatchDeleteAutomationRulesRequest.Builder to create a request.
    
    Returns:
    
    Result of the BatchDeleteAutomationRules operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchDisableStandards
```
default BatchDisableStandardsResponse batchDisableStandards(BatchDisableStandardsRequest batchDisableStandardsRequest)
                                                     throws InternalException,
                                                            InvalidInputException,
                                                            InvalidAccessException,
                                                            LimitExceededException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            SecurityHubException
```
    Disables the standards specified by the provided StandardsSubscriptionArns.
    
    For more information, see Security Standards section of the Security Hub User Guide.
    
    Parameters:
    
    batchDisableStandardsRequest -
    
    Returns:
    
    Result of the BatchDisableStandards operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchDisableStandards
```
default BatchDisableStandardsResponse batchDisableStandards(Consumer<BatchDisableStandardsRequest.Builder> batchDisableStandardsRequest)
                                                     throws InternalException,
                                                            InvalidInputException,
                                                            InvalidAccessException,
                                                            LimitExceededException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            SecurityHubException
```
    Disables the standards specified by the provided StandardsSubscriptionArns.
    
    For more information, see Security Standards section of the Security Hub User Guide.
    
    This is a convenience which creates an instance of the BatchDisableStandardsRequest.Builder avoiding the need to create one manually via BatchDisableStandardsRequest.builder()
    
    Parameters:
    
    batchDisableStandardsRequest - A Consumer that will call methods on BatchDisableStandardsRequest.Builder to create a request.
    
    Returns:
    
    Result of the BatchDisableStandards operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchEnableStandards
```
default BatchEnableStandardsResponse batchEnableStandards(BatchEnableStandardsRequest batchEnableStandardsRequest)
                                                   throws InternalException,
                                                          InvalidInputException,
                                                          InvalidAccessException,
                                                          LimitExceededException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          SecurityHubException
```
    Enables the standards specified by the provided StandardsArn. To obtain the ARN for a standard, use the DescribeStandards operation.
    
    For more information, see the Security Standards section of the Security Hub User Guide.
    
    Parameters:
    
    batchEnableStandardsRequest -
    
    Returns:
    
    Result of the BatchEnableStandards operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchEnableStandards
```
default BatchEnableStandardsResponse batchEnableStandards(Consumer<BatchEnableStandardsRequest.Builder> batchEnableStandardsRequest)
                                                   throws InternalException,
                                                          InvalidInputException,
                                                          InvalidAccessException,
                                                          LimitExceededException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          SecurityHubException
```
    Enables the standards specified by the provided StandardsArn. To obtain the ARN for a standard, use the DescribeStandards operation.
    
    For more information, see the Security Standards section of the Security Hub User Guide.
    
    This is a convenience which creates an instance of the BatchEnableStandardsRequest.Builder avoiding the need to create one manually via BatchEnableStandardsRequest.builder()
    
    Parameters:
    
    batchEnableStandardsRequest - A Consumer that will call methods on BatchEnableStandardsRequest.Builder to create a request.
    
    Returns:
    
    Result of the BatchEnableStandards operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchGetAutomationRules
```
default BatchGetAutomationRulesResponse batchGetAutomationRules(BatchGetAutomationRulesRequest batchGetAutomationRulesRequest)
                                                         throws AccessDeniedException,
                                                                InternalException,
                                                                InvalidAccessException,
                                                                InvalidInputException,
                                                                LimitExceededException,
                                                                ResourceNotFoundException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                SecurityHubException
```
    Retrieves a list of details for automation rules based on rule Amazon Resource Names (ARNs).
    
    Parameters:
    
    batchGetAutomationRulesRequest -
    
    Returns:
    
    Result of the BatchGetAutomationRules operation returned by the service.
    
    Throws:
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    InternalException - Internal server error.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchGetAutomationRules
```
default BatchGetAutomationRulesResponse batchGetAutomationRules(Consumer<BatchGetAutomationRulesRequest.Builder> batchGetAutomationRulesRequest)
                                                         throws AccessDeniedException,
                                                                InternalException,
                                                                InvalidAccessException,
                                                                InvalidInputException,
                                                                LimitExceededException,
                                                                ResourceNotFoundException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                SecurityHubException
```
    Retrieves a list of details for automation rules based on rule Amazon Resource Names (ARNs).
    
    This is a convenience which creates an instance of the BatchGetAutomationRulesRequest.Builder avoiding the need to create one manually via BatchGetAutomationRulesRequest.builder()
    
    Parameters:
    
    batchGetAutomationRulesRequest - A Consumer that will call methods on BatchGetAutomationRulesRequest.Builder to create a request.
    
    Returns:
    
    Result of the BatchGetAutomationRules operation returned by the service.
    
    Throws:
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    InternalException - Internal server error.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchGetSecurityControls
```
default BatchGetSecurityControlsResponse batchGetSecurityControls(BatchGetSecurityControlsRequest batchGetSecurityControlsRequest)
                                                           throws InternalException,
                                                                  LimitExceededException,
                                                                  InvalidAccessException,
                                                                  InvalidInputException,
                                                                  AwsServiceException,
                                                                  SdkClientException,
                                                                  SecurityHubException
```
    Provides details about a batch of security controls for the current Amazon Web Services account and Amazon Web Services Region.
    
    Parameters:
    
    batchGetSecurityControlsRequest -
    
    Returns:
    
    Result of the BatchGetSecurityControls operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchGetSecurityControls
```
default BatchGetSecurityControlsResponse batchGetSecurityControls(Consumer<BatchGetSecurityControlsRequest.Builder> batchGetSecurityControlsRequest)
                                                           throws InternalException,
                                                                  LimitExceededException,
                                                                  InvalidAccessException,
                                                                  InvalidInputException,
                                                                  AwsServiceException,
                                                                  SdkClientException,
                                                                  SecurityHubException
```
    Provides details about a batch of security controls for the current Amazon Web Services account and Amazon Web Services Region.
    
    This is a convenience which creates an instance of the BatchGetSecurityControlsRequest.Builder avoiding the need to create one manually via BatchGetSecurityControlsRequest.builder()
    
    Parameters:
    
    batchGetSecurityControlsRequest - A Consumer that will call methods on BatchGetSecurityControlsRequest.Builder to create a request.
    
    Returns:
    
    Result of the BatchGetSecurityControls operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchGetStandardsControlAssociations
```
default BatchGetStandardsControlAssociationsResponse batchGetStandardsControlAssociations(BatchGetStandardsControlAssociationsRequest batchGetStandardsControlAssociationsRequest)
                                                                                   throws InternalException,
                                                                                          LimitExceededException,
                                                                                          InvalidAccessException,
                                                                                          InvalidInputException,
                                                                                          AwsServiceException,
                                                                                          SdkClientException,
                                                                                          SecurityHubException
```
    For a batch of security controls and standards, identifies whether each control is currently enabled or disabled in a standard.
    
    Parameters:
    
    batchGetStandardsControlAssociationsRequest -
    
    Returns:
    
    Result of the BatchGetStandardsControlAssociations operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchGetStandardsControlAssociations
```
default BatchGetStandardsControlAssociationsResponse batchGetStandardsControlAssociations(Consumer<BatchGetStandardsControlAssociationsRequest.Builder> batchGetStandardsControlAssociationsRequest)
                                                                                   throws InternalException,
                                                                                          LimitExceededException,
                                                                                          InvalidAccessException,
                                                                                          InvalidInputException,
                                                                                          AwsServiceException,
                                                                                          SdkClientException,
                                                                                          SecurityHubException
```
    For a batch of security controls and standards, identifies whether each control is currently enabled or disabled in a standard.
    
    This is a convenience which creates an instance of the BatchGetStandardsControlAssociationsRequest.Builder avoiding the need to create one manually via BatchGetStandardsControlAssociationsRequest.builder()
    
    Parameters:
    
    batchGetStandardsControlAssociationsRequest - A Consumer that will call methods on BatchGetStandardsControlAssociationsRequest.Builder to create a request.
    
    Returns:
    
    Result of the BatchGetStandardsControlAssociations operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchImportFindings
```
default BatchImportFindingsResponse batchImportFindings(BatchImportFindingsRequest batchImportFindingsRequest)
                                                 throws InternalException,
                                                        InvalidInputException,
                                                        LimitExceededException,
                                                        InvalidAccessException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        SecurityHubException
```
    Imports security findings generated by a finding provider into Security Hub. This action is requested by the finding provider to import its findings into Security Hub.
    
    BatchImportFindings must be called by one of the following:
    - The Amazon Web Services account that is associated with a finding if you are using the default product ARN or are a partner sending findings from within a customer's Amazon Web Services account. In these cases, the identifier of the account that you are calling BatchImportFindings from needs to be the same as the AwsAccountId attribute for the finding.
    - An Amazon Web Services account that Security Hub has allow-listed for an official partner integration. In this case, you can call BatchImportFindings from the allow-listed account and send findings from different customer accounts in the same batch.
    The maximum allowed size for a finding is 240 Kb. An error is returned for any finding larger than 240 Kb.
    
    After a finding is created, BatchImportFindings cannot be used to update the following finding fields and objects, which Security Hub customers use to manage their investigation workflow.
    - Note
    - UserDefinedFields
    - VerificationState
    - Workflow
    Finding providers also should not use BatchImportFindings to update the following attributes.
    - Confidence
    - Criticality
    - RelatedFindings
    - Severity
    - Types
    Instead, finding providers use FindingProviderFields to provide values for these attributes.
    Parameters:
    
    batchImportFindingsRequest -
    
    Returns:
    
    Result of the BatchImportFindings operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchImportFindings
```
default BatchImportFindingsResponse batchImportFindings(Consumer<BatchImportFindingsRequest.Builder> batchImportFindingsRequest)
                                                 throws InternalException,
                                                        InvalidInputException,
                                                        LimitExceededException,
                                                        InvalidAccessException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        SecurityHubException
```
    Imports security findings generated by a finding provider into Security Hub. This action is requested by the finding provider to import its findings into Security Hub.
    
    BatchImportFindings must be called by one of the following:
    - The Amazon Web Services account that is associated with a finding if you are using the default product ARN or are a partner sending findings from within a customer's Amazon Web Services account. In these cases, the identifier of the account that you are calling BatchImportFindings from needs to be the same as the AwsAccountId attribute for the finding.
    - An Amazon Web Services account that Security Hub has allow-listed for an official partner integration. In this case, you can call BatchImportFindings from the allow-listed account and send findings from different customer accounts in the same batch.
    The maximum allowed size for a finding is 240 Kb. An error is returned for any finding larger than 240 Kb.
    
    After a finding is created, BatchImportFindings cannot be used to update the following finding fields and objects, which Security Hub customers use to manage their investigation workflow.
    - Note
    - UserDefinedFields
    - VerificationState
    - Workflow
    Finding providers also should not use BatchImportFindings to update the following attributes.
    - Confidence
    - Criticality
    - RelatedFindings
    - Severity
    - Types
    Instead, finding providers use FindingProviderFields to provide values for these attributes.
    
    This is a convenience which creates an instance of the BatchImportFindingsRequest.Builder avoiding the need to create one manually via BatchImportFindingsRequest.builder()
    Parameters:
    
    batchImportFindingsRequest - A Consumer that will call methods on BatchImportFindingsRequest.Builder to create a request.
    
    Returns:
    
    Result of the BatchImportFindings operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchUpdateAutomationRules
```
default BatchUpdateAutomationRulesResponse batchUpdateAutomationRules(BatchUpdateAutomationRulesRequest batchUpdateAutomationRulesRequest)
                                                               throws InternalException,
                                                                      InvalidAccessException,
                                                                      InvalidInputException,
                                                                      LimitExceededException,
                                                                      ResourceNotFoundException,
                                                                      AwsServiceException,
                                                                      SdkClientException,
                                                                      SecurityHubException
```
    Updates one or more automation rules based on rule Amazon Resource Names (ARNs) and input parameters.
    
    Parameters:
    
    batchUpdateAutomationRulesRequest -
    
    Returns:
    
    Result of the BatchUpdateAutomationRules operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchUpdateAutomationRules
```
default BatchUpdateAutomationRulesResponse batchUpdateAutomationRules(Consumer<BatchUpdateAutomationRulesRequest.Builder> batchUpdateAutomationRulesRequest)
                                                               throws InternalException,
                                                                      InvalidAccessException,
                                                                      InvalidInputException,
                                                                      LimitExceededException,
                                                                      ResourceNotFoundException,
                                                                      AwsServiceException,
                                                                      SdkClientException,
                                                                      SecurityHubException
```
    Updates one or more automation rules based on rule Amazon Resource Names (ARNs) and input parameters.
    
    This is a convenience which creates an instance of the BatchUpdateAutomationRulesRequest.Builder avoiding the need to create one manually via BatchUpdateAutomationRulesRequest.builder()
    
    Parameters:
    
    batchUpdateAutomationRulesRequest - A Consumer that will call methods on BatchUpdateAutomationRulesRequest.Builder to create a request.
    
    Returns:
    
    Result of the BatchUpdateAutomationRules operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchUpdateFindings
```
default BatchUpdateFindingsResponse batchUpdateFindings(BatchUpdateFindingsRequest batchUpdateFindingsRequest)
                                                 throws InternalException,
                                                        InvalidInputException,
                                                        LimitExceededException,
                                                        InvalidAccessException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        SecurityHubException
```
    Used by Security Hub customers to update information about their investigation into a finding. Requested by administrator accounts or member accounts. Administrator accounts can update findings for their account and their member accounts. Member accounts can update findings for their account.
    
    Updates from BatchUpdateFindings do not affect the value of UpdatedAt for a finding.
    
    Administrator and member accounts can use BatchUpdateFindings to update the following finding fields and objects.
    - Confidence
    - Criticality
    - Note
    - RelatedFindings
    - Severity
    - Types
    - UserDefinedFields
    - VerificationState
    - Workflow
    You can configure IAM policies to restrict access to fields and field values. For example, you might not want member accounts to be able to suppress findings or change the finding severity. See Configuring access to BatchUpdateFindings in the Security Hub User Guide.
    Parameters:
    
    batchUpdateFindingsRequest -
    
    Returns:
    
    Result of the BatchUpdateFindings operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchUpdateFindings
```
default BatchUpdateFindingsResponse batchUpdateFindings(Consumer<BatchUpdateFindingsRequest.Builder> batchUpdateFindingsRequest)
                                                 throws InternalException,
                                                        InvalidInputException,
                                                        LimitExceededException,
                                                        InvalidAccessException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        SecurityHubException
```
    Used by Security Hub customers to update information about their investigation into a finding. Requested by administrator accounts or member accounts. Administrator accounts can update findings for their account and their member accounts. Member accounts can update findings for their account.
    
    Updates from BatchUpdateFindings do not affect the value of UpdatedAt for a finding.
    
    Administrator and member accounts can use BatchUpdateFindings to update the following finding fields and objects.
    - Confidence
    - Criticality
    - Note
    - RelatedFindings
    - Severity
    - Types
    - UserDefinedFields
    - VerificationState
    - Workflow
    You can configure IAM policies to restrict access to fields and field values. For example, you might not want member accounts to be able to suppress findings or change the finding severity. See Configuring access to BatchUpdateFindings in the Security Hub User Guide.
    
    This is a convenience which creates an instance of the BatchUpdateFindingsRequest.Builder avoiding the need to create one manually via BatchUpdateFindingsRequest.builder()
    Parameters:
    
    batchUpdateFindingsRequest - A Consumer that will call methods on BatchUpdateFindingsRequest.Builder to create a request.
    
    Returns:
    
    Result of the BatchUpdateFindings operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchUpdateStandardsControlAssociations
```
default BatchUpdateStandardsControlAssociationsResponse batchUpdateStandardsControlAssociations(BatchUpdateStandardsControlAssociationsRequest batchUpdateStandardsControlAssociationsRequest)
                                                                                         throws InternalException,
                                                                                                LimitExceededException,
                                                                                                InvalidAccessException,
                                                                                                InvalidInputException,
                                                                                                AwsServiceException,
                                                                                                SdkClientException,
                                                                                                SecurityHubException
```
    For a batch of security controls and standards, this operation updates the enablement status of a control in a standard.
    
    Parameters:
    
    batchUpdateStandardsControlAssociationsRequest -
    
    Returns:
    
    Result of the BatchUpdateStandardsControlAssociations operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchUpdateStandardsControlAssociations
```
default BatchUpdateStandardsControlAssociationsResponse batchUpdateStandardsControlAssociations(Consumer<BatchUpdateStandardsControlAssociationsRequest.Builder> batchUpdateStandardsControlAssociationsRequest)
                                                                                         throws InternalException,
                                                                                                LimitExceededException,
                                                                                                InvalidAccessException,
                                                                                                InvalidInputException,
                                                                                                AwsServiceException,
                                                                                                SdkClientException,
                                                                                                SecurityHubException
```
    For a batch of security controls and standards, this operation updates the enablement status of a control in a standard.
    
    This is a convenience which creates an instance of the BatchUpdateStandardsControlAssociationsRequest.Builder avoiding the need to create one manually via BatchUpdateStandardsControlAssociationsRequest.builder()
    
    Parameters:
    
    batchUpdateStandardsControlAssociationsRequest - A Consumer that will call methods on BatchUpdateStandardsControlAssociationsRequest.Builder to create a request.
    
    Returns:
    
    Result of the BatchUpdateStandardsControlAssociations operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createActionTarget
```
default CreateActionTargetResponse createActionTarget(CreateActionTargetRequest createActionTargetRequest)
                                               throws InternalException,
                                                      InvalidInputException,
                                                      InvalidAccessException,
                                                      LimitExceededException,
                                                      ResourceConflictException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      SecurityHubException
```
    Creates a custom action target in Security Hub.
    
    You can use custom actions on findings and insights in Security Hub to trigger target actions in Amazon CloudWatch Events.
    
    Parameters:
    
    createActionTargetRequest -
    
    Returns:
    
    Result of the CreateActionTarget operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceConflictException - The resource specified in the request conflicts with an existing resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createActionTarget
```
default CreateActionTargetResponse createActionTarget(Consumer<CreateActionTargetRequest.Builder> createActionTargetRequest)
                                               throws InternalException,
                                                      InvalidInputException,
                                                      InvalidAccessException,
                                                      LimitExceededException,
                                                      ResourceConflictException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      SecurityHubException
```
    Creates a custom action target in Security Hub.
    
    You can use custom actions on findings and insights in Security Hub to trigger target actions in Amazon CloudWatch Events.
    
    This is a convenience which creates an instance of the CreateActionTargetRequest.Builder avoiding the need to create one manually via CreateActionTargetRequest.builder()
    
    Parameters:
    
    createActionTargetRequest - A Consumer that will call methods on CreateActionTargetRequest.Builder to create a request.
    
