@Generated(value="com.amazonaws:aws-java-sdk-code-generator") public class AbstractAmazonCloudWatchEvents extends Object implements AmazonCloudWatchEvents
AmazonCloudWatchEvents. Convenient method forms pass through to the corresponding
overload that takes a request object, which throws an UnsupportedOperationException.ENDPOINT_PREFIX| Modifier | Constructor and Description |
|---|---|
protected |
AbstractAmazonCloudWatchEvents() |
| Modifier and Type | Method and Description |
|---|---|
ActivateEventSourceResult |
activateEventSource(ActivateEventSourceRequest request)
Activates a partner event source that has been deactivated.
|
CreateEventBusResult |
createEventBus(CreateEventBusRequest request)
Creates a new event bus within your account.
|
CreatePartnerEventSourceResult |
createPartnerEventSource(CreatePartnerEventSourceRequest request)
Called by an SaaS partner to create a partner event source.
|
DeactivateEventSourceResult |
deactivateEventSource(DeactivateEventSourceRequest request)
You can use this operation to temporarily stop receiving events from the specified partner event source.
|
DeleteEventBusResult |
deleteEventBus(DeleteEventBusRequest request)
Deletes the specified custom event bus or partner event bus.
|
DeletePartnerEventSourceResult |
deletePartnerEventSource(DeletePartnerEventSourceRequest request)
This operation is used by SaaS partners to delete a partner event source.
|
DeleteRuleResult |
deleteRule(DeleteRuleRequest request)
Deletes the specified rule.
|
DescribeEventBusResult |
describeEventBus(DescribeEventBusRequest request)
Displays details about an event bus in your account.
|
DescribeEventSourceResult |
describeEventSource(DescribeEventSourceRequest request)
This operation lists details about a partner event source that is shared with your account.
|
DescribePartnerEventSourceResult |
describePartnerEventSource(DescribePartnerEventSourceRequest request)
An SaaS partner can use this operation to list details about a partner event source that they have created.
|
DescribeRuleResult |
describeRule(DescribeRuleRequest request)
Describes the specified rule.
|
DisableRuleResult |
disableRule(DisableRuleRequest request)
Disables the specified rule.
|
EnableRuleResult |
enableRule(EnableRuleRequest request)
Enables the specified rule.
|
ResponseMetadata |
getCachedResponseMetadata(AmazonWebServiceRequest request)
Returns additional metadata for a previously executed successful request, typically used for debugging issues
where a service isn't acting as expected.
|
ListEventBusesResult |
listEventBuses(ListEventBusesRequest request)
Lists all the event buses in your account, including the default event bus, custom event buses, and partner event
buses.
|
ListEventSourcesResult |
listEventSources(ListEventSourcesRequest request)
You can use this to see all the partner event sources that have been shared with your AWS account.
|
ListPartnerEventSourceAccountsResult |
listPartnerEventSourceAccounts(ListPartnerEventSourceAccountsRequest request)
An SaaS partner can use this operation to display the AWS account ID that a particular partner event source name
is associated with.
|
ListPartnerEventSourcesResult |
listPartnerEventSources(ListPartnerEventSourcesRequest request)
An SaaS partner can use this operation to list all the partner event source names that they have created.
|
ListRuleNamesByTargetResult |
listRuleNamesByTarget(ListRuleNamesByTargetRequest request)
Lists the rules for the specified target.
|
ListRulesResult |
listRules(ListRulesRequest request)
Lists your Amazon EventBridge rules.
|
ListTagsForResourceResult |
listTagsForResource(ListTagsForResourceRequest request)
Displays the tags associated with an EventBridge resource.
|
ListTargetsByRuleResult |
listTargetsByRule(ListTargetsByRuleRequest request)
Lists the targets assigned to the specified rule.
|
PutEventsResult |
putEvents(PutEventsRequest request)
Sends custom events to Amazon EventBridge so that they can be matched to rules.
|
PutPartnerEventsResult |
putPartnerEvents(PutPartnerEventsRequest request)
This is used by SaaS partners to write events to a customer's partner event bus.
|
PutPermissionResult |
putPermission(PutPermissionRequest request)
Running
PutPermission permits the specified AWS account or AWS organization to put events to the
specified event bus. |
PutRuleResult |
putRule(PutRuleRequest request)
Creates or updates the specified rule.
