public class FastMultiByteArrayInputStream extends MeasurableInputStream implements RepositionableStream
FastByteArrayInputStream,
but it can hold 256 PiB of data. The relevant constructor is FastMultiByteArrayInputStream(InputStream, long),
which fetches a stream and loads it into a sequence of byte arrays.| Modifier and Type | Field and Description |
|---|---|
byte[][] |
array
The array of arrays backing the input stream, plus an additional
null entry. |
byte[] |
current
The current array.
|
long |
length
The number of valid bytes in
array. |
static int |
SLICE_BITS
The number of bits of an array slice index.
|
static int |
SLICE_MASK
The mask to retrieve a slice offset.
|
static int |
SLICE_SIZE
The maximum length of an array slice.
|
| Constructor and Description |
|---|
FastMultiByteArrayInputStream(byte[] array)
Creates a new multi-array input stream using a given array.
|
FastMultiByteArrayInputStream(FastMultiByteArrayInputStream is)
Creates a new multi-array input stream sharing the backing arrays of another multi-array input stream.
|
FastMultiByteArrayInputStream(InputStream is,
long size)
Creates a new multi-array input stream loading it from an input stream.
|
FastMultiByteArrayInputStream(MeasurableInputStream is)
Creates a new multi-array input stream loading it from a measurable input stream.
|
| Modifier and Type | Method and Description |
|---|---|
int |
available()
Returns the number of bytes that can be read (or skipped over) from this input stream without blocking.
|
void |
close()
NOP.
|
long |
length()
Returns the overall length of this stream (optional operation).
|
void |
mark(int dummy)
Marks the current position in this input stream.
|
boolean |
markSupported()
Tests if this input stream supports the
mark and
reset methods. |
long |
position()
Returns the current stream position.
|
void |
position(long newPosition)
Sets the current stream position.
|
int |
read()
Reads the next byte of data from the input stream.
|
int |
read(byte[] b,
int offset,
int length)
Reads up to
len bytes of data from the input stream into
an array of bytes. |
void |
reset()
Repositions this stream to the position at the time the
mark method was last called on this input stream. |
long |
skip(long n)
Skips over and discards
n bytes of data from this input
stream. |
readpublic static final int SLICE_BITS
public static final int SLICE_SIZE
public static final int SLICE_MASK
public byte[][] array
null entry.public byte[] current
public long length
array.public FastMultiByteArrayInputStream(MeasurableInputStream is) throws IOException
is - the input stream that will fill the array.IOExceptionpublic FastMultiByteArrayInputStream(InputStream is, long size) throws IOException
is - the input stream that will fill the array.size - the number of bytes to be read from is.IOExceptionpublic FastMultiByteArrayInputStream(FastMultiByteArrayInputStream is)
is - the multi-array input stream to replicate.public FastMultiByteArrayInputStream(byte[] array)
array - the backing array.public int available()
Note that this number may be smaller than the number of bytes actually
available from the stream if this number exceeds Integer.MAX_VALUE.
available in class InputStreamInteger.MAX_VALUE.public long skip(long n)
java.io.InputStreamn bytes of data from this input
stream. The skip method may, for a variety of reasons, end
up skipping over some smaller number of bytes, possibly 0.
This may result from any of a number of conditions; reaching end of file
before n bytes have been skipped is only one possibility.
The actual number of bytes skipped is returned. If n is
negative, the skip method for class InputStream always
returns 0, and no bytes are skipped. Subclasses may handle the negative
value differently.
The skip method of this class creates a
byte array and then repeatedly reads into it until n bytes
have been read or the end of the stream has been reached. Subclasses are
encouraged to provide a more efficient implementation of this method.
For instance, the implementation may depend on the ability to seek.
skip in class InputStreamn - the number of bytes to be skipped.public int read()
java.io.InputStreamint in the range 0 to
255. If no byte is available because the end of the stream
has been reached, the value -1 is returned. This method
blocks until input data is available, the end of the stream is detected,
or an exception is thrown.