    Returns:
    
    Result of the CreateActionTarget operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceConflictException - The resource specified in the request conflicts with an existing resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createAutomationRule
```
default CreateAutomationRuleResponse createAutomationRule(CreateAutomationRuleRequest createAutomationRuleRequest)
                                                   throws AccessDeniedException,
                                                          InternalException,
                                                          InvalidAccessException,
                                                          InvalidInputException,
                                                          LimitExceededException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          SecurityHubException
```
    Creates an automation rule based on input parameters.
    
    Parameters:
    
    createAutomationRuleRequest -
    
    Returns:
    
    Result of the CreateAutomationRule operation returned by the service.
    
    Throws:
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    InternalException - Internal server error.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createAutomationRule
```
default CreateAutomationRuleResponse createAutomationRule(Consumer<CreateAutomationRuleRequest.Builder> createAutomationRuleRequest)
                                                   throws AccessDeniedException,
                                                          InternalException,
                                                          InvalidAccessException,
                                                          InvalidInputException,
                                                          LimitExceededException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          SecurityHubException
```
    Creates an automation rule based on input parameters.
    
    This is a convenience which creates an instance of the CreateAutomationRuleRequest.Builder avoiding the need to create one manually via CreateAutomationRuleRequest.builder()
    
    Parameters:
    
    createAutomationRuleRequest - A Consumer that will call methods on CreateAutomationRuleRequest.Builder to create a request.
    
    Returns:
    
    Result of the CreateAutomationRule operation returned by the service.
    
    Throws:
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    InternalException - Internal server error.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createFindingAggregator
```
default CreateFindingAggregatorResponse createFindingAggregator(CreateFindingAggregatorRequest createFindingAggregatorRequest)
                                                         throws InternalException,
                                                                LimitExceededException,
                                                                InvalidAccessException,
                                                                AccessDeniedException,
                                                                InvalidInputException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                SecurityHubException
```
    Used to enable finding aggregation. Must be called from the aggregation Region.
    
    For more details about cross-Region replication, see Configuring finding aggregation in the Security Hub User Guide.
    
    Parameters:
    
    createFindingAggregatorRequest -
    
    Returns:
    
    Result of the CreateFindingAggregator operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createFindingAggregator
```
default CreateFindingAggregatorResponse createFindingAggregator(Consumer<CreateFindingAggregatorRequest.Builder> createFindingAggregatorRequest)
                                                         throws InternalException,
                                                                LimitExceededException,
                                                                InvalidAccessException,
                                                                AccessDeniedException,
                                                                InvalidInputException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                SecurityHubException
```
    Used to enable finding aggregation. Must be called from the aggregation Region.
    
    For more details about cross-Region replication, see Configuring finding aggregation in the Security Hub User Guide.
    
    This is a convenience which creates an instance of the CreateFindingAggregatorRequest.Builder avoiding the need to create one manually via CreateFindingAggregatorRequest.builder()
    
    Parameters:
    
    createFindingAggregatorRequest - A Consumer that will call methods on CreateFindingAggregatorRequest.Builder to create a request.
    
    Returns:
    
    Result of the CreateFindingAggregator operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createInsight
```
default CreateInsightResponse createInsight(CreateInsightRequest createInsightRequest)
                                     throws InternalException,
                                            InvalidInputException,
                                            LimitExceededException,
                                            InvalidAccessException,
                                            ResourceConflictException,
                                            AwsServiceException,
                                            SdkClientException,
                                            SecurityHubException
```
    Creates a custom insight in Security Hub. An insight is a consolidation of findings that relate to a security issue that requires attention or remediation.
    
    To group the related findings in the insight, use the GroupByAttribute.
    
    Parameters:
    
    createInsightRequest -
    
    Returns:
    
    Result of the CreateInsight operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceConflictException - The resource specified in the request conflicts with an existing resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createInsight
```
default CreateInsightResponse createInsight(Consumer<CreateInsightRequest.Builder> createInsightRequest)
                                     throws InternalException,
                                            InvalidInputException,
                                            LimitExceededException,
                                            InvalidAccessException,
                                            ResourceConflictException,
                                            AwsServiceException,
                                            SdkClientException,
                                            SecurityHubException
```
    Creates a custom insight in Security Hub. An insight is a consolidation of findings that relate to a security issue that requires attention or remediation.
    
    To group the related findings in the insight, use the GroupByAttribute.
    
    This is a convenience which creates an instance of the CreateInsightRequest.Builder avoiding the need to create one manually via CreateInsightRequest.builder()
    
    Parameters:
    
    createInsightRequest - A Consumer that will call methods on CreateInsightRequest.Builder to create a request.
    
    Returns:
    
    Result of the CreateInsight operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceConflictException - The resource specified in the request conflicts with an existing resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createMembers
```
default CreateMembersResponse createMembers(CreateMembersRequest createMembersRequest)
                                     throws InternalException,
                                            InvalidInputException,
                                            LimitExceededException,
                                            InvalidAccessException,
                                            ResourceConflictException,
                                            AwsServiceException,
                                            SdkClientException,
                                            SecurityHubException
```
    Creates a member association in Security Hub between the specified accounts and the account used to make the request, which is the administrator account. If you are integrated with Organizations, then the administrator account is designated by the organization management account.
    
    CreateMembers is always used to add accounts that are not organization members.
    
    For accounts that are managed using Organizations, CreateMembers is only used in the following cases:
    - Security Hub is not configured to automatically add new organization accounts.
    - The account was disassociated or deleted in Security Hub.
    This action can only be used by an account that has Security Hub enabled. To enable Security Hub, you can use the EnableSecurityHub operation.
    
    For accounts that are not organization members, you create the account association and then send an invitation to the member account. To send the invitation, you use the InviteMembers operation. If the account owner accepts the invitation, the account becomes a member account in Security Hub.
    
    Accounts that are managed using Organizations do not receive an invitation. They automatically become a member account in Security Hub.
    - If the organization account does not have Security Hub enabled, then Security Hub and the default standards are automatically enabled. Note that Security Hub cannot be enabled automatically for the organization management account. The organization management account must enable Security Hub before the administrator account enables it as a member account.
    - For organization accounts that already have Security Hub enabled, Security Hub does not make any other changes to those accounts. It does not change their enabled standards or controls.
    A permissions policy is added that permits the administrator account to view the findings generated in the member account.
    
    To remove the association between the administrator and member accounts, use the DisassociateFromMasterAccount or DisassociateMembers operation.
    Parameters:
    
    createMembersRequest -
    
    Returns:
    
    Result of the CreateMembers operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceConflictException - The resource specified in the request conflicts with an existing resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createMembers
```
default CreateMembersResponse createMembers(Consumer<CreateMembersRequest.Builder> createMembersRequest)
                                     throws InternalException,
                                            InvalidInputException,
                                            LimitExceededException,
                                            InvalidAccessException,
                                            ResourceConflictException,
                                            AwsServiceException,
                                            SdkClientException,
                                            SecurityHubException
```
    Creates a member association in Security Hub between the specified accounts and the account used to make the request, which is the administrator account. If you are integrated with Organizations, then the administrator account is designated by the organization management account.
    
    CreateMembers is always used to add accounts that are not organization members.
    
    For accounts that are managed using Organizations, CreateMembers is only used in the following cases:
    - Security Hub is not configured to automatically add new organization accounts.
    - The account was disassociated or deleted in Security Hub.
    This action can only be used by an account that has Security Hub enabled. To enable Security Hub, you can use the EnableSecurityHub operation.
    
    For accounts that are not organization members, you create the account association and then send an invitation to the member account. To send the invitation, you use the InviteMembers operation. If the account owner accepts the invitation, the account becomes a member account in Security Hub.
    
    Accounts that are managed using Organizations do not receive an invitation. They automatically become a member account in Security Hub.
    - If the organization account does not have Security Hub enabled, then Security Hub and the default standards are automatically enabled. Note that Security Hub cannot be enabled automatically for the organization management account. The organization management account must enable Security Hub before the administrator account enables it as a member account.
    - For organization accounts that already have Security Hub enabled, Security Hub does not make any other changes to those accounts. It does not change their enabled standards or controls.
    A permissions policy is added that permits the administrator account to view the findings generated in the member account.
    
    To remove the association between the administrator and member accounts, use the DisassociateFromMasterAccount or DisassociateMembers operation.
    
    This is a convenience which creates an instance of the CreateMembersRequest.Builder avoiding the need to create one manually via CreateMembersRequest.builder()
    Parameters:
    
    createMembersRequest - A Consumer that will call methods on CreateMembersRequest.Builder to create a request.
    
    Returns:
    
    Result of the CreateMembers operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceConflictException - The resource specified in the request conflicts with an existing resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - declineInvitations
```
default DeclineInvitationsResponse declineInvitations(DeclineInvitationsRequest declineInvitationsRequest)
                                               throws InternalException,
                                                      InvalidInputException,
                                                      InvalidAccessException,
                                                      ResourceNotFoundException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      SecurityHubException
```
    Declines invitations to become a member account.
    
    A prospective member account uses this operation to decline an invitation to become a member.
    
    This operation is only called by member accounts that aren't part of an organization. Organization accounts don't receive invitations.
    
    Parameters:
    
    declineInvitationsRequest -
    
    Returns:
    
    Result of the DeclineInvitations operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - declineInvitations
```
default DeclineInvitationsResponse declineInvitations(Consumer<DeclineInvitationsRequest.Builder> declineInvitationsRequest)
                                               throws InternalException,
                                                      InvalidInputException,
                                                      InvalidAccessException,
                                                      ResourceNotFoundException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      SecurityHubException
```
    Declines invitations to become a member account.
    
    A prospective member account uses this operation to decline an invitation to become a member.
    
    This operation is only called by member accounts that aren't part of an organization. Organization accounts don't receive invitations.
    
    This is a convenience which creates an instance of the DeclineInvitationsRequest.Builder avoiding the need to create one manually via DeclineInvitationsRequest.builder()
    
    Parameters:
    
    declineInvitationsRequest - A Consumer that will call methods on DeclineInvitationsRequest.Builder to create a request.
    
    Returns:
    
    Result of the DeclineInvitations operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteActionTarget
```
default DeleteActionTargetResponse deleteActionTarget(DeleteActionTargetRequest deleteActionTargetRequest)
                                               throws InternalException,
                                                      InvalidInputException,
                                                      InvalidAccessException,
                                                      ResourceNotFoundException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      SecurityHubException
```
    Deletes a custom action target from Security Hub.
    
    Deleting a custom action target does not affect any findings or insights that were already sent to Amazon CloudWatch Events using the custom action.
    
    Parameters:
    
    deleteActionTargetRequest -
    
    Returns:
    
    Result of the DeleteActionTarget operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteActionTarget
```
default DeleteActionTargetResponse deleteActionTarget(Consumer<DeleteActionTargetRequest.Builder> deleteActionTargetRequest)
                                               throws InternalException,
                                                      InvalidInputException,
                                                      InvalidAccessException,
                                                      ResourceNotFoundException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      SecurityHubException
```
    Deletes a custom action target from Security Hub.
    
    Deleting a custom action target does not affect any findings or insights that were already sent to Amazon CloudWatch Events using the custom action.
    
    This is a convenience which creates an instance of the DeleteActionTargetRequest.Builder avoiding the need to create one manually via DeleteActionTargetRequest.builder()
    
    Parameters:
    
    deleteActionTargetRequest - A Consumer that will call methods on DeleteActionTargetRequest.Builder to create a request.
    
    Returns:
    
    Result of the DeleteActionTarget operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteFindingAggregator
```
default DeleteFindingAggregatorResponse deleteFindingAggregator(DeleteFindingAggregatorRequest deleteFindingAggregatorRequest)
                                                         throws InternalException,
                                                                LimitExceededException,
                                                                InvalidAccessException,
                                                                AccessDeniedException,
                                                                InvalidInputException,
                                                                ResourceNotFoundException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                SecurityHubException
```
    Deletes a finding aggregator. When you delete the finding aggregator, you stop finding aggregation.
    
    When you stop finding aggregation, findings that were already aggregated to the aggregation Region are still visible from the aggregation Region. New findings and finding updates are not aggregated.
    
    Parameters:
    
    deleteFindingAggregatorRequest -
    
    Returns:
    
    Result of the DeleteFindingAggregator operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteFindingAggregator
```
default DeleteFindingAggregatorResponse deleteFindingAggregator(Consumer<DeleteFindingAggregatorRequest.Builder> deleteFindingAggregatorRequest)
                                                         throws InternalException,
                                                                LimitExceededException,
                                                                InvalidAccessException,
                                                                AccessDeniedException,
                                                                InvalidInputException,
                                                                ResourceNotFoundException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                SecurityHubException
```
    Deletes a finding aggregator. When you delete the finding aggregator, you stop finding aggregation.
    
    When you stop finding aggregation, findings that were already aggregated to the aggregation Region are still visible from the aggregation Region. New findings and finding updates are not aggregated.
    
    This is a convenience which creates an instance of the DeleteFindingAggregatorRequest.Builder avoiding the need to create one manually via DeleteFindingAggregatorRequest.builder()
    
    Parameters:
    
    deleteFindingAggregatorRequest - A Consumer that will call methods on DeleteFindingAggregatorRequest.Builder to create a request.
    
    Returns:
    
    Result of the DeleteFindingAggregator operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteInsight
```
default DeleteInsightResponse deleteInsight(DeleteInsightRequest deleteInsightRequest)
                                     throws InternalException,
                                            InvalidInputException,
                                            InvalidAccessException,
                                            LimitExceededException,
                                            ResourceNotFoundException,
                                            AwsServiceException,
                                            SdkClientException,
                                            SecurityHubException
```
    Deletes the insight specified by the InsightArn.
    
    Parameters:
    
    deleteInsightRequest -
    
    Returns:
    
    Result of the DeleteInsight operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteInsight
```
default DeleteInsightResponse deleteInsight(Consumer<DeleteInsightRequest.Builder> deleteInsightRequest)
                                     throws InternalException,
                                            InvalidInputException,
                                            InvalidAccessException,
                                            LimitExceededException,
                                            ResourceNotFoundException,
                                            AwsServiceException,
                                            SdkClientException,
                                            SecurityHubException
```
    Deletes the insight specified by the InsightArn.
    
    This is a convenience which creates an instance of the DeleteInsightRequest.Builder avoiding the need to create one manually via DeleteInsightRequest.builder()
    
    Parameters:
    
    deleteInsightRequest - A Consumer that will call methods on DeleteInsightRequest.Builder to create a request.
    
    Returns:
    
    Result of the DeleteInsight operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteInvitations
```
default DeleteInvitationsResponse deleteInvitations(DeleteInvitationsRequest deleteInvitationsRequest)
                                             throws InternalException,
                                                    InvalidInputException,
                                                    LimitExceededException,
                                                    ResourceNotFoundException,
                                                    InvalidAccessException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    SecurityHubException
```
    Deletes invitations received by the Amazon Web Services account to become a member account.
    
    A Security Hub administrator account can use this operation to delete invitations sent to one or more member accounts.
    
    This operation is only used to delete invitations that are sent to member accounts that aren't part of an organization. Organization accounts don't receive invitations.
    
    Parameters:
    
    deleteInvitationsRequest -
    
    Returns:
    
    Result of the DeleteInvitations operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteInvitations
```
default DeleteInvitationsResponse deleteInvitations(Consumer<DeleteInvitationsRequest.Builder> deleteInvitationsRequest)
                                             throws InternalException,
                                                    InvalidInputException,
                                                    LimitExceededException,
                                                    ResourceNotFoundException,
                                                    InvalidAccessException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    SecurityHubException
```
    Deletes invitations received by the Amazon Web Services account to become a member account.
    
    A Security Hub administrator account can use this operation to delete invitations sent to one or more member accounts.
    
    This operation is only used to delete invitations that are sent to member accounts that aren't part of an organization. Organization accounts don't receive invitations.
    
    This is a convenience which creates an instance of the DeleteInvitationsRequest.Builder avoiding the need to create one manually via DeleteInvitationsRequest.builder()
    
    Parameters:
    
    deleteInvitationsRequest - A Consumer that will call methods on DeleteInvitationsRequest.Builder to create a request.
    
    Returns:
    
    Result of the DeleteInvitations operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteMembers
```
default DeleteMembersResponse deleteMembers(DeleteMembersRequest deleteMembersRequest)
                                     throws InternalException,
                                            InvalidInputException,
                                            InvalidAccessException,
                                            LimitExceededException,
                                            ResourceNotFoundException,
                                            AwsServiceException,
                                            SdkClientException,
                                            SecurityHubException
```
    Deletes the specified member accounts from Security Hub.
    
    Can be used to delete member accounts that belong to an organization as well as member accounts that were invited manually.
    
    Parameters:
    
    deleteMembersRequest -
    
    Returns:
    
    Result of the DeleteMembers operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteMembers
```
default DeleteMembersResponse deleteMembers(Consumer<DeleteMembersRequest.Builder> deleteMembersRequest)
                                     throws InternalException,
                                            InvalidInputException,
                                            InvalidAccessException,
                                            LimitExceededException,
                                            ResourceNotFoundException,
                                            AwsServiceException,
                                            SdkClientException,
                                            SecurityHubException
```
    Deletes the specified member accounts from Security Hub.
    
    Can be used to delete member accounts that belong to an organization as well as member accounts that were invited manually.
    
    This is a convenience which creates an instance of the DeleteMembersRequest.Builder avoiding the need to create one manually via DeleteMembersRequest.builder()
    
    Parameters:
    
    deleteMembersRequest - A Consumer that will call methods on DeleteMembersRequest.Builder to create a request.
    
    Returns:
    
    Result of the DeleteMembers operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeActionTargets
```
default DescribeActionTargetsResponse describeActionTargets(DescribeActionTargetsRequest describeActionTargetsRequest)
                                                     throws InternalException,
                                                            InvalidInputException,
                                                            InvalidAccessException,
                                                            ResourceNotFoundException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            SecurityHubException
```
    Returns a list of the custom action targets in Security Hub in your account.
    
    Parameters:
    
    describeActionTargetsRequest -
    
    Returns:
    
    Result of the DescribeActionTargets operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeActionTargets
```
default DescribeActionTargetsResponse describeActionTargets(Consumer<DescribeActionTargetsRequest.Builder> describeActionTargetsRequest)
                                                     throws InternalException,
                                                            InvalidInputException,
                                                            InvalidAccessException,
                                                            ResourceNotFoundException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            SecurityHubException
```
    Returns a list of the custom action targets in Security Hub in your account.
    
    This is a convenience which creates an instance of the DescribeActionTargetsRequest.Builder avoiding the need to create one manually via DescribeActionTargetsRequest.builder()
    
    Parameters:
    
    describeActionTargetsRequest - A Consumer that will call methods on DescribeActionTargetsRequest.Builder to create a request.
    