|
PutTargetsResult |
putTargets(PutTargetsRequest request)
Adds the specified targets to the specified rule, or updates the targets if they are already associated with the
rule.
|
RemovePermissionResult |
removePermission(RemovePermissionRequest request)
Revokes the permission of another AWS account to be able to put events to the specified event bus.
|
RemoveTargetsResult |
removeTargets(RemoveTargetsRequest request)
Removes the specified targets from the specified rule.
|
void |
setEndpoint(String endpoint)
Overrides the default endpoint for this client ("events.us-east-1.amazonaws.com").
|
void |
setRegion(Region region)
An alternative to
AmazonCloudWatchEvents.setEndpoint(String), sets the regional endpoint for this
client's service calls. |
void |
shutdown()
Shuts down this client object, releasing any resources that might be held open.
|
TagResourceResult |
tagResource(TagResourceRequest request)
Assigns one or more tags (key-value pairs) to the specified EventBridge resource.
|
TestEventPatternResult |
testEventPattern(TestEventPatternRequest request)
Tests whether the specified event pattern matches the provided event.
|
UntagResourceResult |
untagResource(UntagResourceRequest request)
Removes one or more tags from the specified EventBridge resource.
|
public void setEndpoint(String endpoint)
AmazonCloudWatchEvents
Callers can pass in just the endpoint (ex: "events.us-east-1.amazonaws.com") or a full URL, including the
protocol (ex: "events.us-east-1.amazonaws.com"). If the protocol is not specified here, the default protocol from
this client's ClientConfiguration will be used, which by default is HTTPS.
For more information on using AWS regions with the AWS SDK for Java, and a complete list of all available endpoints for all AWS services, see: https://docs.aws.amazon.com/sdk-for-java/v1/developer-guide/java-dg-region-selection.html#region-selection- choose-endpoint
This method is not threadsafe. An endpoint should be configured when the client is created and before any service requests are made. Changing it afterwards creates inevitable race conditions for any service requests in transit or retrying.
setEndpoint in interface AmazonCloudWatchEventsendpoint - The endpoint (ex: "events.us-east-1.amazonaws.com") or a full URL, including the protocol (ex:
"events.us-east-1.amazonaws.com") of the region specific AWS endpoint this client will communicate with.public void setRegion(Region region)
AmazonCloudWatchEventsAmazonCloudWatchEvents.setEndpoint(String), sets the regional endpoint for this
client's service calls. Callers can use this method to control which AWS region they want to work with.
By default, all service endpoints in all regions use the https protocol. To use http instead, specify it in the
ClientConfiguration supplied at construction.
This method is not threadsafe. A region should be configured when the client is created and before any service requests are made. Changing it afterwards creates inevitable race conditions for any service requests in transit or retrying.
setRegion in interface AmazonCloudWatchEventsregion - The region this client will communicate with. See Region.getRegion(com.amazonaws.regions.Regions)
for accessing a given region. Must not be null and must be a region where the service is available.Region.getRegion(com.amazonaws.regions.Regions),
Region.createClient(Class, com.amazonaws.auth.AWSCredentialsProvider, ClientConfiguration),
Region.isServiceSupported(String)public ActivateEventSourceResult activateEventSource(ActivateEventSourceRequest request)
AmazonCloudWatchEventsActivates a partner event source that has been deactivated. Once activated, your matching event bus will start receiving events from the event source.
activateEventSource in interface AmazonCloudWatchEventspublic CreateEventBusResult createEventBus(CreateEventBusRequest request)
AmazonCloudWatchEventsCreates a new event bus within your account. This can be a custom event bus which you can use to receive events from your custom applications and services, or it can be a partner event bus which can be matched to a partner event source.
createEventBus in interface AmazonCloudWatchEventspublic CreatePartnerEventSourceResult createPartnerEventSource(CreatePartnerEventSourceRequest request)
AmazonCloudWatchEventsCalled by an SaaS partner to create a partner event source. This operation is not used by AWS customers.
Each partner event source can be used by one AWS account to create a matching partner event bus in that AWS account. A SaaS partner must create one partner event source for each AWS account that wants to receive those event types.
A partner event source creates events based on resources within the SaaS partner's service or application.
An AWS account that creates a partner event bus that matches the partner event source can use that event bus to receive events from the partner, and then process them using AWS Events rules and targets.