A subclass must provide an implementation of this method.
read in class InputStream-1 if the end of the
stream is reached.public int read(byte[] b,
int offset,
int length)
java.io.InputStreamlen bytes of data from the input stream into
an array of bytes. An attempt is made to read as many as
len bytes, but a smaller number may be read.
The number of bytes actually read is returned as an integer.
This method blocks until input data is available, end of file is detected, or an exception is thrown.
If len is zero, then no bytes are read and
0 is returned; otherwise, there is an attempt to read at
least one byte. If no byte is available because the stream is at end of
file, the value -1 is returned; otherwise, at least one
byte is read and stored into b.
The first byte read is stored into element b[off], the
next one into b[off+1], and so on. The number of bytes read
is, at most, equal to len. Let k be the number of
bytes actually read; these bytes will be stored in elements
b[off] through b[off+k-1],
leaving elements b[off+k] through
b[off+len-1] unaffected.
In every case, elements b[0] through
b[off] and elements b[off+len] through
b[b.length-1] are unaffected.
The read(b, off, len) method
for class InputStream simply calls the method
read() repeatedly. If the first such call results in an
IOException, that exception is returned from the call to
the read(b, off, len) method. If
any subsequent call to read() results in a
IOException, the exception is caught and treated as if it
were end of file; the bytes read up to that point are stored into
b and the number of bytes read before the exception
occurred is returned. The default implementation of this method blocks
until the requested amount of input data len has been read,
end of file is detected, or an exception is thrown. Subclasses are encouraged
to provide a more efficient implementation of this method.
read in class InputStreamb - the buffer into which the data is read.offset - the start offset in array b
at which the data is written.length - the maximum number of bytes to read.-1 if there is no more data because the end of
the stream has been reached.InputStream.read()public long position()
RepositionableStreamposition in interface MeasurableStreamposition in interface RepositionableStreampublic void position(long newPosition)
RepositionableStreamposition in interface RepositionableStreamnewPosition - the new stream position.public long length()
throws IOException
MeasurableStreamlength in interface MeasurableStreamIOExceptionpublic void close()
close in interface Closeableclose in interface AutoCloseableclose in class InputStreampublic boolean markSupported()
java.io.InputStreammark and
reset methods. Whether or not mark and
reset are supported is an invariant property of a
particular input stream instance. The markSupported method
of InputStream returns false.markSupported in class InputStreamtrue if this stream instance supports the mark
and reset methods; false otherwise.InputStream.mark(int),
InputStream.reset()public void mark(int dummy)
java.io.InputStreamreset method repositions this stream at the last marked
position so that subsequent reads re-read the same bytes.
The readlimit arguments tells this input stream to
allow that many bytes to be read before the mark position gets
invalidated.
The general contract of mark is that, if the method
markSupported returns true, the stream somehow
remembers all the bytes read after the call to mark and
stands ready to supply those same bytes again if and whenever the method
reset is called. However, the stream is not required to
remember any data at all if more than readlimit bytes are
read from the stream before reset is called.
Marking a closed stream should not have any effect on the stream.
The mark method of InputStream does
nothing.
mark in class InputStreamdummy - the maximum limit of bytes that can be read before
the mark position becomes invalid.InputStream.reset()public void reset()
java.io.InputStreammark method was last called on this input stream.
The general contract of reset is:
markSupported returns
true, then:
mark has not been called since
the stream was created, or the number of bytes read from the stream
since mark was last called is larger than the argument
to mark at that last call, then an
IOException might be thrown.
IOException is not thrown, then the
stream is reset to a state such that all the bytes read since the
most recent call to mark (or since the start of the
file, if mark has not been called) will be resupplied
to subsequent callers of the read method, followed by
any bytes that otherwise would have been the next input data as of
the time of the call to reset. markSupported returns
false, then:
reset may throw an
IOException.
IOException is not thrown, then the stream
is reset to a fixed state that depends on the particular type of the
input stream and how it was created. The bytes that will be supplied
to subsequent callers of the read method depend on the
particular type of the input stream. The method reset for class InputStream
does nothing except throw an IOException.
reset in class InputStreamInputStream.mark(int),
IOException