    Returns:
    
    Result of the DescribeActionTargets operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeActionTargetsPaginator
```
default DescribeActionTargetsIterable describeActionTargetsPaginator(DescribeActionTargetsRequest describeActionTargetsRequest)
                                                              throws InternalException,
                                                                     InvalidInputException,
                                                                     InvalidAccessException,
                                                                     ResourceNotFoundException,
                                                                     AwsServiceException,
                                                                     SdkClientException,
                                                                     SecurityHubException
```
    Returns a list of the custom action targets in Security Hub in your account.
    
    This is a variant of describeActionTargets(software.amazon.awssdk.services.securityhub.model.DescribeActionTargetsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.DescribeActionTargetsIterable responses = client.describeActionTargetsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.DescribeActionTargetsIterable responses = client
             .describeActionTargetsPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.DescribeActionTargetsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.DescribeActionTargetsIterable responses = client.describeActionTargetsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the describeActionTargets(software.amazon.awssdk.services.securityhub.model.DescribeActionTargetsRequest) operation.
    Parameters:
    
    describeActionTargetsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeActionTargetsPaginator
```
default DescribeActionTargetsIterable describeActionTargetsPaginator(Consumer<DescribeActionTargetsRequest.Builder> describeActionTargetsRequest)
                                                              throws InternalException,
                                                                     InvalidInputException,
                                                                     InvalidAccessException,
                                                                     ResourceNotFoundException,
                                                                     AwsServiceException,
                                                                     SdkClientException,
                                                                     SecurityHubException
```
    Returns a list of the custom action targets in Security Hub in your account.
    
    This is a variant of describeActionTargets(software.amazon.awssdk.services.securityhub.model.DescribeActionTargetsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.DescribeActionTargetsIterable responses = client.describeActionTargetsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.DescribeActionTargetsIterable responses = client
             .describeActionTargetsPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.DescribeActionTargetsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.DescribeActionTargetsIterable responses = client.describeActionTargetsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the describeActionTargets(software.amazon.awssdk.services.securityhub.model.DescribeActionTargetsRequest) operation.
    
    This is a convenience which creates an instance of the DescribeActionTargetsRequest.Builder avoiding the need to create one manually via DescribeActionTargetsRequest.builder()
    Parameters:
    
    describeActionTargetsRequest - A Consumer that will call methods on DescribeActionTargetsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeHub
```
default DescribeHubResponse describeHub(DescribeHubRequest describeHubRequest)
                                 throws InternalException,
                                        LimitExceededException,
                                        InvalidAccessException,
                                        InvalidInputException,
                                        ResourceNotFoundException,
                                        AwsServiceException,
                                        SdkClientException,
                                        SecurityHubException
```
    Returns details about the Hub resource in your account, including the HubArn and the time when you enabled Security Hub.
    
    Parameters:
    
    describeHubRequest -
    
    Returns:
    
    Result of the DescribeHub operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeHub
```
default DescribeHubResponse describeHub(Consumer<DescribeHubRequest.Builder> describeHubRequest)
                                 throws InternalException,
                                        LimitExceededException,
                                        InvalidAccessException,
                                        InvalidInputException,
                                        ResourceNotFoundException,
                                        AwsServiceException,
                                        SdkClientException,
                                        SecurityHubException
```
    Returns details about the Hub resource in your account, including the HubArn and the time when you enabled Security Hub.
    
    This is a convenience which creates an instance of the DescribeHubRequest.Builder avoiding the need to create one manually via DescribeHubRequest.builder()
    
    Parameters:
    
    describeHubRequest - A Consumer that will call methods on DescribeHubRequest.Builder to create a request.
    
    Returns:
    
    Result of the DescribeHub operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeOrganizationConfiguration
```
default DescribeOrganizationConfigurationResponse describeOrganizationConfiguration(DescribeOrganizationConfigurationRequest describeOrganizationConfigurationRequest)
                                                                             throws InternalException,
                                                                                    InvalidInputException,
                                                                                    InvalidAccessException,
                                                                                    LimitExceededException,
                                                                                    AwsServiceException,
                                                                                    SdkClientException,
                                                                                    SecurityHubException
```
    Returns information about the Organizations configuration for Security Hub. Can only be called from a Security Hub administrator account.
    
    Parameters:
    
    describeOrganizationConfigurationRequest -
    
    Returns:
    
    Result of the DescribeOrganizationConfiguration operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeOrganizationConfiguration
```
default DescribeOrganizationConfigurationResponse describeOrganizationConfiguration(Consumer<DescribeOrganizationConfigurationRequest.Builder> describeOrganizationConfigurationRequest)
                                                                             throws InternalException,
                                                                                    InvalidInputException,
                                                                                    InvalidAccessException,
                                                                                    LimitExceededException,
                                                                                    AwsServiceException,
                                                                                    SdkClientException,
                                                                                    SecurityHubException
```
    Returns information about the Organizations configuration for Security Hub. Can only be called from a Security Hub administrator account.
    
    This is a convenience which creates an instance of the DescribeOrganizationConfigurationRequest.Builder avoiding the need to create one manually via DescribeOrganizationConfigurationRequest.builder()
    
    Parameters:
    
    describeOrganizationConfigurationRequest - A Consumer that will call methods on DescribeOrganizationConfigurationRequest.Builder to create a request.
    
    Returns:
    
    Result of the DescribeOrganizationConfiguration operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeProducts
```
default DescribeProductsResponse describeProducts(DescribeProductsRequest describeProductsRequest)
                                           throws InternalException,
                                                  LimitExceededException,
                                                  InvalidAccessException,
                                                  InvalidInputException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  SecurityHubException
```
    Returns information about product integrations in Security Hub.
    
    You can optionally provide an integration ARN. If you provide an integration ARN, then the results only include that integration.
    
    If you do not provide an integration ARN, then the results include all of the available product integrations.
    
    Parameters:
    
    describeProductsRequest -
    
    Returns:
    
    Result of the DescribeProducts operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeProducts
```
default DescribeProductsResponse describeProducts(Consumer<DescribeProductsRequest.Builder> describeProductsRequest)
                                           throws InternalException,
                                                  LimitExceededException,
                                                  InvalidAccessException,
                                                  InvalidInputException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  SecurityHubException
```
    Returns information about product integrations in Security Hub.
    
    You can optionally provide an integration ARN. If you provide an integration ARN, then the results only include that integration.
    
    If you do not provide an integration ARN, then the results include all of the available product integrations.
    
    This is a convenience which creates an instance of the DescribeProductsRequest.Builder avoiding the need to create one manually via DescribeProductsRequest.builder()
    
    Parameters:
    
    describeProductsRequest - A Consumer that will call methods on DescribeProductsRequest.Builder to create a request.
    
    Returns:
    
    Result of the DescribeProducts operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeProductsPaginator
```
default DescribeProductsIterable describeProductsPaginator(DescribeProductsRequest describeProductsRequest)
                                                    throws InternalException,
                                                           LimitExceededException,
                                                           InvalidAccessException,
                                                           InvalidInputException,
                                                           AwsServiceException,
                                                           SdkClientException,
                                                           SecurityHubException
```
    Returns information about product integrations in Security Hub.
    
    You can optionally provide an integration ARN. If you provide an integration ARN, then the results only include that integration.
    
    If you do not provide an integration ARN, then the results include all of the available product integrations.
    
    This is a variant of describeProducts(software.amazon.awssdk.services.securityhub.model.DescribeProductsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.DescribeProductsIterable responses = client.describeProductsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.DescribeProductsIterable responses = client
             .describeProductsPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.DescribeProductsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.DescribeProductsIterable responses = client.describeProductsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the describeProducts(software.amazon.awssdk.services.securityhub.model.DescribeProductsRequest) operation.
    Parameters:
    
    describeProductsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeProductsPaginator
```
default DescribeProductsIterable describeProductsPaginator(Consumer<DescribeProductsRequest.Builder> describeProductsRequest)
                                                    throws InternalException,
                                                           LimitExceededException,
                                                           InvalidAccessException,
                                                           InvalidInputException,
                                                           AwsServiceException,
                                                           SdkClientException,
                                                           SecurityHubException
```
    Returns information about product integrations in Security Hub.
    
    You can optionally provide an integration ARN. If you provide an integration ARN, then the results only include that integration.
    
    If you do not provide an integration ARN, then the results include all of the available product integrations.
    
    This is a variant of describeProducts(software.amazon.awssdk.services.securityhub.model.DescribeProductsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.DescribeProductsIterable responses = client.describeProductsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.DescribeProductsIterable responses = client
             .describeProductsPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.DescribeProductsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.DescribeProductsIterable responses = client.describeProductsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the describeProducts(software.amazon.awssdk.services.securityhub.model.DescribeProductsRequest) operation.
    
    This is a convenience which creates an instance of the DescribeProductsRequest.Builder avoiding the need to create one manually via DescribeProductsRequest.builder()
    Parameters:
    
    describeProductsRequest - A Consumer that will call methods on DescribeProductsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeStandards
```
default DescribeStandardsResponse describeStandards(DescribeStandardsRequest describeStandardsRequest)
                                             throws InternalException,
                                                    InvalidInputException,
                                                    InvalidAccessException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    SecurityHubException
```
    Returns a list of the available standards in Security Hub.
    
    For each standard, the results include the standard ARN, the name, and a description.
    
    Parameters:
    
    describeStandardsRequest -
    
    Returns:
    
    Result of the DescribeStandards operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeStandards
```
default DescribeStandardsResponse describeStandards(Consumer<DescribeStandardsRequest.Builder> describeStandardsRequest)
                                             throws InternalException,
                                                    InvalidInputException,
                                                    InvalidAccessException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    SecurityHubException
```
    Returns a list of the available standards in Security Hub.
    
    For each standard, the results include the standard ARN, the name, and a description.
    
    This is a convenience which creates an instance of the DescribeStandardsRequest.Builder avoiding the need to create one manually via DescribeStandardsRequest.builder()
    
    Parameters:
    
    describeStandardsRequest - A Consumer that will call methods on DescribeStandardsRequest.Builder to create a request.
    
    Returns:
    
    Result of the DescribeStandards operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeStandardsPaginator
```
default DescribeStandardsIterable describeStandardsPaginator(DescribeStandardsRequest describeStandardsRequest)
                                                      throws InternalException,
                                                             InvalidInputException,
                                                             InvalidAccessException,
                                                             AwsServiceException,
                                                             SdkClientException,
                                                             SecurityHubException
```
    Returns a list of the available standards in Security Hub.
    
    For each standard, the results include the standard ARN, the name, and a description.
    
    This is a variant of describeStandards(software.amazon.awssdk.services.securityhub.model.DescribeStandardsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.DescribeStandardsIterable responses = client.describeStandardsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.DescribeStandardsIterable responses = client
             .describeStandardsPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.DescribeStandardsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.DescribeStandardsIterable responses = client.describeStandardsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the describeStandards(software.amazon.awssdk.services.securityhub.model.DescribeStandardsRequest) operation.
    Parameters:
    
    describeStandardsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeStandardsPaginator
```
default DescribeStandardsIterable describeStandardsPaginator(Consumer<DescribeStandardsRequest.Builder> describeStandardsRequest)
                                                      throws InternalException,
                                                             InvalidInputException,
                                                             InvalidAccessException,
                                                             AwsServiceException,
                                                             SdkClientException,
                                                             SecurityHubException
```
    Returns a list of the available standards in Security Hub.
    
    For each standard, the results include the standard ARN, the name, and a description.
    
    This is a variant of describeStandards(software.amazon.awssdk.services.securityhub.model.DescribeStandardsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.DescribeStandardsIterable responses = client.describeStandardsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.DescribeStandardsIterable responses = client
             .describeStandardsPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.DescribeStandardsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.DescribeStandardsIterable responses = client.describeStandardsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the describeStandards(software.amazon.awssdk.services.securityhub.model.DescribeStandardsRequest) operation.
    
    This is a convenience which creates an instance of the DescribeStandardsRequest.Builder avoiding the need to create one manually via DescribeStandardsRequest.builder()
    Parameters:
    
    describeStandardsRequest - A Consumer that will call methods on DescribeStandardsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeStandardsControls
```
default DescribeStandardsControlsResponse describeStandardsControls(DescribeStandardsControlsRequest describeStandardsControlsRequest)
                                                             throws InternalException,
                                                                    InvalidInputException,
                                                                    InvalidAccessException,
                                                                    ResourceNotFoundException,
                                                                    AwsServiceException,
                                                                    SdkClientException,
                                                                    SecurityHubException
```
    Returns a list of security standards controls.
    
    For each control, the results include information about whether it is currently enabled, the severity, and a link to remediation information.
    
    Parameters:
    
    describeStandardsControlsRequest -
    
    Returns:
    
    Result of the DescribeStandardsControls operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeStandardsControls
```
default DescribeStandardsControlsResponse describeStandardsControls(Consumer<DescribeStandardsControlsRequest.Builder> describeStandardsControlsRequest)
                                                             throws InternalException,
                                                                    InvalidInputException,
                                                                    InvalidAccessException,
                                                                    ResourceNotFoundException,
                                                                    AwsServiceException,
                                                                    SdkClientException,
                                                                    SecurityHubException
```
    Returns a list of security standards controls.
    
    For each control, the results include information about whether it is currently enabled, the severity, and a link to remediation information.
    
    This is a convenience which creates an instance of the DescribeStandardsControlsRequest.Builder avoiding the need to create one manually via DescribeStandardsControlsRequest.builder()
    
    Parameters:
    
    describeStandardsControlsRequest - A Consumer that will call methods on DescribeStandardsControlsRequest.Builder to create a request.
    
    Returns:
    
    Result of the DescribeStandardsControls operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeStandardsControlsPaginator
```
default DescribeStandardsControlsIterable describeStandardsControlsPaginator(DescribeStandardsControlsRequest describeStandardsControlsRequest)
                                                                      throws InternalException,
                                                                             InvalidInputException,
                                                                             InvalidAccessException,
                                                                             ResourceNotFoundException,
                                                                             AwsServiceException,
                                                                             SdkClientException,
                                                                             SecurityHubException
```
    Returns a list of security standards controls.
    
    For each control, the results include information about whether it is currently enabled, the severity, and a link to remediation information.
    
    This is a variant of describeStandardsControls(software.amazon.awssdk.services.securityhub.model.DescribeStandardsControlsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.DescribeStandardsControlsIterable responses = client.describeStandardsControlsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.DescribeStandardsControlsIterable responses = client
             .describeStandardsControlsPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.DescribeStandardsControlsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.DescribeStandardsControlsIterable responses = client.describeStandardsControlsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the describeStandardsControls(software.amazon.awssdk.services.securityhub.model.DescribeStandardsControlsRequest) operation.
    Parameters:
    
    describeStandardsControlsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeStandardsControlsPaginator
```
default DescribeStandardsControlsIterable describeStandardsControlsPaginator(Consumer<DescribeStandardsControlsRequest.Builder> describeStandardsControlsRequest)
                                                                      throws InternalException,
                                                                             InvalidInputException,
                                                                             InvalidAccessException,
                                                                             ResourceNotFoundException,
                                                                             AwsServiceException,
                                                                             SdkClientException,
                                                                             SecurityHubException
```
    Returns a list of security standards controls.
    
    For each control, the results include information about whether it is currently enabled, the severity, and a link to remediation information.
    
    This is a variant of describeStandardsControls(software.amazon.awssdk.services.securityhub.model.DescribeStandardsControlsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.DescribeStandardsControlsIterable responses = client.describeStandardsControlsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.DescribeStandardsControlsIterable responses = client
             .describeStandardsControlsPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.DescribeStandardsControlsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.DescribeStandardsControlsIterable responses = client.describeStandardsControlsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the describeStandardsControls(software.amazon.awssdk.services.securityhub.model.DescribeStandardsControlsRequest) operation.
    
    This is a convenience which creates an instance of the DescribeStandardsControlsRequest.Builder avoiding the need to create one manually via DescribeStandardsControlsRequest.builder()
    Parameters:
    
    describeStandardsControlsRequest - A Consumer that will call methods on DescribeStandardsControlsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - disableImportFindingsForProduct
```
default DisableImportFindingsForProductResponse disableImportFindingsForProduct(DisableImportFindingsForProductRequest disableImportFindingsForProductRequest)
                                                                         throws InternalException,
                                                                                InvalidInputException,
                                                                                ResourceNotFoundException,
                                                                                InvalidAccessException,
                                                                                LimitExceededException,
                                                                                AwsServiceException,
                                                                                SdkClientException,
                                                                                SecurityHubException
```
    Disables the integration of the specified product with Security Hub. After the integration is disabled, findings from that product are no longer sent to Security Hub.
    
    Parameters:
    
    disableImportFindingsForProductRequest -
    
    Returns:
    
    Result of the DisableImportFindingsForProduct operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - disableImportFindingsForProduct
```
default DisableImportFindingsForProductResponse disableImportFindingsForProduct(Consumer<DisableImportFindingsForProductRequest.Builder> disableImportFindingsForProductRequest)
                                                                         throws InternalException,
                                                                                InvalidInputException,
                                                                                ResourceNotFoundException,
                                                                                InvalidAccessException,
                                                                                LimitExceededException,
                                                                                AwsServiceException,
                                                                                SdkClientException,
                                                                                SecurityHubException
```
    Disables the integration of the specified product with Security Hub. After the integration is disabled, findings from that product are no longer sent to Security Hub.
    
    This is a convenience which creates an instance of the DisableImportFindingsForProductRequest.Builder avoiding the need to create one manually via DisableImportFindingsForProductRequest.builder()
    
    Parameters:
    
    disableImportFindingsForProductRequest - A Consumer that will call methods on DisableImportFindingsForProductRequest.Builder to create a request.
    
    Returns:
    
    Result of the DisableImportFindingsForProduct operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - disableOrganizationAdminAccount
```
default DisableOrganizationAdminAccountResponse disableOrganizationAdminAccount(DisableOrganizationAdminAccountRequest disableOrganizationAdminAccountRequest)
                                                                         throws InternalException,
                                                                                InvalidInputException,
                                                                                InvalidAccessException,
                                                                                LimitExceededException,
                                                                                AwsServiceException,
                                                                                SdkClientException,
                                                                                SecurityHubException
```
    Disables a Security Hub administrator account. Can only be called by the organization management account.
    
    Parameters:
    
    disableOrganizationAdminAccountRequest -
    
    Returns:
    
    Result of the DisableOrganizationAdminAccount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - disableOrganizationAdminAccount
```
default DisableOrganizationAdminAccountResponse disableOrganizationAdminAccount(Consumer<DisableOrganizationAdminAccountRequest.Builder> disableOrganizationAdminAccountRequest)
                                                                         throws InternalException,
                                                                                InvalidInputException,
                                                                                InvalidAccessException,
                                                                                LimitExceededException,
                                                                                AwsServiceException,
                                                                                SdkClientException,
                                                                                SecurityHubException
```
    Disables a Security Hub administrator account. Can only be called by the organization management account.
    