Partner event source names follow this format:
partner_name/event_namespace/event_name
partner_name is determined during partner registration and identifies the partner to AWS customers. event_namespace is determined by the partner and is a way for the partner to categorize their events. event_name is determined by the partner, and should uniquely identify an event-generating resource within the partner system. The combination of event_namespace and event_name should help AWS customers decide whether to create an event bus to receive these events.
createPartnerEventSource in interface AmazonCloudWatchEventspublic DeactivateEventSourceResult deactivateEventSource(DeactivateEventSourceRequest request)
AmazonCloudWatchEventsYou can use this operation to temporarily stop receiving events from the specified partner event source. The matching event bus is not deleted.
When you deactivate a partner event source, the source goes into PENDING state. If it remains in PENDING state for more than two weeks, it is deleted.
To activate a deactivated partner event source, use ActivateEventSource.
deactivateEventSource in interface AmazonCloudWatchEventspublic DeleteEventBusResult deleteEventBus(DeleteEventBusRequest request)
AmazonCloudWatchEventsDeletes the specified custom event bus or partner event bus. All rules associated with this event bus need to be deleted. You can't delete your account's default event bus.
deleteEventBus in interface AmazonCloudWatchEventspublic DeletePartnerEventSourceResult deletePartnerEventSource(DeletePartnerEventSourceRequest request)
AmazonCloudWatchEventsThis operation is used by SaaS partners to delete a partner event source. This operation is not used by AWS customers.
When you delete an event source, the status of the corresponding partner event bus in the AWS customer account becomes DELETED.
deletePartnerEventSource in interface AmazonCloudWatchEventspublic DeleteRuleResult deleteRule(DeleteRuleRequest request)
AmazonCloudWatchEventsDeletes the specified rule.
Before you can delete the rule, you must remove all targets, using RemoveTargets.
When you delete a rule, incoming events might continue to match to the deleted rule. Allow a short period of time for changes to take effect.
Managed rules are rules created and managed by another AWS service on your behalf. These rules are created by
those other AWS services to support functionality in those services. You can delete these rules using the
Force option, but you should do so only if you are sure the other service is not still using that
rule.
deleteRule in interface AmazonCloudWatchEventspublic DescribeEventBusResult describeEventBus(DescribeEventBusRequest request)
AmazonCloudWatchEventsDisplays details about an event bus in your account. This can include the external AWS accounts that are permitted to write events to your default event bus, and the associated policy. For custom event buses and partner event buses, it displays the name, ARN, policy, state, and creation time.
To enable your account to receive events from other accounts on its default event bus, use PutPermission.
For more information about partner event buses, see CreateEventBus.
describeEventBus in interface AmazonCloudWatchEventspublic DescribeEventSourceResult describeEventSource(DescribeEventSourceRequest request)
AmazonCloudWatchEventsThis operation lists details about a partner event source that is shared with your account.
describeEventSource in interface AmazonCloudWatchEventspublic DescribePartnerEventSourceResult describePartnerEventSource(DescribePartnerEventSourceRequest request)
AmazonCloudWatchEventsAn SaaS partner can use this operation to list details about a partner event source that they have created. AWS customers do not use this operation. Instead, AWS customers can use DescribeEventSource to see details about a partner event source that is shared with them.
describePartnerEventSource in interface AmazonCloudWatchEventspublic DescribeRuleResult describeRule(DescribeRuleRequest request)
AmazonCloudWatchEventsDescribes the specified rule.
DescribeRule does not list the targets of a rule. To see the targets associated with a rule, use ListTargetsByRule.
describeRule in interface AmazonCloudWatchEventspublic DisableRuleResult disableRule(DisableRuleRequest request)
AmazonCloudWatchEventsDisables the specified rule. A disabled rule won't match any events, and won't self-trigger if it has a schedule expression.
When you disable a rule, incoming events might continue to match to the disabled rule. Allow a short period of time for changes to take effect.
disableRule in interface AmazonCloudWatchEventspublic EnableRuleResult enableRule(EnableRuleRequest request)
AmazonCloudWatchEventsEnables the specified rule. If the rule does not exist, the operation fails.