    This is a convenience which creates an instance of the DisableOrganizationAdminAccountRequest.Builder avoiding the need to create one manually via DisableOrganizationAdminAccountRequest.builder()
    
    Parameters:
    
    disableOrganizationAdminAccountRequest - A Consumer that will call methods on DisableOrganizationAdminAccountRequest.Builder to create a request.
    
    Returns:
    
    Result of the DisableOrganizationAdminAccount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - disableSecurityHub
```
default DisableSecurityHubResponse disableSecurityHub(DisableSecurityHubRequest disableSecurityHubRequest)
                                               throws InternalException,
                                                      LimitExceededException,
                                                      InvalidAccessException,
                                                      ResourceNotFoundException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      SecurityHubException
```
    Disables Security Hub in your account only in the current Region. To disable Security Hub in all Regions, you must submit one request per Region where you have enabled Security Hub.
    
    When you disable Security Hub for an administrator account, it doesn't disable Security Hub for any associated member accounts.
    
    When you disable Security Hub, your existing findings and insights and any Security Hub configuration settings are deleted after 90 days and cannot be recovered. Any standards that were enabled are disabled, and your administrator and member account associations are removed.
    
    If you want to save your existing findings, you must export them before you disable Security Hub.
    
    Parameters:
    
    disableSecurityHubRequest -
    
    Returns:
    
    Result of the DisableSecurityHub operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - disableSecurityHub
```
default DisableSecurityHubResponse disableSecurityHub(Consumer<DisableSecurityHubRequest.Builder> disableSecurityHubRequest)
                                               throws InternalException,
                                                      LimitExceededException,
                                                      InvalidAccessException,
                                                      ResourceNotFoundException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      SecurityHubException
```
    Disables Security Hub in your account only in the current Region. To disable Security Hub in all Regions, you must submit one request per Region where you have enabled Security Hub.
    
    When you disable Security Hub for an administrator account, it doesn't disable Security Hub for any associated member accounts.
    
    When you disable Security Hub, your existing findings and insights and any Security Hub configuration settings are deleted after 90 days and cannot be recovered. Any standards that were enabled are disabled, and your administrator and member account associations are removed.
    
    If you want to save your existing findings, you must export them before you disable Security Hub.
    
    This is a convenience which creates an instance of the DisableSecurityHubRequest.Builder avoiding the need to create one manually via DisableSecurityHubRequest.builder()
    
    Parameters:
    
    disableSecurityHubRequest - A Consumer that will call methods on DisableSecurityHubRequest.Builder to create a request.
    
    Returns:
    
    Result of the DisableSecurityHub operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - disableSecurityHub
```
default DisableSecurityHubResponse disableSecurityHub()
                                               throws InternalException,
                                                      LimitExceededException,
                                                      InvalidAccessException,
                                                      ResourceNotFoundException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      SecurityHubException
```
    Disables Security Hub in your account only in the current Region. To disable Security Hub in all Regions, you must submit one request per Region where you have enabled Security Hub.
    
    When you disable Security Hub for an administrator account, it doesn't disable Security Hub for any associated member accounts.
    
    When you disable Security Hub, your existing findings and insights and any Security Hub configuration settings are deleted after 90 days and cannot be recovered. Any standards that were enabled are disabled, and your administrator and member account associations are removed.
    
    If you want to save your existing findings, you must export them before you disable Security Hub.
    
    Returns:
    
    Result of the DisableSecurityHub operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    disableSecurityHub(DisableSecurityHubRequest), AWS API Documentation
  - disassociateFromAdministratorAccount
```
default DisassociateFromAdministratorAccountResponse disassociateFromAdministratorAccount(DisassociateFromAdministratorAccountRequest disassociateFromAdministratorAccountRequest)
                                                                                   throws InternalException,
                                                                                          InvalidInputException,
                                                                                          InvalidAccessException,
                                                                                          LimitExceededException,
                                                                                          ResourceNotFoundException,
                                                                                          AwsServiceException,
                                                                                          SdkClientException,
                                                                                          SecurityHubException
```
    Disassociates the current Security Hub member account from the associated administrator account.
    
    This operation is only used by accounts that are not part of an organization. For organization accounts, only the administrator account can disassociate a member account.
    
    Parameters:
    
    disassociateFromAdministratorAccountRequest -
    
    Returns:
    
    Result of the DisassociateFromAdministratorAccount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - disassociateFromAdministratorAccount
```
default DisassociateFromAdministratorAccountResponse disassociateFromAdministratorAccount(Consumer<DisassociateFromAdministratorAccountRequest.Builder> disassociateFromAdministratorAccountRequest)
                                                                                   throws InternalException,
                                                                                          InvalidInputException,
                                                                                          InvalidAccessException,
                                                                                          LimitExceededException,
                                                                                          ResourceNotFoundException,
                                                                                          AwsServiceException,
                                                                                          SdkClientException,
                                                                                          SecurityHubException
```
    Disassociates the current Security Hub member account from the associated administrator account.
    
    This operation is only used by accounts that are not part of an organization. For organization accounts, only the administrator account can disassociate a member account.
    
    This is a convenience which creates an instance of the DisassociateFromAdministratorAccountRequest.Builder avoiding the need to create one manually via DisassociateFromAdministratorAccountRequest.builder()
    
    Parameters:
    
    disassociateFromAdministratorAccountRequest - A Consumer that will call methods on DisassociateFromAdministratorAccountRequest.Builder to create a request.
    
    Returns:
    
    Result of the DisassociateFromAdministratorAccount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - disassociateFromMasterAccount
```
@Deprecated
default DisassociateFromMasterAccountResponse disassociateFromMasterAccount(DisassociateFromMasterAccountRequest disassociateFromMasterAccountRequest)
                                                                                 throws InternalException,
                                                                                        InvalidInputException,
                                                                                        InvalidAccessException,
                                                                                        LimitExceededException,
                                                                                        ResourceNotFoundException,
                                                                                        AwsServiceException,
                                                                                        SdkClientException,
                                                                                        SecurityHubException
```
    Deprecated. This API has been deprecated, use DisassociateFromAdministratorAccount API instead.
    
    This method is deprecated. Instead, use DisassociateFromAdministratorAccount.
    
    The Security Hub console continues to use DisassociateFromMasterAccount. It will eventually change to use DisassociateFromAdministratorAccount. Any IAM policies that specifically control access to this function must continue to use DisassociateFromMasterAccount. You should also add DisassociateFromAdministratorAccount to your policies to ensure that the correct permissions are in place after the console begins to use DisassociateFromAdministratorAccount.
    
    Disassociates the current Security Hub member account from the associated administrator account.
    
    This operation is only used by accounts that are not part of an organization. For organization accounts, only the administrator account can disassociate a member account.
    
    Parameters:
    
    disassociateFromMasterAccountRequest -
    
    Returns:
    
    Result of the DisassociateFromMasterAccount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - disassociateFromMasterAccount
```
@Deprecated
default DisassociateFromMasterAccountResponse disassociateFromMasterAccount(Consumer<DisassociateFromMasterAccountRequest.Builder> disassociateFromMasterAccountRequest)
                                                                                 throws InternalException,
                                                                                        InvalidInputException,
                                                                                        InvalidAccessException,
                                                                                        LimitExceededException,
                                                                                        ResourceNotFoundException,
                                                                                        AwsServiceException,
                                                                                        SdkClientException,
                                                                                        SecurityHubException
```
    Deprecated. This API has been deprecated, use DisassociateFromAdministratorAccount API instead.
    
    This method is deprecated. Instead, use DisassociateFromAdministratorAccount.
    
    The Security Hub console continues to use DisassociateFromMasterAccount. It will eventually change to use DisassociateFromAdministratorAccount. Any IAM policies that specifically control access to this function must continue to use DisassociateFromMasterAccount. You should also add DisassociateFromAdministratorAccount to your policies to ensure that the correct permissions are in place after the console begins to use DisassociateFromAdministratorAccount.
    
    Disassociates the current Security Hub member account from the associated administrator account.
    
    This operation is only used by accounts that are not part of an organization. For organization accounts, only the administrator account can disassociate a member account.
    
    This is a convenience which creates an instance of the DisassociateFromMasterAccountRequest.Builder avoiding the need to create one manually via DisassociateFromMasterAccountRequest.builder()
    
    Parameters:
    
    disassociateFromMasterAccountRequest - A Consumer that will call methods on DisassociateFromMasterAccountRequest.Builder to create a request.
    
    Returns:
    
    Result of the DisassociateFromMasterAccount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - disassociateMembers
```
default DisassociateMembersResponse disassociateMembers(DisassociateMembersRequest disassociateMembersRequest)
                                                 throws InternalException,
                                                        InvalidInputException,
                                                        InvalidAccessException,
                                                        LimitExceededException,
                                                        ResourceNotFoundException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        SecurityHubException
```
    Disassociates the specified member accounts from the associated administrator account.
    
    Can be used to disassociate both accounts that are managed using Organizations and accounts that were invited manually.
    
    Parameters:
    
    disassociateMembersRequest -
    
    Returns:
    
    Result of the DisassociateMembers operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - disassociateMembers
```
default DisassociateMembersResponse disassociateMembers(Consumer<DisassociateMembersRequest.Builder> disassociateMembersRequest)
                                                 throws InternalException,
                                                        InvalidInputException,
                                                        InvalidAccessException,
                                                        LimitExceededException,
                                                        ResourceNotFoundException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        SecurityHubException
```
    Disassociates the specified member accounts from the associated administrator account.
    
    Can be used to disassociate both accounts that are managed using Organizations and accounts that were invited manually.
    
    This is a convenience which creates an instance of the DisassociateMembersRequest.Builder avoiding the need to create one manually via DisassociateMembersRequest.builder()
    
    Parameters:
    
    disassociateMembersRequest - A Consumer that will call methods on DisassociateMembersRequest.Builder to create a request.
    
    Returns:
    
    Result of the DisassociateMembers operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - enableImportFindingsForProduct
```
default EnableImportFindingsForProductResponse enableImportFindingsForProduct(EnableImportFindingsForProductRequest enableImportFindingsForProductRequest)
                                                                       throws InternalException,
                                                                              InvalidInputException,
                                                                              InvalidAccessException,
                                                                              ResourceConflictException,
                                                                              LimitExceededException,
                                                                              AwsServiceException,
                                                                              SdkClientException,
                                                                              SecurityHubException
```
    Enables the integration of a partner product with Security Hub. Integrated products send findings to Security Hub.
    
    When you enable a product integration, a permissions policy that grants permission for the product to send findings to Security Hub is applied.
    
    Parameters:
    
    enableImportFindingsForProductRequest -
    
    Returns:
    
    Result of the EnableImportFindingsForProduct operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceConflictException - The resource specified in the request conflicts with an existing resource.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - enableImportFindingsForProduct
```
default EnableImportFindingsForProductResponse enableImportFindingsForProduct(Consumer<EnableImportFindingsForProductRequest.Builder> enableImportFindingsForProductRequest)
                                                                       throws InternalException,
                                                                              InvalidInputException,
                                                                              InvalidAccessException,
                                                                              ResourceConflictException,
                                                                              LimitExceededException,
                                                                              AwsServiceException,
                                                                              SdkClientException,
                                                                              SecurityHubException
```
    Enables the integration of a partner product with Security Hub. Integrated products send findings to Security Hub.
    
    When you enable a product integration, a permissions policy that grants permission for the product to send findings to Security Hub is applied.
    
    This is a convenience which creates an instance of the EnableImportFindingsForProductRequest.Builder avoiding the need to create one manually via EnableImportFindingsForProductRequest.builder()
    
    Parameters:
    
    enableImportFindingsForProductRequest - A Consumer that will call methods on EnableImportFindingsForProductRequest.Builder to create a request.
    
    Returns:
    
    Result of the EnableImportFindingsForProduct operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceConflictException - The resource specified in the request conflicts with an existing resource.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - enableOrganizationAdminAccount
```
default EnableOrganizationAdminAccountResponse enableOrganizationAdminAccount(EnableOrganizationAdminAccountRequest enableOrganizationAdminAccountRequest)
                                                                       throws InternalException,
                                                                              InvalidInputException,
                                                                              InvalidAccessException,
                                                                              LimitExceededException,
                                                                              AwsServiceException,
                                                                              SdkClientException,
                                                                              SecurityHubException
```
    Designates the Security Hub administrator account for an organization. Can only be called by the organization management account.
    
    Parameters:
    
    enableOrganizationAdminAccountRequest -
    
    Returns:
    
    Result of the EnableOrganizationAdminAccount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - enableOrganizationAdminAccount
```
default EnableOrganizationAdminAccountResponse enableOrganizationAdminAccount(Consumer<EnableOrganizationAdminAccountRequest.Builder> enableOrganizationAdminAccountRequest)
                                                                       throws InternalException,
                                                                              InvalidInputException,
                                                                              InvalidAccessException,
                                                                              LimitExceededException,
                                                                              AwsServiceException,
                                                                              SdkClientException,
                                                                              SecurityHubException
```
    Designates the Security Hub administrator account for an organization. Can only be called by the organization management account.
    
    This is a convenience which creates an instance of the EnableOrganizationAdminAccountRequest.Builder avoiding the need to create one manually via EnableOrganizationAdminAccountRequest.builder()
    
    Parameters:
    
    enableOrganizationAdminAccountRequest - A Consumer that will call methods on EnableOrganizationAdminAccountRequest.Builder to create a request.
    
    Returns:
    
    Result of the EnableOrganizationAdminAccount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - enableSecurityHub
```
default EnableSecurityHubResponse enableSecurityHub(EnableSecurityHubRequest enableSecurityHubRequest)
                                             throws InternalException,
                                                    LimitExceededException,
                                                    InvalidAccessException,
                                                    ResourceConflictException,
                                                    AccessDeniedException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    SecurityHubException
```
    Enables Security Hub for your account in the current Region or the Region you specify in the request.
    
    When you enable Security Hub, you grant to Security Hub the permissions necessary to gather findings from other services that are integrated with Security Hub.
    
    When you use the EnableSecurityHub operation to enable Security Hub, you also automatically enable the following standards:
    - Center for Internet Security (CIS) Amazon Web Services Foundations Benchmark v1.2.0
    - Amazon Web Services Foundational Security Best Practices
    Other standards are not automatically enabled.
    
    To opt out of automatically enabled standards, set EnableDefaultStandards to false.
    
    After you enable Security Hub, to enable a standard, use the BatchEnableStandards operation. To disable a standard, use the BatchDisableStandards operation.
    
    To learn more, see the setup information in the Security Hub User Guide.
    Parameters:
    
    enableSecurityHubRequest -
    
    Returns:
    
    Result of the EnableSecurityHub operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceConflictException - The resource specified in the request conflicts with an existing resource.
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - enableSecurityHub
```
default EnableSecurityHubResponse enableSecurityHub(Consumer<EnableSecurityHubRequest.Builder> enableSecurityHubRequest)
                                             throws InternalException,
                                                    LimitExceededException,
                                                    InvalidAccessException,
                                                    ResourceConflictException,
                                                    AccessDeniedException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    SecurityHubException
```
    Enables Security Hub for your account in the current Region or the Region you specify in the request.
    
    When you enable Security Hub, you grant to Security Hub the permissions necessary to gather findings from other services that are integrated with Security Hub.
    
    When you use the EnableSecurityHub operation to enable Security Hub, you also automatically enable the following standards:
    - Center for Internet Security (CIS) Amazon Web Services Foundations Benchmark v1.2.0
    - Amazon Web Services Foundational Security Best Practices
    Other standards are not automatically enabled.
    
    To opt out of automatically enabled standards, set EnableDefaultStandards to false.
    
    After you enable Security Hub, to enable a standard, use the BatchEnableStandards operation. To disable a standard, use the BatchDisableStandards operation.
    
    To learn more, see the setup information in the Security Hub User Guide.
    
    This is a convenience which creates an instance of the EnableSecurityHubRequest.Builder avoiding the need to create one manually via EnableSecurityHubRequest.builder()
    Parameters:
    
    enableSecurityHubRequest - A Consumer that will call methods on EnableSecurityHubRequest.Builder to create a request.
    
    Returns:
    
    Result of the EnableSecurityHub operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceConflictException - The resource specified in the request conflicts with an existing resource.
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - enableSecurityHub
```
default EnableSecurityHubResponse enableSecurityHub()
                                             throws InternalException,
                                                    LimitExceededException,
                                                    InvalidAccessException,
                                                    ResourceConflictException,
                                                    AccessDeniedException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    SecurityHubException
```
    Enables Security Hub for your account in the current Region or the Region you specify in the request.
    
    When you enable Security Hub, you grant to Security Hub the permissions necessary to gather findings from other services that are integrated with Security Hub.
    
    When you use the EnableSecurityHub operation to enable Security Hub, you also automatically enable the following standards:
    - Center for Internet Security (CIS) Amazon Web Services Foundations Benchmark v1.2.0
    - Amazon Web Services Foundational Security Best Practices
    Other standards are not automatically enabled.
    
    To opt out of automatically enabled standards, set EnableDefaultStandards to false.
    
    After you enable Security Hub, to enable a standard, use the BatchEnableStandards operation. To disable a standard, use the BatchDisableStandards operation.
    
    To learn more, see the setup information in the Security Hub User Guide.
    Returns:
    
    Result of the EnableSecurityHub operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceConflictException - The resource specified in the request conflicts with an existing resource.
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    enableSecurityHub(EnableSecurityHubRequest), AWS API Documentation
  - getAdministratorAccount
```
default GetAdministratorAccountResponse getAdministratorAccount(GetAdministratorAccountRequest getAdministratorAccountRequest)
                                                         throws InternalException,
                                                                InvalidInputException,
                                                                InvalidAccessException,
                                                                LimitExceededException,
                                                                ResourceNotFoundException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                SecurityHubException
```
    Provides the details for the Security Hub administrator account for the current member account.
    
    Can be used by both member accounts that are managed using Organizations and accounts that were invited manually.
    
    Parameters:
    
    getAdministratorAccountRequest -
    
    Returns:
    
    Result of the GetAdministratorAccount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getAdministratorAccount
```
default GetAdministratorAccountResponse getAdministratorAccount(Consumer<GetAdministratorAccountRequest.Builder> getAdministratorAccountRequest)
                                                         throws InternalException,
                                                                InvalidInputException,
                                                                InvalidAccessException,
                                                                LimitExceededException,
                                                                ResourceNotFoundException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                SecurityHubException
```
    Provides the details for the Security Hub administrator account for the current member account.
    
    Can be used by both member accounts that are managed using Organizations and accounts that were invited manually.
    