When you enable a rule, incoming events might not immediately start matching to a newly enabled rule. Allow a short period of time for changes to take effect.
enableRule in interface AmazonCloudWatchEventspublic ListEventBusesResult listEventBuses(ListEventBusesRequest request)
AmazonCloudWatchEventsLists all the event buses in your account, including the default event bus, custom event buses, and partner event buses.
listEventBuses in interface AmazonCloudWatchEventspublic ListEventSourcesResult listEventSources(ListEventSourcesRequest request)
AmazonCloudWatchEventsYou can use this to see all the partner event sources that have been shared with your AWS account. For more information about partner event sources, see CreateEventBus.
listEventSources in interface AmazonCloudWatchEventspublic ListPartnerEventSourceAccountsResult listPartnerEventSourceAccounts(ListPartnerEventSourceAccountsRequest request)
AmazonCloudWatchEventsAn SaaS partner can use this operation to display the AWS account ID that a particular partner event source name is associated with. This operation is not used by AWS customers.
listPartnerEventSourceAccounts in interface AmazonCloudWatchEventspublic ListPartnerEventSourcesResult listPartnerEventSources(ListPartnerEventSourcesRequest request)
AmazonCloudWatchEventsAn SaaS partner can use this operation to list all the partner event source names that they have created. This operation is not used by AWS customers.
listPartnerEventSources in interface AmazonCloudWatchEventspublic ListRuleNamesByTargetResult listRuleNamesByTarget(ListRuleNamesByTargetRequest request)
AmazonCloudWatchEventsLists the rules for the specified target. You can see which of the rules in Amazon EventBridge can invoke a specific target in your account.
listRuleNamesByTarget in interface AmazonCloudWatchEventspublic ListRulesResult listRules(ListRulesRequest request)
AmazonCloudWatchEventsLists your Amazon EventBridge rules. You can either list all the rules or you can provide a prefix to match to the rule names.
ListRules does not list the targets of a rule. To see the targets associated with a rule, use ListTargetsByRule.
listRules in interface AmazonCloudWatchEventspublic ListTagsForResourceResult listTagsForResource(ListTagsForResourceRequest request)
AmazonCloudWatchEventsDisplays the tags associated with an EventBridge resource. In EventBridge, rules and event buses can be tagged.
listTagsForResource in interface AmazonCloudWatchEventspublic ListTargetsByRuleResult listTargetsByRule(ListTargetsByRuleRequest request)
AmazonCloudWatchEventsLists the targets assigned to the specified rule.
listTargetsByRule in interface AmazonCloudWatchEventspublic PutEventsResult putEvents(PutEventsRequest request)
AmazonCloudWatchEventsSends custom events to Amazon EventBridge so that they can be matched to rules.
putEvents in interface AmazonCloudWatchEventspublic PutPartnerEventsResult putPartnerEvents(PutPartnerEventsRequest request)
AmazonCloudWatchEventsThis is used by SaaS partners to write events to a customer's partner event bus. AWS customers do not use this operation.
putPartnerEvents in interface AmazonCloudWatchEventspublic PutPermissionResult putPermission(PutPermissionRequest request)
AmazonCloudWatchEvents
Running PutPermission permits the specified AWS account or AWS organization to put events to the
specified event bus. Amazon EventBridge (CloudWatch Events) rules in your account are triggered by these
events arriving to an event bus in your account.
For another account to send events to your account, that external account must have an EventBridge rule with your account's event bus as a target.
To enable multiple AWS accounts to put events to your event bus, run PutPermission once for each of
these accounts. Or, if all the accounts are members of the same AWS organization, you can run
PutPermission once specifying Principal as "*" and specifying the AWS organization ID
in Condition, to grant permissions to all accounts in that organization.
If you grant permissions using an organization, then accounts in that organization must specify a
RoleArn with proper permissions when they use PutTarget to add your account's event bus
as a target. For more information, see Sending and Receiving Events Between AWS Accounts in the Amazon EventBridge User Guide.
The permission policy on the default event bus cannot exceed 10 KB in size.
putPermission in interface AmazonCloudWatchEventspublic PutRuleResult putRule(PutRuleRequest request)
AmazonCloudWatchEventsCreates or updates the specified rule. Rules are enabled by default, or based on value of the state. You can disable a rule using DisableRule.
A single rule watches for events from a single event bus. Events generated by AWS services go to your account's default event bus. Events generated by SaaS partner services or applications go to the matching partner event bus. If you have custom applications or services, you can specify whether their events go to your default event bus or a custom event bus that you have created. For more information, see CreateEventBus.
If you are updating an existing rule, the rule is replaced with what you specify in this PutRule
command. If you omit arguments in PutRule, the old values for those arguments are not kept. Instead,
they are replaced with null values.
When you create or update a rule, incoming events might not immediately start matching to new or updated rules. Allow a short period of time for changes to take effect.
A rule must contain at least an EventPattern or ScheduleExpression. Rules with EventPatterns are triggered when a matching event is observed. Rules with ScheduleExpressions self-trigger based on the given schedule. A rule can have both an EventPattern and a ScheduleExpression, in which case the rule triggers on matching events as well as on a schedule.
When you initially create a rule, you can optionally assign one or more tags to the rule. Tags can help you
organize and categorize your resources. You can also use them to scope user permissions, by granting a user
permission to access or change only rules with certain tag values. To use the PutRule operation and
assign tags, you must have both the events:PutRule and events:TagResource permissions.
If you are updating an existing rule, any tags you specify in the PutRule operation are ignored. To
update the tags of an existing rule, use TagResource and UntagResource.
Most services in AWS treat : or / as the same character in Amazon Resource Names (ARNs). However, EventBridge uses an exact match in event patterns and rules. Be sure to use the correct ARN characters when creating event patterns so that they match the ARN syntax in the event you want to match.
In EventBridge, it is possible to create rules that lead to infinite loops, where a rule is fired repeatedly. For example, a rule might detect that ACLs have changed on an S3 bucket, and trigger software to change them to the desired state. If the rule is not written carefully, the subsequent change to the ACLs fires the rule again, creating an infinite loop.
To prevent this, write the rules so that the triggered actions do not re-fire the same rule. For example, your rule could fire only if ACLs are found to be in a bad state, instead of after any change.
An infinite loop can quickly cause higher than expected charges. We recommend that you use budgeting, which alerts you when charges exceed your specified limit. For more information, see Managing Your Costs with Budgets.
putRule in interface AmazonCloudWatchEventspublic PutTargetsResult putTargets(PutTargetsRequest request)
AmazonCloudWatchEventsAdds the specified targets to the specified rule, or updates the targets if they are already associated with the rule.
Targets are the resources that are invoked when a rule is triggered.
You can configure the following as targets for Events:
EC2 instances
SSM Run Command
SSM Automation
AWS Lambda functions
Data streams in Amazon Kinesis Data Streams
Data delivery streams in Amazon Kinesis Data Firehose
Amazon ECS tasks
AWS Step Functions state machines
AWS Batch jobs
AWS CodeBuild projects
Pipelines in AWS CodePipeline
Amazon Inspector assessment templates
Amazon SNS topics
Amazon SQS queues, including FIFO queues
The default event bus of another AWS account
Amazon API Gateway REST APIs
Creating rules with built-in targets is supported only in the AWS Management Console. The built-in targets are
EC2 CreateSnapshot API call, EC2 RebootInstances API call,
EC2 StopInstances API call, and EC2 TerminateInstances API call.
For some target types, PutTargets provides target-specific parameters. If the target is a Kinesis
data stream, you can optionally specify which shard the event goes to by using the KinesisParameters
argument. To invoke a command on multiple EC2 instances with one rule, you can use the
RunCommandParameters field.
To be able to make API calls against the resources that you own, Amazon EventBridge (CloudWatch Events) needs the
appropriate permissions. For AWS Lambda and Amazon SNS resources, EventBridge relies on resource-based policies.
For EC2 instances, Kinesis data streams, AWS Step Functions state machines and API Gateway REST APIs, EventBridge
relies on IAM roles that you specify in the RoleARN argument in PutTargets. For more
information, see Authentication and Access Control in the Amazon EventBridge User Guide.
If another AWS account is in the same region and has granted you permission (using PutPermission),
you can send events to that account. Set that account's event bus as a target of the rules in your account. To
send the matched events to the other account, specify that account's event bus as the Arn value when
you run PutTargets. If your account sends events to another account, your account is charged for
each sent event. Each event sent to another account is charged as a custom event. The account receiving the event
is not charged. For more information, see Amazon
EventBridge (CloudWatch Events) Pricing.
Input, InputPath, and InputTransformer are not available with
PutTarget if the target is an event bus of a different AWS account.