    This is a convenience which creates an instance of the GetAdministratorAccountRequest.Builder avoiding the need to create one manually via GetAdministratorAccountRequest.builder()
    
    Parameters:
    
    getAdministratorAccountRequest - A Consumer that will call methods on GetAdministratorAccountRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetAdministratorAccount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getEnabledStandards
```
default GetEnabledStandardsResponse getEnabledStandards(GetEnabledStandardsRequest getEnabledStandardsRequest)
                                                 throws InternalException,
                                                        InvalidInputException,
                                                        InvalidAccessException,
                                                        LimitExceededException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        SecurityHubException
```
    Returns a list of the standards that are currently enabled.
    
    Parameters:
    
    getEnabledStandardsRequest -
    
    Returns:
    
    Result of the GetEnabledStandards operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getEnabledStandards
```
default GetEnabledStandardsResponse getEnabledStandards(Consumer<GetEnabledStandardsRequest.Builder> getEnabledStandardsRequest)
                                                 throws InternalException,
                                                        InvalidInputException,
                                                        InvalidAccessException,
                                                        LimitExceededException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        SecurityHubException
```
    Returns a list of the standards that are currently enabled.
    
    This is a convenience which creates an instance of the GetEnabledStandardsRequest.Builder avoiding the need to create one manually via GetEnabledStandardsRequest.builder()
    
    Parameters:
    
    getEnabledStandardsRequest - A Consumer that will call methods on GetEnabledStandardsRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetEnabledStandards operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getEnabledStandardsPaginator
```
default GetEnabledStandardsIterable getEnabledStandardsPaginator(GetEnabledStandardsRequest getEnabledStandardsRequest)
                                                          throws InternalException,
                                                                 InvalidInputException,
                                                                 InvalidAccessException,
                                                                 LimitExceededException,
                                                                 AwsServiceException,
                                                                 SdkClientException,
                                                                 SecurityHubException
```
    Returns a list of the standards that are currently enabled.
    
    This is a variant of getEnabledStandards(software.amazon.awssdk.services.securityhub.model.GetEnabledStandardsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.GetEnabledStandardsIterable responses = client.getEnabledStandardsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.GetEnabledStandardsIterable responses = client
             .getEnabledStandardsPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.GetEnabledStandardsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.GetEnabledStandardsIterable responses = client.getEnabledStandardsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the getEnabledStandards(software.amazon.awssdk.services.securityhub.model.GetEnabledStandardsRequest) operation.
    Parameters:
    
    getEnabledStandardsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getEnabledStandardsPaginator
```
default GetEnabledStandardsIterable getEnabledStandardsPaginator(Consumer<GetEnabledStandardsRequest.Builder> getEnabledStandardsRequest)
                                                          throws InternalException,
                                                                 InvalidInputException,
                                                                 InvalidAccessException,
                                                                 LimitExceededException,
                                                                 AwsServiceException,
                                                                 SdkClientException,
                                                                 SecurityHubException
```
    Returns a list of the standards that are currently enabled.
    
    This is a variant of getEnabledStandards(software.amazon.awssdk.services.securityhub.model.GetEnabledStandardsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.GetEnabledStandardsIterable responses = client.getEnabledStandardsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.GetEnabledStandardsIterable responses = client
             .getEnabledStandardsPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.GetEnabledStandardsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.GetEnabledStandardsIterable responses = client.getEnabledStandardsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the getEnabledStandards(software.amazon.awssdk.services.securityhub.model.GetEnabledStandardsRequest) operation.
    
    This is a convenience which creates an instance of the GetEnabledStandardsRequest.Builder avoiding the need to create one manually via GetEnabledStandardsRequest.builder()
    Parameters:
    
    getEnabledStandardsRequest - A Consumer that will call methods on GetEnabledStandardsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getFindingAggregator
```
default GetFindingAggregatorResponse getFindingAggregator(GetFindingAggregatorRequest getFindingAggregatorRequest)
                                                   throws InternalException,
                                                          LimitExceededException,
                                                          InvalidAccessException,
                                                          AccessDeniedException,
                                                          InvalidInputException,
                                                          ResourceNotFoundException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          SecurityHubException
```
    Returns the current finding aggregation configuration.
    
    Parameters:
    
    getFindingAggregatorRequest -
    
    Returns:
    
    Result of the GetFindingAggregator operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getFindingAggregator
```
default GetFindingAggregatorResponse getFindingAggregator(Consumer<GetFindingAggregatorRequest.Builder> getFindingAggregatorRequest)
                                                   throws InternalException,
                                                          LimitExceededException,
                                                          InvalidAccessException,
                                                          AccessDeniedException,
                                                          InvalidInputException,
                                                          ResourceNotFoundException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          SecurityHubException
```
    Returns the current finding aggregation configuration.
    
    This is a convenience which creates an instance of the GetFindingAggregatorRequest.Builder avoiding the need to create one manually via GetFindingAggregatorRequest.builder()
    
    Parameters:
    
    getFindingAggregatorRequest - A Consumer that will call methods on GetFindingAggregatorRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetFindingAggregator operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getFindingHistory
```
default GetFindingHistoryResponse getFindingHistory(GetFindingHistoryRequest getFindingHistoryRequest)
                                             throws InternalException,
                                                    InvalidInputException,
                                                    InvalidAccessException,
                                                    LimitExceededException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    SecurityHubException
```
    Returns history for a Security Hub finding in the last 90 days. The history includes changes made to any fields in the Amazon Web Services Security Finding Format (ASFF).
    
    Parameters:
    
    getFindingHistoryRequest -
    
    Returns:
    
    Result of the GetFindingHistory operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getFindingHistory
```
default GetFindingHistoryResponse getFindingHistory(Consumer<GetFindingHistoryRequest.Builder> getFindingHistoryRequest)
                                             throws InternalException,
                                                    InvalidInputException,
                                                    InvalidAccessException,
                                                    LimitExceededException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    SecurityHubException
```
    Returns history for a Security Hub finding in the last 90 days. The history includes changes made to any fields in the Amazon Web Services Security Finding Format (ASFF).
    
    This is a convenience which creates an instance of the GetFindingHistoryRequest.Builder avoiding the need to create one manually via GetFindingHistoryRequest.builder()
    
    Parameters:
    
    getFindingHistoryRequest - A Consumer that will call methods on GetFindingHistoryRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetFindingHistory operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getFindingHistoryPaginator
```
default GetFindingHistoryIterable getFindingHistoryPaginator(GetFindingHistoryRequest getFindingHistoryRequest)
                                                      throws InternalException,
                                                             InvalidInputException,
                                                             InvalidAccessException,
                                                             LimitExceededException,
                                                             AwsServiceException,
                                                             SdkClientException,
                                                             SecurityHubException
```
    Returns history for a Security Hub finding in the last 90 days. The history includes changes made to any fields in the Amazon Web Services Security Finding Format (ASFF).
    
    This is a variant of getFindingHistory(software.amazon.awssdk.services.securityhub.model.GetFindingHistoryRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.GetFindingHistoryIterable responses = client.getFindingHistoryPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.GetFindingHistoryIterable responses = client
             .getFindingHistoryPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.GetFindingHistoryResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.GetFindingHistoryIterable responses = client.getFindingHistoryPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the getFindingHistory(software.amazon.awssdk.services.securityhub.model.GetFindingHistoryRequest) operation.
    Parameters:
    
    getFindingHistoryRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getFindingHistoryPaginator
```
default GetFindingHistoryIterable getFindingHistoryPaginator(Consumer<GetFindingHistoryRequest.Builder> getFindingHistoryRequest)
                                                      throws InternalException,
                                                             InvalidInputException,
                                                             InvalidAccessException,
                                                             LimitExceededException,
                                                             AwsServiceException,
                                                             SdkClientException,
                                                             SecurityHubException
```
    Returns history for a Security Hub finding in the last 90 days. The history includes changes made to any fields in the Amazon Web Services Security Finding Format (ASFF).
    
    This is a variant of getFindingHistory(software.amazon.awssdk.services.securityhub.model.GetFindingHistoryRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.GetFindingHistoryIterable responses = client.getFindingHistoryPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.GetFindingHistoryIterable responses = client
             .getFindingHistoryPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.GetFindingHistoryResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.GetFindingHistoryIterable responses = client.getFindingHistoryPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the getFindingHistory(software.amazon.awssdk.services.securityhub.model.GetFindingHistoryRequest) operation.
    
    This is a convenience which creates an instance of the GetFindingHistoryRequest.Builder avoiding the need to create one manually via GetFindingHistoryRequest.builder()
    Parameters:
    
    getFindingHistoryRequest - A Consumer that will call methods on GetFindingHistoryRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getFindings
```
default GetFindingsResponse getFindings(GetFindingsRequest getFindingsRequest)
                                 throws InternalException,
                                        InvalidInputException,
                                        InvalidAccessException,
                                        LimitExceededException,
                                        AwsServiceException,
                                        SdkClientException,
                                        SecurityHubException
```
    Returns a list of findings that match the specified criteria.
    
    If finding aggregation is enabled, then when you call GetFindings from the aggregation Region, the results include all of the matching findings from both the aggregation Region and the linked Regions.
    
    Parameters:
    
    getFindingsRequest -
    
    Returns:
    
    Result of the GetFindings operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getFindings
```
default GetFindingsResponse getFindings(Consumer<GetFindingsRequest.Builder> getFindingsRequest)
                                 throws InternalException,
                                        InvalidInputException,
                                        InvalidAccessException,
                                        LimitExceededException,
                                        AwsServiceException,
                                        SdkClientException,
                                        SecurityHubException
```
    Returns a list of findings that match the specified criteria.
    
    If finding aggregation is enabled, then when you call GetFindings from the aggregation Region, the results include all of the matching findings from both the aggregation Region and the linked Regions.
    
    This is a convenience which creates an instance of the GetFindingsRequest.Builder avoiding the need to create one manually via GetFindingsRequest.builder()
    
    Parameters:
    
    getFindingsRequest - A Consumer that will call methods on GetFindingsRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetFindings operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getFindings
```
default GetFindingsResponse getFindings()
                                 throws InternalException,
                                        InvalidInputException,
                                        InvalidAccessException,
                                        LimitExceededException,
                                        AwsServiceException,
                                        SdkClientException,
                                        SecurityHubException
```
    Returns a list of findings that match the specified criteria.
    
    If finding aggregation is enabled, then when you call GetFindings from the aggregation Region, the results include all of the matching findings from both the aggregation Region and the linked Regions.
    
    Returns:
    
    Result of the GetFindings operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    getFindings(GetFindingsRequest), AWS API Documentation
  - getFindingsPaginator
```
default GetFindingsIterable getFindingsPaginator()
                                          throws InternalException,
                                                 InvalidInputException,
                                                 InvalidAccessException,
                                                 LimitExceededException,
                                                 AwsServiceException,
                                                 SdkClientException,
                                                 SecurityHubException
```
    Returns a list of findings that match the specified criteria.
    
    If finding aggregation is enabled, then when you call GetFindings from the aggregation Region, the results include all of the matching findings from both the aggregation Region and the linked Regions.
    
    This is a variant of getFindings(software.amazon.awssdk.services.securityhub.model.GetFindingsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.GetFindingsIterable responses = client.getFindingsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.GetFindingsIterable responses = client.getFindingsPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.GetFindingsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.GetFindingsIterable responses = client.getFindingsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the getFindings(software.amazon.awssdk.services.securityhub.model.GetFindingsRequest) operation.
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    getFindingsPaginator(GetFindingsRequest), AWS API Documentation
  - getFindingsPaginator
```
default GetFindingsIterable getFindingsPaginator(GetFindingsRequest getFindingsRequest)
                                          throws InternalException,
                                                 InvalidInputException,
                                                 InvalidAccessException,
                                                 LimitExceededException,
                                                 AwsServiceException,
                                                 SdkClientException,
                                                 SecurityHubException
```
    Returns a list of findings that match the specified criteria.
    
    If finding aggregation is enabled, then when you call GetFindings from the aggregation Region, the results include all of the matching findings from both the aggregation Region and the linked Regions.
    
    This is a variant of getFindings(software.amazon.awssdk.services.securityhub.model.GetFindingsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.GetFindingsIterable responses = client.getFindingsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.GetFindingsIterable responses = client.getFindingsPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.GetFindingsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.GetFindingsIterable responses = client.getFindingsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the getFindings(software.amazon.awssdk.services.securityhub.model.GetFindingsRequest) operation.
    Parameters:
    
    getFindingsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getFindingsPaginator
```
default GetFindingsIterable getFindingsPaginator(Consumer<GetFindingsRequest.Builder> getFindingsRequest)
                                          throws InternalException,
                                                 InvalidInputException,
                                                 InvalidAccessException,
                                                 LimitExceededException,
                                                 AwsServiceException,
                                                 SdkClientException,
                                                 SecurityHubException
```
    Returns a list of findings that match the specified criteria.
    
    If finding aggregation is enabled, then when you call GetFindings from the aggregation Region, the results include all of the matching findings from both the aggregation Region and the linked Regions.
    
    This is a variant of getFindings(software.amazon.awssdk.services.securityhub.model.GetFindingsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.GetFindingsIterable responses = client.getFindingsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.GetFindingsIterable responses = client.getFindingsPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.GetFindingsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.GetFindingsIterable responses = client.getFindingsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the getFindings(software.amazon.awssdk.services.securityhub.model.GetFindingsRequest) operation.
    
    This is a convenience which creates an instance of the GetFindingsRequest.Builder avoiding the need to create one manually via GetFindingsRequest.builder()
    Parameters:
    
    getFindingsRequest - A Consumer that will call methods on GetFindingsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getInsightResults
```
default GetInsightResultsResponse getInsightResults(GetInsightResultsRequest getInsightResultsRequest)
                                             throws InternalException,
                                                    InvalidInputException,
                                                    InvalidAccessException,
                                                    LimitExceededException,
                                                    ResourceNotFoundException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    SecurityHubException
```
    Lists the results of the Security Hub insight specified by the insight ARN.
    
    Parameters:
    
    getInsightResultsRequest -
    
    Returns:
    
    Result of the GetInsightResults operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getInsightResults
```
default GetInsightResultsResponse getInsightResults(Consumer<GetInsightResultsRequest.Builder> getInsightResultsRequest)
                                             throws InternalException,
                                                    InvalidInputException,
                                                    InvalidAccessException,
                                                    LimitExceededException,
                                                    ResourceNotFoundException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    SecurityHubException
```
    Lists the results of the Security Hub insight specified by the insight ARN.
    
    This is a convenience which creates an instance of the GetInsightResultsRequest.Builder avoiding the need to create one manually via GetInsightResultsRequest.builder()
    
    Parameters:
    
    getInsightResultsRequest - A Consumer that will call methods on GetInsightResultsRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetInsightResults operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getInsights
```
default GetInsightsResponse getInsights(GetInsightsRequest getInsightsRequest)
                                 throws InternalException,
                                        InvalidInputException,
                                        InvalidAccessException,
                                        LimitExceededException,
                                        ResourceNotFoundException,
                                        AwsServiceException,
                                        SdkClientException,
                                        SecurityHubException
```
    Lists and describes insights for the specified insight ARNs.
    
    Parameters:
    
    getInsightsRequest -
    
    Returns:
    
    Result of the GetInsights operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getInsights
```
default GetInsightsResponse getInsights(Consumer<GetInsightsRequest.Builder> getInsightsRequest)
                                 throws InternalException,
                                        InvalidInputException,
                                        InvalidAccessException,
                                        LimitExceededException,
                                        ResourceNotFoundException,
                                        AwsServiceException,
                                        SdkClientException,
                                        SecurityHubException
```
    Lists and describes insights for the specified insight ARNs.
    
    This is a convenience which creates an instance of the GetInsightsRequest.Builder avoiding the need to create one manually via GetInsightsRequest.builder()
    
    Parameters:
    
    getInsightsRequest - A Consumer that will call methods on GetInsightsRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetInsights operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getInsightsPaginator
```
default GetInsightsIterable getInsightsPaginator(GetInsightsRequest getInsightsRequest)
                                          throws InternalException,
                                                 InvalidInputException,
                                                 InvalidAccessException,
                                                 LimitExceededException,
                                                 ResourceNotFoundException,
                                                 AwsServiceException,
                                                 SdkClientException,
                                                 SecurityHubException
```
    Lists and describes insights for the specified insight ARNs.
    
    This is a variant of getInsights(software.amazon.awssdk.services.securityhub.model.GetInsightsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.GetInsightsIterable responses = client.getInsightsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.GetInsightsIterable responses = client.getInsightsPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.GetInsightsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.GetInsightsIterable responses = client.getInsightsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the getInsights(software.amazon.awssdk.services.securityhub.model.GetInsightsRequest) operation.
    Parameters:
    
    getInsightsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getInsightsPaginator
```
default GetInsightsIterable getInsightsPaginator(Consumer<GetInsightsRequest.Builder> getInsightsRequest)
                                          throws InternalException,
                                                 InvalidInputException,
                                                 InvalidAccessException,
                                                 LimitExceededException,
                                                 ResourceNotFoundException,
                                                 AwsServiceException,
                                                 SdkClientException,
                                                 SecurityHubException
```
    Lists and describes insights for the specified insight ARNs.
    
    This is a variant of getInsights(software.amazon.awssdk.services.securityhub.model.GetInsightsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.GetInsightsIterable responses = client.getInsightsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.GetInsightsIterable responses = client.getInsightsPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.GetInsightsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.GetInsightsIterable responses = client.getInsightsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the getInsights(software.amazon.awssdk.services.securityhub.model.GetInsightsRequest) operation.
    
    This is a convenience which creates an instance of the GetInsightsRequest.Builder avoiding the need to create one manually via GetInsightsRequest.builder()
    Parameters:
    
    getInsightsRequest - A Consumer that will call methods on GetInsightsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getInvitationsCount
```
default GetInvitationsCountResponse getInvitationsCount(GetInvitationsCountRequest getInvitationsCountRequest)
                                                 throws InternalException,
                                                        InvalidInputException,
                                                        InvalidAccessException,
                                                        LimitExceededException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        SecurityHubException
```
    Returns the count of all Security Hub membership invitations that were sent to the current member account, not including the currently accepted invitation.
    
    Parameters:
    
    getInvitationsCountRequest -
    
    Returns:
    
    Result of the GetInvitationsCount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getInvitationsCount
```
default GetInvitationsCountResponse getInvitationsCount(Consumer<GetInvitationsCountRequest.Builder> getInvitationsCountRequest)
                                                 throws InternalException,
                                                        InvalidInputException,
                                                        InvalidAccessException,
                                                        LimitExceededException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        SecurityHubException
```
    Returns the count of all Security Hub membership invitations that were sent to the current member account, not including the currently accepted invitation.
    
    This is a convenience which creates an instance of the GetInvitationsCountRequest.Builder avoiding the need to create one manually via GetInvitationsCountRequest.builder()
    
    Parameters:
    
    getInvitationsCountRequest - A Consumer that will call methods on GetInvitationsCountRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetInvitationsCount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getInvitationsCount
```
default GetInvitationsCountResponse getInvitationsCount()
                                                 throws InternalException,
                                                        InvalidInputException,
                                                        InvalidAccessException,
                                                        LimitExceededException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        SecurityHubException
```
    Returns the count of all Security Hub membership invitations that were sent to the current member account, not including the currently accepted invitation.
    
    Returns:
    
    Result of the GetInvitationsCount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    getInvitationsCount(GetInvitationsCountRequest), AWS API Documentation
  - getMasterAccount
```
@Deprecated
default GetMasterAccountResponse getMasterAccount(GetMasterAccountRequest getMasterAccountRequest)
                                                       throws InternalException,
                                                              InvalidInputException,
                                                              InvalidAccessException,
                                                              LimitExceededException,
                                                              ResourceNotFoundException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              SecurityHubException
```
    Deprecated. This API has been deprecated, use GetAdministratorAccount API instead.
    
    This method is deprecated. Instead, use GetAdministratorAccount.
    
    The Security Hub console continues to use GetMasterAccount. It will eventually change to use GetAdministratorAccount. Any IAM policies that specifically control access to this function must continue to use GetMasterAccount. You should also add GetAdministratorAccount to your policies to ensure that the correct permissions are in place after the console begins to use GetAdministratorAccount.
    
    Provides the details for the Security Hub administrator account for the current member account.
    
    Can be used by both member accounts that are managed using Organizations and accounts that were invited manually.
    
    Parameters:
    
    getMasterAccountRequest -
    
    Returns:
    
    Result of the GetMasterAccount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getMasterAccount
```
@Deprecated
default GetMasterAccountResponse getMasterAccount(Consumer<GetMasterAccountRequest.Builder> getMasterAccountRequest)
                                                       throws InternalException,
                                                              InvalidInputException,
                                                              InvalidAccessException,
                                                              LimitExceededException,
                                                              ResourceNotFoundException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              SecurityHubException
```
    Deprecated. This API has been deprecated, use GetAdministratorAccount API instead.
    
    This method is deprecated. Instead, use GetAdministratorAccount.
    
    The Security Hub console continues to use GetMasterAccount. It will eventually change to use GetAdministratorAccount. Any IAM policies that specifically control access to this function must continue to use GetMasterAccount. You should also add GetAdministratorAccount to your policies to ensure that the correct permissions are in place after the console begins to use GetAdministratorAccount.
    
    Provides the details for the Security Hub administrator account for the current member account.
    
    Can be used by both member accounts that are managed using Organizations and accounts that were invited manually.
    
    This is a convenience which creates an instance of the GetMasterAccountRequest.Builder avoiding the need to create one manually via GetMasterAccountRequest.builder()
    
    Parameters:
    
    getMasterAccountRequest - A Consumer that will call methods on GetMasterAccountRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetMasterAccount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getMasterAccount
```
@Deprecated
default GetMasterAccountResponse getMasterAccount()
                                                       throws InternalException,
                                                              InvalidInputException,
                                                              InvalidAccessException,
                                                              LimitExceededException,
                                                              ResourceNotFoundException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              SecurityHubException
```
    Deprecated. This API has been deprecated, use GetAdministratorAccount API instead.
    
    This method is deprecated. Instead, use GetAdministratorAccount.
    
    The Security Hub console continues to use GetMasterAccount. It will eventually change to use GetAdministratorAccount. Any IAM policies that specifically control access to this function must continue to use GetMasterAccount. You should also add GetAdministratorAccount to your policies to ensure that the correct permissions are in place after the console begins to use GetAdministratorAccount.
    
    Provides the details for the Security Hub administrator account for the current member account.
    
    Can be used by both member accounts that are managed using Organizations and accounts that were invited manually.
    
    Returns:
    
    Result of the GetMasterAccount operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    getMasterAccount(GetMasterAccountRequest), AWS API Documentation
  - getMembers
```
default GetMembersResponse getMembers(GetMembersRequest getMembersRequest)
                               throws InternalException,
                                      InvalidInputException,
                                      InvalidAccessException,
                                      LimitExceededException,
                                      ResourceNotFoundException,
                                      AwsServiceException,
                                      SdkClientException,
                                      SecurityHubException
```
    Returns the details for the Security Hub member accounts for the specified account IDs.
    
    An administrator account can be either the delegated Security Hub administrator account for an organization or an administrator account that enabled Security Hub manually.
    
    The results include both member accounts that are managed using Organizations and accounts that were invited manually.
    
    Parameters:
    
    getMembersRequest -
    
    Returns:
    
    Result of the GetMembers operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getMembers
```
default GetMembersResponse getMembers(Consumer<GetMembersRequest.Builder> getMembersRequest)
                               throws InternalException,
                                      InvalidInputException,
                                      InvalidAccessException,
                                      LimitExceededException,
                                      ResourceNotFoundException,
                                      AwsServiceException,
                                      SdkClientException,
                                      SecurityHubException
```
    Returns the details for the Security Hub member accounts for the specified account IDs.
    
    An administrator account can be either the delegated Security Hub administrator account for an organization or an administrator account that enabled Security Hub manually.
    
    The results include both member accounts that are managed using Organizations and accounts that were invited manually.
    
    This is a convenience which creates an instance of the GetMembersRequest.Builder avoiding the need to create one manually via GetMembersRequest.builder()
    
    Parameters:
    
    getMembersRequest - A Consumer that will call methods on GetMembersRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetMembers operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - inviteMembers
```
default InviteMembersResponse inviteMembers(InviteMembersRequest inviteMembersRequest)
                                     throws InternalException,
                                            InvalidInputException,
                                            InvalidAccessException,
                                            LimitExceededException,
                                            ResourceNotFoundException,
                                            AwsServiceException,
                                            SdkClientException,
                                            SecurityHubException
```
    Invites other Amazon Web Services accounts to become member accounts for the Security Hub administrator account that the invitation is sent from.
    
    This operation is only used to invite accounts that do not belong to an organization. Organization accounts do not receive invitations.
    
    Before you can use this action to invite a member, you must first use the CreateMembers action to create the member account in Security Hub.
    
    When the account owner enables Security Hub and accepts the invitation to become a member account, the administrator account can view the findings generated from the member account.
    
    Parameters:
    
    inviteMembersRequest -
    
    Returns:
    
    Result of the InviteMembers operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - inviteMembers
```
default InviteMembersResponse inviteMembers(Consumer<InviteMembersRequest.Builder> inviteMembersRequest)
                                     throws InternalException,
                                            InvalidInputException,
                                            InvalidAccessException,
                                            LimitExceededException,
                                            ResourceNotFoundException,
                                            AwsServiceException,
                                            SdkClientException,
                                            SecurityHubException
```
    Invites other Amazon Web Services accounts to become member accounts for the Security Hub administrator account that the invitation is sent from.
    
    This operation is only used to invite accounts that do not belong to an organization. Organization accounts do not receive invitations.
    
    Before you can use this action to invite a member, you must first use the CreateMembers action to create the member account in Security Hub.
    
    When the account owner enables Security Hub and accepts the invitation to become a member account, the administrator account can view the findings generated from the member account.
    
    This is a convenience which creates an instance of the InviteMembersRequest.Builder avoiding the need to create one manually via InviteMembersRequest.builder()
    
    Parameters:
    
    inviteMembersRequest - A Consumer that will call methods on InviteMembersRequest.Builder to create a request.
    
    Returns:
    
    Result of the InviteMembers operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAutomationRules
```
default ListAutomationRulesResponse listAutomationRules(ListAutomationRulesRequest listAutomationRulesRequest)
                                                 throws AccessDeniedException,
                                                        InternalException,
                                                        InvalidAccessException,
                                                        InvalidInputException,
                                                        LimitExceededException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        SecurityHubException
```
    A list of automation rules and their metadata for the calling account.
    
    Parameters:
    
    listAutomationRulesRequest -
    
    Returns:
    
    Result of the ListAutomationRules operation returned by the service.
    
    Throws:
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    InternalException - Internal server error.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAutomationRules
```
default ListAutomationRulesResponse listAutomationRules(Consumer<ListAutomationRulesRequest.Builder> listAutomationRulesRequest)
                                                 throws AccessDeniedException,
                                                        InternalException,
                                                        InvalidAccessException,
                                                        InvalidInputException,
                                                        LimitExceededException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        SecurityHubException
```
    A list of automation rules and their metadata for the calling account.
    
    This is a convenience which creates an instance of the ListAutomationRulesRequest.Builder avoiding the need to create one manually via ListAutomationRulesRequest.builder()
    
    Parameters:
    
    listAutomationRulesRequest - A Consumer that will call methods on ListAutomationRulesRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListAutomationRules operation returned by the service.
    
    Throws:
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    InternalException - Internal server error.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listEnabledProductsForImport
```
default ListEnabledProductsForImportResponse listEnabledProductsForImport(ListEnabledProductsForImportRequest listEnabledProductsForImportRequest)
                                                                   throws InternalException,
                                                                          LimitExceededException,
                                                                          InvalidAccessException,
                                                                          AwsServiceException,
                                                                          SdkClientException,
                                                                          SecurityHubException
```
    Lists all findings-generating solutions (products) that you are subscribed to receive findings from in Security Hub.
    
    Parameters:
    
    listEnabledProductsForImportRequest -
    
    Returns:
    
    Result of the ListEnabledProductsForImport operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listEnabledProductsForImport
```
default ListEnabledProductsForImportResponse listEnabledProductsForImport(Consumer<ListEnabledProductsForImportRequest.Builder> listEnabledProductsForImportRequest)
                                                                   throws InternalException,
                                                                          LimitExceededException,
                                                                          InvalidAccessException,
                                                                          AwsServiceException,
                                                                          SdkClientException,
                                                                          SecurityHubException
```
    Lists all findings-generating solutions (products) that you are subscribed to receive findings from in Security Hub.
    
    This is a convenience which creates an instance of the ListEnabledProductsForImportRequest.Builder avoiding the need to create one manually via ListEnabledProductsForImportRequest.builder()
    
    Parameters:
    
    listEnabledProductsForImportRequest - A Consumer that will call methods on ListEnabledProductsForImportRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListEnabledProductsForImport operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listEnabledProductsForImport
```
default ListEnabledProductsForImportResponse listEnabledProductsForImport()
                                                                   throws InternalException,
                                                                          LimitExceededException,
                                                                          InvalidAccessException,
                                                                          AwsServiceException,
                                                                          SdkClientException,
                                                                          SecurityHubException
```
    Lists all findings-generating solutions (products) that you are subscribed to receive findings from in Security Hub.
    
    Returns:
    
    Result of the ListEnabledProductsForImport operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    listEnabledProductsForImport(ListEnabledProductsForImportRequest), AWS API Documentation
  - listEnabledProductsForImportPaginator
```
default ListEnabledProductsForImportIterable listEnabledProductsForImportPaginator()
                                                                            throws InternalException,
                                                                                   LimitExceededException,
                                                                                   InvalidAccessException,
                                                                                   AwsServiceException,
                                                                                   SdkClientException,
                                                                                   SecurityHubException
```
    Lists all findings-generating solutions (products) that you are subscribed to receive findings from in Security Hub.
    
    This is a variant of listEnabledProductsForImport(software.amazon.awssdk.services.securityhub.model.ListEnabledProductsForImportRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListEnabledProductsForImportIterable responses = client.listEnabledProductsForImportPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.ListEnabledProductsForImportIterable responses = client
             .listEnabledProductsForImportPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.ListEnabledProductsForImportResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListEnabledProductsForImportIterable responses = client.listEnabledProductsForImportPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listEnabledProductsForImport(software.amazon.awssdk.services.securityhub.model.ListEnabledProductsForImportRequest) operation.
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    listEnabledProductsForImportPaginator(ListEnabledProductsForImportRequest), AWS API Documentation
  - listEnabledProductsForImportPaginator
```
default ListEnabledProductsForImportIterable listEnabledProductsForImportPaginator(ListEnabledProductsForImportRequest listEnabledProductsForImportRequest)
                                                                            throws InternalException,
                                                                                   LimitExceededException,
                                                                                   InvalidAccessException,
                                                                                   AwsServiceException,
                                                                                   SdkClientException,
                                                                                   SecurityHubException
```
    Lists all findings-generating solutions (products) that you are subscribed to receive findings from in Security Hub.
    
    This is a variant of listEnabledProductsForImport(software.amazon.awssdk.services.securityhub.model.ListEnabledProductsForImportRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListEnabledProductsForImportIterable responses = client.listEnabledProductsForImportPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.ListEnabledProductsForImportIterable responses = client
             .listEnabledProductsForImportPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.ListEnabledProductsForImportResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListEnabledProductsForImportIterable responses = client.listEnabledProductsForImportPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listEnabledProductsForImport(software.amazon.awssdk.services.securityhub.model.ListEnabledProductsForImportRequest) operation.
    Parameters:
    
    listEnabledProductsForImportRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listEnabledProductsForImportPaginator
```
default ListEnabledProductsForImportIterable listEnabledProductsForImportPaginator(Consumer<ListEnabledProductsForImportRequest.Builder> listEnabledProductsForImportRequest)
                                                                            throws InternalException,
                                                                                   LimitExceededException,
                                                                                   InvalidAccessException,
                                                                                   AwsServiceException,
                                                                                   SdkClientException,
                                                                                   SecurityHubException
```
    Lists all findings-generating solutions (products) that you are subscribed to receive findings from in Security Hub.
    
    This is a variant of listEnabledProductsForImport(software.amazon.awssdk.services.securityhub.model.ListEnabledProductsForImportRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListEnabledProductsForImportIterable responses = client.listEnabledProductsForImportPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.ListEnabledProductsForImportIterable responses = client
             .listEnabledProductsForImportPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.ListEnabledProductsForImportResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListEnabledProductsForImportIterable responses = client.listEnabledProductsForImportPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listEnabledProductsForImport(software.amazon.awssdk.services.securityhub.model.ListEnabledProductsForImportRequest) operation.
    
    This is a convenience which creates an instance of the ListEnabledProductsForImportRequest.Builder avoiding the need to create one manually via ListEnabledProductsForImportRequest.builder()
    Parameters:
    
    listEnabledProductsForImportRequest - A Consumer that will call methods on ListEnabledProductsForImportRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listFindingAggregators
```
default ListFindingAggregatorsResponse listFindingAggregators(ListFindingAggregatorsRequest listFindingAggregatorsRequest)
                                                       throws InternalException,
                                                              LimitExceededException,
                                                              InvalidAccessException,
                                                              AccessDeniedException,
                                                              InvalidInputException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              SecurityHubException
```
    If finding aggregation is enabled, then ListFindingAggregators returns the ARN of the finding aggregator. You can run this operation from any Region.
    
    Parameters:
    
    listFindingAggregatorsRequest -
    
    Returns:
    
    Result of the ListFindingAggregators operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listFindingAggregators
```
default ListFindingAggregatorsResponse listFindingAggregators(Consumer<ListFindingAggregatorsRequest.Builder> listFindingAggregatorsRequest)
                                                       throws InternalException,
                                                              LimitExceededException,
                                                              InvalidAccessException,
                                                              AccessDeniedException,
                                                              InvalidInputException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              SecurityHubException
```
    If finding aggregation is enabled, then ListFindingAggregators returns the ARN of the finding aggregator. You can run this operation from any Region.
    
    This is a convenience which creates an instance of the ListFindingAggregatorsRequest.Builder avoiding the need to create one manually via ListFindingAggregatorsRequest.builder()
    
    Parameters:
    
    listFindingAggregatorsRequest - A Consumer that will call methods on ListFindingAggregatorsRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListFindingAggregators operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listFindingAggregatorsPaginator
```
default ListFindingAggregatorsIterable listFindingAggregatorsPaginator(ListFindingAggregatorsRequest listFindingAggregatorsRequest)
                                                                throws InternalException,
                                                                       LimitExceededException,
                                                                       InvalidAccessException,
                                                                       AccessDeniedException,
                                                                       InvalidInputException,
                                                                       AwsServiceException,
                                                                       SdkClientException,
                                                                       SecurityHubException
```
    If finding aggregation is enabled, then ListFindingAggregators returns the ARN of the finding aggregator. You can run this operation from any Region.
    
    This is a variant of listFindingAggregators(software.amazon.awssdk.services.securityhub.model.ListFindingAggregatorsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListFindingAggregatorsIterable responses = client.listFindingAggregatorsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.ListFindingAggregatorsIterable responses = client
             .listFindingAggregatorsPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.ListFindingAggregatorsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListFindingAggregatorsIterable responses = client.listFindingAggregatorsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listFindingAggregators(software.amazon.awssdk.services.securityhub.model.ListFindingAggregatorsRequest) operation.
    Parameters:
    
    listFindingAggregatorsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listFindingAggregatorsPaginator
```
default ListFindingAggregatorsIterable listFindingAggregatorsPaginator(Consumer<ListFindingAggregatorsRequest.Builder> listFindingAggregatorsRequest)
                                                                throws InternalException,
                                                                       LimitExceededException,
                                                                       InvalidAccessException,
                                                                       AccessDeniedException,
                                                                       InvalidInputException,
                                                                       AwsServiceException,
                                                                       SdkClientException,
                                                                       SecurityHubException
```
    If finding aggregation is enabled, then ListFindingAggregators returns the ARN of the finding aggregator. You can run this operation from any Region.
    
    This is a variant of listFindingAggregators(software.amazon.awssdk.services.securityhub.model.ListFindingAggregatorsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListFindingAggregatorsIterable responses = client.listFindingAggregatorsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.ListFindingAggregatorsIterable responses = client
             .listFindingAggregatorsPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.ListFindingAggregatorsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListFindingAggregatorsIterable responses = client.listFindingAggregatorsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listFindingAggregators(software.amazon.awssdk.services.securityhub.model.ListFindingAggregatorsRequest) operation.
    
    This is a convenience which creates an instance of the ListFindingAggregatorsRequest.Builder avoiding the need to create one manually via ListFindingAggregatorsRequest.builder()
    Parameters:
    
    listFindingAggregatorsRequest - A Consumer that will call methods on ListFindingAggregatorsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listInvitations
```
default ListInvitationsResponse listInvitations(ListInvitationsRequest listInvitationsRequest)
                                         throws InternalException,
                                                InvalidInputException,
                                                InvalidAccessException,
                                                LimitExceededException,
                                                AwsServiceException,
                                                SdkClientException,
                                                SecurityHubException
```
    Lists all Security Hub membership invitations that were sent to the current Amazon Web Services account.
    
    This operation is only used by accounts that are managed by invitation. Accounts that are managed using the integration with Organizations do not receive invitations.
    
    Parameters:
    
    listInvitationsRequest -
    
    Returns:
    
    Result of the ListInvitations operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listInvitations
```
default ListInvitationsResponse listInvitations(Consumer<ListInvitationsRequest.Builder> listInvitationsRequest)
                                         throws InternalException,
                                                InvalidInputException,
                                                InvalidAccessException,
                                                LimitExceededException,
                                                AwsServiceException,
                                                SdkClientException,
                                                SecurityHubException
```
    Lists all Security Hub membership invitations that were sent to the current Amazon Web Services account.
    