If you are setting the event bus of another account as the target, and that account granted permission to your
account through an organization instead of directly by the account ID, then you must specify a
RoleArn with proper permissions in the Target structure. For more information, see
Sending and Receiving Events Between AWS Accounts in the Amazon EventBridge User Guide.
For more information about enabling cross-account events, see PutPermission.
Input, InputPath, and InputTransformer are mutually exclusive and optional parameters of a target. When a rule is triggered due to a matched event:
If none of the following arguments are specified for a target, then the entire event is passed to the target in JSON format (unless the target is Amazon EC2 Run Command or Amazon ECS task, in which case nothing from the event is passed to the target).
If Input is specified in the form of valid JSON, then the matched event is overridden with this constant.
If InputPath is specified in the form of JSONPath (for example, $.detail), then only the part
of the event specified in the path is passed to the target (for example, only the detail part of the event is
passed).
If InputTransformer is specified, then one or more specified JSONPaths are extracted from the event and used as values in a template that you specify as the input to the target.
When you specify InputPath or InputTransformer, you must use JSON dot notation, not
bracket notation.
When you add targets to a rule and the associated rule triggers soon after, new or updated targets might not be immediately invoked. Allow a short period of time for changes to take effect.
This action can partially fail if too many requests are made at the same time. If that happens,
FailedEntryCount is non-zero in the response and each entry in FailedEntries provides
the ID of the failed target and the error code.
putTargets in interface AmazonCloudWatchEventspublic RemovePermissionResult removePermission(RemovePermissionRequest request)
AmazonCloudWatchEvents
Revokes the permission of another AWS account to be able to put events to the specified event bus. Specify the
account to revoke by the StatementId value that you associated with the account when you granted it
permission with PutPermission. You can find the StatementId by using
DescribeEventBus.
removePermission in interface AmazonCloudWatchEventspublic RemoveTargetsResult removeTargets(RemoveTargetsRequest request)
AmazonCloudWatchEventsRemoves the specified targets from the specified rule. When the rule is triggered, those targets are no longer be invoked.
When you remove a target, when the associated rule triggers, removed targets might continue to be invoked. Allow a short period of time for changes to take effect.
This action can partially fail if too many requests are made at the same time. If that happens,
FailedEntryCount is non-zero in the response and each entry in FailedEntries provides
the ID of the failed target and the error code.
removeTargets in interface AmazonCloudWatchEventspublic TagResourceResult tagResource(TagResourceRequest request)
AmazonCloudWatchEventsAssigns one or more tags (key-value pairs) to the specified EventBridge resource. Tags can help you organize and categorize your resources. You can also use them to scope user permissions by granting a user permission to access or change only resources with certain tag values. In EventBridge, rules and event buses can be tagged.
Tags don't have any semantic meaning to AWS and are interpreted strictly as strings of characters.
You can use the TagResource action with a resource that already has tags. If you specify a new tag
key, this tag is appended to the list of tags associated with the resource. If you specify a tag key that is
already associated with the resource, the new tag value that you specify replaces the previous value for that
tag.
You can associate as many as 50 tags with a resource.
tagResource in interface AmazonCloudWatchEventspublic TestEventPatternResult testEventPattern(TestEventPatternRequest request)
AmazonCloudWatchEventsTests whether the specified event pattern matches the provided event.
Most services in AWS treat : or / as the same character in Amazon Resource Names (ARNs). However, EventBridge uses an exact match in event patterns and rules. Be sure to use the correct ARN characters when creating event patterns so that they match the ARN syntax in the event you want to match.
testEventPattern in interface AmazonCloudWatchEventspublic UntagResourceResult untagResource(UntagResourceRequest request)
AmazonCloudWatchEventsRemoves one or more tags from the specified EventBridge resource. In Amazon EventBridge (CloudWatch Events, rules and event buses can be tagged.
untagResource in interface AmazonCloudWatchEventspublic void shutdown()
AmazonCloudWatchEventsshutdown in interface AmazonCloudWatchEventspublic ResponseMetadata getCachedResponseMetadata(AmazonWebServiceRequest request)
AmazonCloudWatchEventsResponse metadata is only cached for a limited period of time, so if you need to access this extra diagnostic information for an executed request, you should use this method to retrieve it as soon as possible after executing a request.
getCachedResponseMetadata in interface AmazonCloudWatchEventsrequest - The originally executed request.Copyright © 2020. All rights reserved.