    This operation is only used by accounts that are managed by invitation. Accounts that are managed using the integration with Organizations do not receive invitations.
    
    This is a convenience which creates an instance of the ListInvitationsRequest.Builder avoiding the need to create one manually via ListInvitationsRequest.builder()
    
    Parameters:
    
    listInvitationsRequest - A Consumer that will call methods on ListInvitationsRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListInvitations operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listInvitations
```
default ListInvitationsResponse listInvitations()
                                         throws InternalException,
                                                InvalidInputException,
                                                InvalidAccessException,
                                                LimitExceededException,
                                                AwsServiceException,
                                                SdkClientException,
                                                SecurityHubException
```
    Lists all Security Hub membership invitations that were sent to the current Amazon Web Services account.
    
    This operation is only used by accounts that are managed by invitation. Accounts that are managed using the integration with Organizations do not receive invitations.
    
    Returns:
    
    Result of the ListInvitations operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    listInvitations(ListInvitationsRequest), AWS API Documentation
  - listInvitationsPaginator
```
default ListInvitationsIterable listInvitationsPaginator()
                                                  throws InternalException,
                                                         InvalidInputException,
                                                         InvalidAccessException,
                                                         LimitExceededException,
                                                         AwsServiceException,
                                                         SdkClientException,
                                                         SecurityHubException
```
    Lists all Security Hub membership invitations that were sent to the current Amazon Web Services account.
    
    This operation is only used by accounts that are managed by invitation. Accounts that are managed using the integration with Organizations do not receive invitations.
    
    This is a variant of listInvitations(software.amazon.awssdk.services.securityhub.model.ListInvitationsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListInvitationsIterable responses = client.listInvitationsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.ListInvitationsIterable responses = client
             .listInvitationsPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.ListInvitationsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListInvitationsIterable responses = client.listInvitationsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listInvitations(software.amazon.awssdk.services.securityhub.model.ListInvitationsRequest) operation.
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    listInvitationsPaginator(ListInvitationsRequest), AWS API Documentation
  - listInvitationsPaginator
```
default ListInvitationsIterable listInvitationsPaginator(ListInvitationsRequest listInvitationsRequest)
                                                  throws InternalException,
                                                         InvalidInputException,
                                                         InvalidAccessException,
                                                         LimitExceededException,
                                                         AwsServiceException,
                                                         SdkClientException,
                                                         SecurityHubException
```
    Lists all Security Hub membership invitations that were sent to the current Amazon Web Services account.
    
    This operation is only used by accounts that are managed by invitation. Accounts that are managed using the integration with Organizations do not receive invitations.
    
    This is a variant of listInvitations(software.amazon.awssdk.services.securityhub.model.ListInvitationsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListInvitationsIterable responses = client.listInvitationsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.ListInvitationsIterable responses = client
             .listInvitationsPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.ListInvitationsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListInvitationsIterable responses = client.listInvitationsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listInvitations(software.amazon.awssdk.services.securityhub.model.ListInvitationsRequest) operation.
    Parameters:
    
    listInvitationsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listInvitationsPaginator
```
default ListInvitationsIterable listInvitationsPaginator(Consumer<ListInvitationsRequest.Builder> listInvitationsRequest)
                                                  throws InternalException,
                                                         InvalidInputException,
                                                         InvalidAccessException,
                                                         LimitExceededException,
                                                         AwsServiceException,
                                                         SdkClientException,
                                                         SecurityHubException
```
    Lists all Security Hub membership invitations that were sent to the current Amazon Web Services account.
    
    This operation is only used by accounts that are managed by invitation. Accounts that are managed using the integration with Organizations do not receive invitations.
    
    This is a variant of listInvitations(software.amazon.awssdk.services.securityhub.model.ListInvitationsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListInvitationsIterable responses = client.listInvitationsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.ListInvitationsIterable responses = client
             .listInvitationsPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.ListInvitationsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListInvitationsIterable responses = client.listInvitationsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listInvitations(software.amazon.awssdk.services.securityhub.model.ListInvitationsRequest) operation.
    
    This is a convenience which creates an instance of the ListInvitationsRequest.Builder avoiding the need to create one manually via ListInvitationsRequest.builder()
    Parameters:
    
    listInvitationsRequest - A Consumer that will call methods on ListInvitationsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listMembers
```
default ListMembersResponse listMembers(ListMembersRequest listMembersRequest)
                                 throws InternalException,
                                        InvalidInputException,
                                        InvalidAccessException,
                                        LimitExceededException,
                                        AwsServiceException,
                                        SdkClientException,
                                        SecurityHubException
```
    Lists details about all member accounts for the current Security Hub administrator account.
    
    The results include both member accounts that belong to an organization and member accounts that were invited manually.
    
    Parameters:
    
    listMembersRequest -
    
    Returns:
    
    Result of the ListMembers operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listMembers
```
default ListMembersResponse listMembers(Consumer<ListMembersRequest.Builder> listMembersRequest)
                                 throws InternalException,
                                        InvalidInputException,
                                        InvalidAccessException,
                                        LimitExceededException,
                                        AwsServiceException,
                                        SdkClientException,
                                        SecurityHubException
```
    Lists details about all member accounts for the current Security Hub administrator account.
    
    The results include both member accounts that belong to an organization and member accounts that were invited manually.
    
    This is a convenience which creates an instance of the ListMembersRequest.Builder avoiding the need to create one manually via ListMembersRequest.builder()
    
    Parameters:
    
    listMembersRequest - A Consumer that will call methods on ListMembersRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListMembers operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listMembers
```
default ListMembersResponse listMembers()
                                 throws InternalException,
                                        InvalidInputException,
                                        InvalidAccessException,
                                        LimitExceededException,
                                        AwsServiceException,
                                        SdkClientException,
                                        SecurityHubException
```
    Lists details about all member accounts for the current Security Hub administrator account.
    
    The results include both member accounts that belong to an organization and member accounts that were invited manually.
    
    Returns:
    
    Result of the ListMembers operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    listMembers(ListMembersRequest), AWS API Documentation
  - listMembersPaginator
```
default ListMembersIterable listMembersPaginator()
                                          throws InternalException,
                                                 InvalidInputException,
                                                 InvalidAccessException,
                                                 LimitExceededException,
                                                 AwsServiceException,
                                                 SdkClientException,
                                                 SecurityHubException
```
    Lists details about all member accounts for the current Security Hub administrator account.
    
    The results include both member accounts that belong to an organization and member accounts that were invited manually.
    
    This is a variant of listMembers(software.amazon.awssdk.services.securityhub.model.ListMembersRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListMembersIterable responses = client.listMembersPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.ListMembersIterable responses = client.listMembersPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.ListMembersResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListMembersIterable responses = client.listMembersPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listMembers(software.amazon.awssdk.services.securityhub.model.ListMembersRequest) operation.
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    listMembersPaginator(ListMembersRequest), AWS API Documentation
  - listMembersPaginator
```
default ListMembersIterable listMembersPaginator(ListMembersRequest listMembersRequest)
                                          throws InternalException,
                                                 InvalidInputException,
                                                 InvalidAccessException,
                                                 LimitExceededException,
                                                 AwsServiceException,
                                                 SdkClientException,
                                                 SecurityHubException
```
    Lists details about all member accounts for the current Security Hub administrator account.
    
    The results include both member accounts that belong to an organization and member accounts that were invited manually.
    
    This is a variant of listMembers(software.amazon.awssdk.services.securityhub.model.ListMembersRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListMembersIterable responses = client.listMembersPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.ListMembersIterable responses = client.listMembersPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.ListMembersResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListMembersIterable responses = client.listMembersPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listMembers(software.amazon.awssdk.services.securityhub.model.ListMembersRequest) operation.
    Parameters:
    
    listMembersRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listMembersPaginator
```
default ListMembersIterable listMembersPaginator(Consumer<ListMembersRequest.Builder> listMembersRequest)
                                          throws InternalException,
                                                 InvalidInputException,
                                                 InvalidAccessException,
                                                 LimitExceededException,
                                                 AwsServiceException,
                                                 SdkClientException,
                                                 SecurityHubException
```
    Lists details about all member accounts for the current Security Hub administrator account.
    
    The results include both member accounts that belong to an organization and member accounts that were invited manually.
    
    This is a variant of listMembers(software.amazon.awssdk.services.securityhub.model.ListMembersRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListMembersIterable responses = client.listMembersPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.ListMembersIterable responses = client.listMembersPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.ListMembersResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListMembersIterable responses = client.listMembersPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listMembers(software.amazon.awssdk.services.securityhub.model.ListMembersRequest) operation.
    
    This is a convenience which creates an instance of the ListMembersRequest.Builder avoiding the need to create one manually via ListMembersRequest.builder()
    Parameters:
    
    listMembersRequest - A Consumer that will call methods on ListMembersRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listOrganizationAdminAccounts
```
default ListOrganizationAdminAccountsResponse listOrganizationAdminAccounts(ListOrganizationAdminAccountsRequest listOrganizationAdminAccountsRequest)
                                                                     throws InternalException,
                                                                            InvalidInputException,
                                                                            InvalidAccessException,
                                                                            LimitExceededException,
                                                                            AwsServiceException,
                                                                            SdkClientException,
                                                                            SecurityHubException
```
    Lists the Security Hub administrator accounts. Can only be called by the organization management account.
    
    Parameters:
    
    listOrganizationAdminAccountsRequest -
    
    Returns:
    
    Result of the ListOrganizationAdminAccounts operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listOrganizationAdminAccounts
```
default ListOrganizationAdminAccountsResponse listOrganizationAdminAccounts(Consumer<ListOrganizationAdminAccountsRequest.Builder> listOrganizationAdminAccountsRequest)
                                                                     throws InternalException,
                                                                            InvalidInputException,
                                                                            InvalidAccessException,
                                                                            LimitExceededException,
                                                                            AwsServiceException,
                                                                            SdkClientException,
                                                                            SecurityHubException
```
    Lists the Security Hub administrator accounts. Can only be called by the organization management account.
    
    This is a convenience which creates an instance of the ListOrganizationAdminAccountsRequest.Builder avoiding the need to create one manually via ListOrganizationAdminAccountsRequest.builder()
    
    Parameters:
    
    listOrganizationAdminAccountsRequest - A Consumer that will call methods on ListOrganizationAdminAccountsRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListOrganizationAdminAccounts operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listOrganizationAdminAccountsPaginator
```
default ListOrganizationAdminAccountsIterable listOrganizationAdminAccountsPaginator(ListOrganizationAdminAccountsRequest listOrganizationAdminAccountsRequest)
                                                                              throws InternalException,
                                                                                     InvalidInputException,
                                                                                     InvalidAccessException,
                                                                                     LimitExceededException,
                                                                                     AwsServiceException,
                                                                                     SdkClientException,
                                                                                     SecurityHubException
```
    Lists the Security Hub administrator accounts. Can only be called by the organization management account.
    
    This is a variant of listOrganizationAdminAccounts(software.amazon.awssdk.services.securityhub.model.ListOrganizationAdminAccountsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListOrganizationAdminAccountsIterable responses = client.listOrganizationAdminAccountsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.ListOrganizationAdminAccountsIterable responses = client
             .listOrganizationAdminAccountsPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.ListOrganizationAdminAccountsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListOrganizationAdminAccountsIterable responses = client.listOrganizationAdminAccountsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listOrganizationAdminAccounts(software.amazon.awssdk.services.securityhub.model.ListOrganizationAdminAccountsRequest) operation.
    Parameters:
    
    listOrganizationAdminAccountsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listOrganizationAdminAccountsPaginator
```
default ListOrganizationAdminAccountsIterable listOrganizationAdminAccountsPaginator(Consumer<ListOrganizationAdminAccountsRequest.Builder> listOrganizationAdminAccountsRequest)
                                                                              throws InternalException,
                                                                                     InvalidInputException,
                                                                                     InvalidAccessException,
                                                                                     LimitExceededException,
                                                                                     AwsServiceException,
                                                                                     SdkClientException,
                                                                                     SecurityHubException
```
    Lists the Security Hub administrator accounts. Can only be called by the organization management account.
    
    This is a variant of listOrganizationAdminAccounts(software.amazon.awssdk.services.securityhub.model.ListOrganizationAdminAccountsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListOrganizationAdminAccountsIterable responses = client.listOrganizationAdminAccountsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.ListOrganizationAdminAccountsIterable responses = client
             .listOrganizationAdminAccountsPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.ListOrganizationAdminAccountsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListOrganizationAdminAccountsIterable responses = client.listOrganizationAdminAccountsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listOrganizationAdminAccounts(software.amazon.awssdk.services.securityhub.model.ListOrganizationAdminAccountsRequest) operation.
    
    This is a convenience which creates an instance of the ListOrganizationAdminAccountsRequest.Builder avoiding the need to create one manually via ListOrganizationAdminAccountsRequest.builder()
    Parameters:
    
    listOrganizationAdminAccountsRequest - A Consumer that will call methods on ListOrganizationAdminAccountsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listSecurityControlDefinitions
```
default ListSecurityControlDefinitionsResponse listSecurityControlDefinitions(ListSecurityControlDefinitionsRequest listSecurityControlDefinitionsRequest)
                                                                       throws InternalException,
                                                                              InvalidInputException,
                                                                              InvalidAccessException,
                                                                              LimitExceededException,
                                                                              AwsServiceException,
                                                                              SdkClientException,
                                                                              SecurityHubException
```
    Lists all of the security controls that apply to a specified standard.
    
    Parameters:
    
    listSecurityControlDefinitionsRequest -
    
    Returns:
    
    Result of the ListSecurityControlDefinitions operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listSecurityControlDefinitions
```
default ListSecurityControlDefinitionsResponse listSecurityControlDefinitions(Consumer<ListSecurityControlDefinitionsRequest.Builder> listSecurityControlDefinitionsRequest)
                                                                       throws InternalException,
                                                                              InvalidInputException,
                                                                              InvalidAccessException,
                                                                              LimitExceededException,
                                                                              AwsServiceException,
                                                                              SdkClientException,
                                                                              SecurityHubException
```
    Lists all of the security controls that apply to a specified standard.
    
    This is a convenience which creates an instance of the ListSecurityControlDefinitionsRequest.Builder avoiding the need to create one manually via ListSecurityControlDefinitionsRequest.builder()
    
    Parameters:
    
    listSecurityControlDefinitionsRequest - A Consumer that will call methods on ListSecurityControlDefinitionsRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListSecurityControlDefinitions operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listSecurityControlDefinitionsPaginator
```
default ListSecurityControlDefinitionsIterable listSecurityControlDefinitionsPaginator(ListSecurityControlDefinitionsRequest listSecurityControlDefinitionsRequest)
                                                                                throws InternalException,
                                                                                       InvalidInputException,
                                                                                       InvalidAccessException,
                                                                                       LimitExceededException,
                                                                                       AwsServiceException,
                                                                                       SdkClientException,
                                                                                       SecurityHubException
```
    Lists all of the security controls that apply to a specified standard.
    
    This is a variant of listSecurityControlDefinitions(software.amazon.awssdk.services.securityhub.model.ListSecurityControlDefinitionsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListSecurityControlDefinitionsIterable responses = client.listSecurityControlDefinitionsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.ListSecurityControlDefinitionsIterable responses = client
             .listSecurityControlDefinitionsPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.ListSecurityControlDefinitionsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListSecurityControlDefinitionsIterable responses = client.listSecurityControlDefinitionsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listSecurityControlDefinitions(software.amazon.awssdk.services.securityhub.model.ListSecurityControlDefinitionsRequest) operation.
    Parameters:
    
    listSecurityControlDefinitionsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listSecurityControlDefinitionsPaginator
```
default ListSecurityControlDefinitionsIterable listSecurityControlDefinitionsPaginator(Consumer<ListSecurityControlDefinitionsRequest.Builder> listSecurityControlDefinitionsRequest)
                                                                                throws InternalException,
                                                                                       InvalidInputException,
                                                                                       InvalidAccessException,
                                                                                       LimitExceededException,
                                                                                       AwsServiceException,
                                                                                       SdkClientException,
                                                                                       SecurityHubException
```
    Lists all of the security controls that apply to a specified standard.
    
    This is a variant of listSecurityControlDefinitions(software.amazon.awssdk.services.securityhub.model.ListSecurityControlDefinitionsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListSecurityControlDefinitionsIterable responses = client.listSecurityControlDefinitionsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.ListSecurityControlDefinitionsIterable responses = client
             .listSecurityControlDefinitionsPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.ListSecurityControlDefinitionsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListSecurityControlDefinitionsIterable responses = client.listSecurityControlDefinitionsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listSecurityControlDefinitions(software.amazon.awssdk.services.securityhub.model.ListSecurityControlDefinitionsRequest) operation.
    
    This is a convenience which creates an instance of the ListSecurityControlDefinitionsRequest.Builder avoiding the need to create one manually via ListSecurityControlDefinitionsRequest.builder()
    Parameters:
    
    listSecurityControlDefinitionsRequest - A Consumer that will call methods on ListSecurityControlDefinitionsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listStandardsControlAssociations
```
default ListStandardsControlAssociationsResponse listStandardsControlAssociations(ListStandardsControlAssociationsRequest listStandardsControlAssociationsRequest)
                                                                           throws InternalException,
                                                                                  LimitExceededException,
                                                                                  InvalidAccessException,
                                                                                  InvalidInputException,
                                                                                  AwsServiceException,
                                                                                  SdkClientException,
                                                                                  SecurityHubException
```
    Specifies whether a control is currently enabled or disabled in each enabled standard in the calling account.
    
    Parameters:
    
    listStandardsControlAssociationsRequest -
    
    Returns:
    
    Result of the ListStandardsControlAssociations operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listStandardsControlAssociations
```
default ListStandardsControlAssociationsResponse listStandardsControlAssociations(Consumer<ListStandardsControlAssociationsRequest.Builder> listStandardsControlAssociationsRequest)
                                                                           throws InternalException,
                                                                                  LimitExceededException,
                                                                                  InvalidAccessException,
                                                                                  InvalidInputException,
                                                                                  AwsServiceException,
                                                                                  SdkClientException,
                                                                                  SecurityHubException
```
    Specifies whether a control is currently enabled or disabled in each enabled standard in the calling account.
    
    This is a convenience which creates an instance of the ListStandardsControlAssociationsRequest.Builder avoiding the need to create one manually via ListStandardsControlAssociationsRequest.builder()
    
    Parameters:
    
    listStandardsControlAssociationsRequest - A Consumer that will call methods on ListStandardsControlAssociationsRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListStandardsControlAssociations operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listStandardsControlAssociationsPaginator
```
default ListStandardsControlAssociationsIterable listStandardsControlAssociationsPaginator(ListStandardsControlAssociationsRequest listStandardsControlAssociationsRequest)
                                                                                    throws InternalException,
                                                                                           LimitExceededException,
                                                                                           InvalidAccessException,
                                                                                           InvalidInputException,
                                                                                           AwsServiceException,
                                                                                           SdkClientException,
                                                                                           SecurityHubException
```
    Specifies whether a control is currently enabled or disabled in each enabled standard in the calling account.
    
    This is a variant of listStandardsControlAssociations(software.amazon.awssdk.services.securityhub.model.ListStandardsControlAssociationsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListStandardsControlAssociationsIterable responses = client.listStandardsControlAssociationsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.ListStandardsControlAssociationsIterable responses = client
             .listStandardsControlAssociationsPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.ListStandardsControlAssociationsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListStandardsControlAssociationsIterable responses = client.listStandardsControlAssociationsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listStandardsControlAssociations(software.amazon.awssdk.services.securityhub.model.ListStandardsControlAssociationsRequest) operation.
    Parameters:
    
    listStandardsControlAssociationsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listStandardsControlAssociationsPaginator
```
default ListStandardsControlAssociationsIterable listStandardsControlAssociationsPaginator(Consumer<ListStandardsControlAssociationsRequest.Builder> listStandardsControlAssociationsRequest)
                                                                                    throws InternalException,
                                                                                           LimitExceededException,
                                                                                           InvalidAccessException,
                                                                                           InvalidInputException,
                                                                                           AwsServiceException,
                                                                                           SdkClientException,
                                                                                           SecurityHubException
```
    Specifies whether a control is currently enabled or disabled in each enabled standard in the calling account.
    
    This is a variant of listStandardsControlAssociations(software.amazon.awssdk.services.securityhub.model.ListStandardsControlAssociationsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListStandardsControlAssociationsIterable responses = client.listStandardsControlAssociationsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.securityhub.paginators.ListStandardsControlAssociationsIterable responses = client
             .listStandardsControlAssociationsPaginator(request);
     for (software.amazon.awssdk.services.securityhub.model.ListStandardsControlAssociationsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.securityhub.paginators.ListStandardsControlAssociationsIterable responses = client.listStandardsControlAssociationsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listStandardsControlAssociations(software.amazon.awssdk.services.securityhub.model.ListStandardsControlAssociationsRequest) operation.
    
    This is a convenience which creates an instance of the ListStandardsControlAssociationsRequest.Builder avoiding the need to create one manually via ListStandardsControlAssociationsRequest.builder()
    Parameters:
    
    listStandardsControlAssociationsRequest - A Consumer that will call methods on ListStandardsControlAssociationsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTagsForResource
```
default ListTagsForResourceResponse listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)
                                                 throws InternalException,
                                                        InvalidInputException,
                                                        ResourceNotFoundException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        SecurityHubException
```
    Returns a list of tags associated with a resource.
    
    Parameters:
    
    listTagsForResourceRequest -
    
    Returns:
    
    Result of the ListTagsForResource operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTagsForResource
```
default ListTagsForResourceResponse listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)
                                                 throws InternalException,
                                                        InvalidInputException,
                                                        ResourceNotFoundException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        SecurityHubException
```
    Returns a list of tags associated with a resource.
    
    This is a convenience which creates an instance of the ListTagsForResourceRequest.Builder avoiding the need to create one manually via ListTagsForResourceRequest.builder()
    
    Parameters:
    
    listTagsForResourceRequest - A Consumer that will call methods on ListTagsForResourceRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListTagsForResource operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - tagResource
```
default TagResourceResponse tagResource(TagResourceRequest tagResourceRequest)
                                 throws InternalException,
                                        InvalidInputException,
                                        ResourceNotFoundException,
                                        AwsServiceException,
                                        SdkClientException,
                                        SecurityHubException
```
    Adds one or more tags to a resource.
    
    Parameters:
    
    tagResourceRequest -
    
    Returns:
    
    Result of the TagResource operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - tagResource
```
default TagResourceResponse tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)
                                 throws InternalException,
                                        InvalidInputException,
                                        ResourceNotFoundException,
                                        AwsServiceException,
                                        SdkClientException,
                                        SecurityHubException
```
    Adds one or more tags to a resource.
    
    This is a convenience which creates an instance of the TagResourceRequest.Builder avoiding the need to create one manually via TagResourceRequest.builder()
    
    Parameters:
    
    tagResourceRequest - A Consumer that will call methods on TagResourceRequest.Builder to create a request.
    
    Returns:
    
    Result of the TagResource operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - untagResource
```
default UntagResourceResponse untagResource(UntagResourceRequest untagResourceRequest)
                                     throws InternalException,
                                            InvalidInputException,
                                            ResourceNotFoundException,
                                            AwsServiceException,
                                            SdkClientException,
                                            SecurityHubException
```
    Removes one or more tags from a resource.
    
    Parameters:
    
    untagResourceRequest -
    
    Returns:
    
    Result of the UntagResource operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - untagResource
```
default UntagResourceResponse untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)
                                     throws InternalException,
                                            InvalidInputException,
                                            ResourceNotFoundException,
                                            AwsServiceException,
                                            SdkClientException,
                                            SecurityHubException
```
    Removes one or more tags from a resource.
    
    This is a convenience which creates an instance of the UntagResourceRequest.Builder avoiding the need to create one manually via UntagResourceRequest.builder()
    
    Parameters:
    
    untagResourceRequest - A Consumer that will call methods on UntagResourceRequest.Builder to create a request.
    
    Returns:
    
    Result of the UntagResource operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateActionTarget
```
default UpdateActionTargetResponse updateActionTarget(UpdateActionTargetRequest updateActionTargetRequest)
                                               throws InternalException,
                                                      InvalidInputException,
                                                      ResourceNotFoundException,
                                                      InvalidAccessException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      SecurityHubException
```
    Updates the name and description of a custom action target in Security Hub.
    
    Parameters:
    
    updateActionTargetRequest -
    
    Returns:
    
    Result of the UpdateActionTarget operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateActionTarget
```
default UpdateActionTargetResponse updateActionTarget(Consumer<UpdateActionTargetRequest.Builder> updateActionTargetRequest)
                                               throws InternalException,
                                                      InvalidInputException,
                                                      ResourceNotFoundException,
                                                      InvalidAccessException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      SecurityHubException
```
    Updates the name and description of a custom action target in Security Hub.
    
    This is a convenience which creates an instance of the UpdateActionTargetRequest.Builder avoiding the need to create one manually via UpdateActionTargetRequest.builder()
    
    Parameters:
    
    updateActionTargetRequest - A Consumer that will call methods on UpdateActionTargetRequest.Builder to create a request.
    
    Returns:
    
    Result of the UpdateActionTarget operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateFindingAggregator
```
default UpdateFindingAggregatorResponse updateFindingAggregator(UpdateFindingAggregatorRequest updateFindingAggregatorRequest)
                                                         throws InternalException,
                                                                LimitExceededException,
                                                                InvalidAccessException,
                                                                AccessDeniedException,
                                                                InvalidInputException,
                                                                ResourceNotFoundException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                SecurityHubException
```
    Updates the finding aggregation configuration. Used to update the Region linking mode and the list of included or excluded Regions. You cannot use UpdateFindingAggregator to change the aggregation Region.
    
    You must run UpdateFindingAggregator from the current aggregation Region.
    
    Parameters:
    
    updateFindingAggregatorRequest -
    
    Returns:
    
    Result of the UpdateFindingAggregator operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateFindingAggregator
```
default UpdateFindingAggregatorResponse updateFindingAggregator(Consumer<UpdateFindingAggregatorRequest.Builder> updateFindingAggregatorRequest)
                                                         throws InternalException,
                                                                LimitExceededException,
                                                                InvalidAccessException,
                                                                AccessDeniedException,
                                                                InvalidInputException,
                                                                ResourceNotFoundException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                SecurityHubException
```
    Updates the finding aggregation configuration. Used to update the Region linking mode and the list of included or excluded Regions. You cannot use UpdateFindingAggregator to change the aggregation Region.
    
    You must run UpdateFindingAggregator from the current aggregation Region.
    
    This is a convenience which creates an instance of the UpdateFindingAggregatorRequest.Builder avoiding the need to create one manually via UpdateFindingAggregatorRequest.builder()
    
    Parameters:
    
    updateFindingAggregatorRequest - A Consumer that will call methods on UpdateFindingAggregatorRequest.Builder to create a request.
    
    Returns:
    
    Result of the UpdateFindingAggregator operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    AccessDeniedException - You don't have permission to perform the action specified in the request.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateFindings
```
default UpdateFindingsResponse updateFindings(UpdateFindingsRequest updateFindingsRequest)
                                       throws InternalException,
                                              InvalidInputException,
                                              LimitExceededException,
                                              InvalidAccessException,
                                              ResourceNotFoundException,
                                              AwsServiceException,
                                              SdkClientException,
                                              SecurityHubException
```
    UpdateFindings is deprecated. Instead of UpdateFindings, use BatchUpdateFindings.
    
    Updates the Note and RecordState of the Security Hub-aggregated findings that the filter attributes specify. Any member account that can view the finding also sees the update to the finding.
    
    Parameters:
    
    updateFindingsRequest -
    
    Returns:
    
    Result of the UpdateFindings operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateFindings
```
default UpdateFindingsResponse updateFindings(Consumer<UpdateFindingsRequest.Builder> updateFindingsRequest)
                                       throws InternalException,
                                              InvalidInputException,
                                              LimitExceededException,
                                              InvalidAccessException,
                                              ResourceNotFoundException,
                                              AwsServiceException,
                                              SdkClientException,
                                              SecurityHubException
```
    UpdateFindings is deprecated. Instead of UpdateFindings, use BatchUpdateFindings.
    
    Updates the Note and RecordState of the Security Hub-aggregated findings that the filter attributes specify. Any member account that can view the finding also sees the update to the finding.
    
    This is a convenience which creates an instance of the UpdateFindingsRequest.Builder avoiding the need to create one manually via UpdateFindingsRequest.builder()
    
    Parameters:
    
    updateFindingsRequest - A Consumer that will call methods on UpdateFindingsRequest.Builder to create a request.
    
    Returns:
    
    Result of the UpdateFindings operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateInsight
```
default UpdateInsightResponse updateInsight(UpdateInsightRequest updateInsightRequest)
                                     throws InternalException,
                                            InvalidInputException,
                                            InvalidAccessException,
                                            LimitExceededException,
                                            ResourceNotFoundException,
                                            AwsServiceException,
                                            SdkClientException,
                                            SecurityHubException
```
    Updates the Security Hub insight identified by the specified insight ARN.
    
    Parameters:
    
    updateInsightRequest -
    
    Returns:
    
    Result of the UpdateInsight operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateInsight
```
default UpdateInsightResponse updateInsight(Consumer<UpdateInsightRequest.Builder> updateInsightRequest)
                                     throws InternalException,
                                            InvalidInputException,
                                            InvalidAccessException,
                                            LimitExceededException,
                                            ResourceNotFoundException,
                                            AwsServiceException,
                                            SdkClientException,
                                            SecurityHubException
```
    Updates the Security Hub insight identified by the specified insight ARN.
    
    This is a convenience which creates an instance of the UpdateInsightRequest.Builder avoiding the need to create one manually via UpdateInsightRequest.builder()
    
    Parameters:
    
    updateInsightRequest - A Consumer that will call methods on UpdateInsightRequest.Builder to create a request.
    
    Returns:
    
    Result of the UpdateInsight operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateOrganizationConfiguration
```
default UpdateOrganizationConfigurationResponse updateOrganizationConfiguration(UpdateOrganizationConfigurationRequest updateOrganizationConfigurationRequest)
                                                                         throws InternalException,
                                                                                InvalidInputException,
                                                                                InvalidAccessException,
                                                                                LimitExceededException,
                                                                                AwsServiceException,
                                                                                SdkClientException,
                                                                                SecurityHubException
```
    Used to update the configuration related to Organizations. Can only be called from a Security Hub administrator account.
    
    Parameters:
    
    updateOrganizationConfigurationRequest -
    
    Returns:
    
    Result of the UpdateOrganizationConfiguration operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateOrganizationConfiguration
```
default UpdateOrganizationConfigurationResponse updateOrganizationConfiguration(Consumer<UpdateOrganizationConfigurationRequest.Builder> updateOrganizationConfigurationRequest)
                                                                         throws InternalException,
                                                                                InvalidInputException,
                                                                                InvalidAccessException,
                                                                                LimitExceededException,
                                                                                AwsServiceException,
                                                                                SdkClientException,
                                                                                SecurityHubException
```
    Used to update the configuration related to Organizations. Can only be called from a Security Hub administrator account.
    
    This is a convenience which creates an instance of the UpdateOrganizationConfigurationRequest.Builder avoiding the need to create one manually via UpdateOrganizationConfigurationRequest.builder()
    
    Parameters:
    
    updateOrganizationConfigurationRequest - A Consumer that will call methods on UpdateOrganizationConfigurationRequest.Builder to create a request.
    
    Returns:
    
    Result of the UpdateOrganizationConfiguration operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateSecurityHubConfiguration
```
default UpdateSecurityHubConfigurationResponse updateSecurityHubConfiguration(UpdateSecurityHubConfigurationRequest updateSecurityHubConfigurationRequest)
                                                                       throws InternalException,
                                                                              InvalidInputException,
                                                                              InvalidAccessException,
                                                                              LimitExceededException,
                                                                              ResourceNotFoundException,
                                                                              AwsServiceException,
                                                                              SdkClientException,
                                                                              SecurityHubException
```
    Updates configuration options for Security Hub.
    
    Parameters:
    
    updateSecurityHubConfigurationRequest -
    
    Returns:
    
    Result of the UpdateSecurityHubConfiguration operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateSecurityHubConfiguration
```
default UpdateSecurityHubConfigurationResponse updateSecurityHubConfiguration(Consumer<UpdateSecurityHubConfigurationRequest.Builder> updateSecurityHubConfigurationRequest)
                                                                       throws InternalException,
                                                                              InvalidInputException,
                                                                              InvalidAccessException,
                                                                              LimitExceededException,
                                                                              ResourceNotFoundException,
                                                                              AwsServiceException,
                                                                              SdkClientException,
                                                                              SecurityHubException
```
    Updates configuration options for Security Hub.
    
    This is a convenience which creates an instance of the UpdateSecurityHubConfigurationRequest.Builder avoiding the need to create one manually via UpdateSecurityHubConfigurationRequest.builder()
    
    Parameters:
    
    updateSecurityHubConfigurationRequest - A Consumer that will call methods on UpdateSecurityHubConfigurationRequest.Builder to create a request.
    
    Returns:
    
    Result of the UpdateSecurityHubConfiguration operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    LimitExceededException - The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateStandardsControl
```
default UpdateStandardsControlResponse updateStandardsControl(UpdateStandardsControlRequest updateStandardsControlRequest)
                                                       throws InternalException,
                                                              InvalidInputException,
                                                              InvalidAccessException,
                                                              ResourceNotFoundException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              SecurityHubException
```
    Used to control whether an individual security standard control is enabled or disabled.
    
    Parameters:
    
    updateStandardsControlRequest -
    
    Returns:
    
    Result of the UpdateStandardsControl operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateStandardsControl
```
default UpdateStandardsControlResponse updateStandardsControl(Consumer<UpdateStandardsControlRequest.Builder> updateStandardsControlRequest)
                                                       throws InternalException,
                                                              InvalidInputException,
                                                              InvalidAccessException,
                                                              ResourceNotFoundException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              SecurityHubException
```
    Used to control whether an individual security standard control is enabled or disabled.
    
    This is a convenience which creates an instance of the UpdateStandardsControlRequest.Builder avoiding the need to create one manually via UpdateStandardsControlRequest.builder()
    
    Parameters:
    
    updateStandardsControlRequest - A Consumer that will call methods on UpdateStandardsControlRequest.Builder to create a request.
    
    Returns:
    
    Result of the UpdateStandardsControl operation returned by the service.
    
    Throws:
    
    InternalException - Internal server error.
    
    InvalidInputException - The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
    
    InvalidAccessException - The account doesn't have permission to perform this action.
    
    ResourceNotFoundException - The request was rejected because we can't find the specified resource.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    SecurityHubException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - create
```
static SecurityHubClient create()
```
    Create a SecurityHubClient with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.
  - builder
```
static SecurityHubClientBuilder builder()
```
    Create a builder that can be used to configure and create a SecurityHubClient.
  - serviceMetadata
```
static ServiceMetadata serviceMetadata()
```
  - serviceClientConfiguration
```
default SecurityHubServiceClientConfiguration serviceClientConfiguration()
```
    Specified by:
    
    serviceClientConfiguration in interface AwsClient
    
    Specified by:
    
    serviceClientConfiguration in interface SdkClient

Interface SecurityHubClient

Field Summary

Method Summary

Methods inherited from interface software.amazon.awssdk.core.SdkClient

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable

Field Detail

SERVICE_NAME

SERVICE_METADATA_ID

Method Detail

acceptAdministratorInvitation

acceptAdministratorInvitation

acceptInvitation

acceptInvitation

batchDeleteAutomationRules

batchDeleteAutomationRules

batchDisableStandards

batchDisableStandards

batchEnableStandards

batchEnableStandards

batchGetAutomationRules

batchGetAutomationRules

batchGetSecurityControls

batchGetSecurityControls

batchGetStandardsControlAssociations

batchGetStandardsControlAssociations

batchImportFindings

batchImportFindings

batchUpdateAutomationRules

batchUpdateAutomationRules

batchUpdateFindings

batchUpdateFindings

batchUpdateStandardsControlAssociations

batchUpdateStandardsControlAssociations

createActionTarget

createActionTarget

createAutomationRule

createAutomationRule

createFindingAggregator

createFindingAggregator

createInsight

createInsight

createMembers

createMembers

declineInvitations

declineInvitations

deleteActionTarget

deleteActionTarget

deleteFindingAggregator

deleteFindingAggregator

deleteInsight

deleteInsight

deleteInvitations

deleteInvitations

deleteMembers

deleteMembers

describeActionTargets

describeActionTargets

describeActionTargetsPaginator

describeActionTargetsPaginator

describeHub

describeHub

describeOrganizationConfiguration

describeOrganizationConfiguration

describeProducts

describeProducts

describeProductsPaginator

describeProductsPaginator

describeStandards

describeStandards

describeStandardsPaginator

describeStandardsPaginator

describeStandardsControls

describeStandardsControls

describeStandardsControlsPaginator

describeStandardsControlsPaginator

disableImportFindingsForProduct

disableImportFindingsForProduct

disableOrganizationAdminAccount

disableOrganizationAdminAccount

disableSecurityHub