com.datalogic.decode.configuration

Class Code39

java.lang.Object

com.datalogic.device.configuration.PropertyGroup

com.datalogic.decode.configuration.Code39

public class Code39
extends PropertyGroup

Code39 is the class that configures the Code39, Code32 and TriOptic Symbologies.

Field Summary

Fields

Modifier and Type	Field and Description
BooleanProperty	code32 code32 enables or disables the Code 32 symbology conversion.
CharacterProperty	code32_userID code32_userID specifies the Code 32 symbology identifier (if any). The symbology identifier is sent with the label when the global decode property Formatting.sendCodeId is set to SendCodeID.USERDEFINED_IDENTIFIER_BEFORE_LABEL or SendCodeID.USERDEFINED_IDENTIFIER_AFTER_LABEL.
BooleanProperty	enable enable enables or disables the symbology.
BooleanProperty	enableChecksum enableChecksum requires the use of checksum characters to verify a barcode.
BooleanProperty	fullAscii fullAscii enables or disables the Full Ascii conversion.
NumericProperty	Length1 Length1 is one of the two configurable label lengths.
NumericProperty	Length2 Length2 is one of the two configurable label lengths.
EnumProperty<LengthControlMode>	lengthMode lengthMode is the LengthControlMode selected for a label.
BooleanProperty	sendChecksum sendChecksum includes the checksum in the label transmission (if checksum is required with enableChecksum).
BooleanProperty	trioptic trioptic enables or disables the Trioptic Code 39 symbology.
CharacterProperty	trioptic_userID trioptic_userID specifies the Trioptic Code 39 symbology identifier (if any). The symbology identifier is sent with the label when the global decode property Formatting.sendCodeId is set to SendCodeID.USERDEFINED_IDENTIFIER_BEFORE_LABEL or SendCodeID.USERDEFINED_IDENTIFIER_AFTER_LABEL.
CharacterProperty	userID userID specifies the symbology identifier (if any). The symbology identifier is sent with the label when the global decode property Formatting.sendCodeId is set to SendCodeID.USERDEFINED_IDENTIFIER_BEFORE_LABEL or SendCodeID.USERDEFINED_IDENTIFIER_AFTER_LABEL.

Constructor Summary

Constructors

Constructor and Description
Code39(PropertyGetter editor) This is the constructor of Code39.

Method Summary

Methods inherited from class com.datalogic.device.configuration.PropertyGroup

getGroups, getId, getName, getProperties, getPropertyById, getPropertyByName, getPropertyGroupById, getPropertyGroupByName, isFullySupported, isSupported, load, setToDefault, store

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Field Detail

enableChecksum

public BooleanProperty enableChecksum

enableChecksum requires the use of checksum characters to verify a barcode.

sendChecksum

public BooleanProperty sendChecksum

sendChecksum includes the checksum in the label transmission (if checksum is required with enableChecksum).

fullAscii

public BooleanProperty fullAscii

fullAscii enables or disables the Full Ascii conversion.

code32

public BooleanProperty code32

code32 enables or disables the Code 32 symbology conversion.

code32_userID

public CharacterProperty code32_userID

code32_userID specifies the Code 32 symbology identifier (if any).
The symbology identifier is sent with the label when the global decode property Formatting.sendCodeId is set to SendCodeID.USERDEFINED_IDENTIFIER_BEFORE_LABEL or SendCodeID.USERDEFINED_IDENTIFIER_AFTER_LABEL.

trioptic

public BooleanProperty trioptic

trioptic enables or disables the Trioptic Code 39 symbology.

trioptic_userID

public CharacterProperty trioptic_userID

trioptic_userID specifies the Trioptic Code 39 symbology identifier (if any).
The symbology identifier is sent with the label when the global decode property Formatting.sendCodeId is set to SendCodeID.USERDEFINED_IDENTIFIER_BEFORE_LABEL or SendCodeID.USERDEFINED_IDENTIFIER_AFTER_LABEL.

Length1

public NumericProperty Length1

Length1 is one of the two configurable label lengths. It can be used as a single fixed accepted length, when lengthMode is set to LengthControlMode.ONE_FIXED. When LengthControlMode.TWO_FIXED is enabled, its value is one of the two possible accepted fixed lengths for a specific label. It can also represent the minor or major length value whenever LengthControlMode.RANGE is selected. If is set below the accepted minimum, the smallest accepted length will be used; instead it the set value exceed the maximum value, the biggest accepted length will be used.

Note: Length1 allowed range of values is somehow related to the nature of the barcode (linear vs 2D) but it's not intended to document in any way the scanner capabilities. An accepted minimum value and an accepted maximum value are introduced only to simplify length management in the device Scanner settings app. The chance to read a barcode depends on it's printed quality, resolution, overall size, distance from the reader, environmental light, etc...

See Also:

LengthControlMode

Length2

public NumericProperty Length2

Length2 is one of the two configurable label lengths. When LengthControlMode.TWO_FIXED is enabled, its value is one of the two possible accepted fixed lengths for a specific label. It can also represent the minor or major length value whenever LengthControlMode.RANGE is selected. If is set below the accepted minimum, the smallest accepted length will be used; instead it the set value exceed the maximum value, the biggest accepted length will be used.

Note: Length2 allowed range of values is somehow related to the nature of the barcode (linear vs 2D) but it's not intended to document in any way the scanner capabilities. An accepted minimum value and an accepted maximum value are introduced only to simplify length management in the device Scanner settings app. The chance to read a barcode depends on it's printed quality, resolution, overall size, distance from the reader, environmental light, etc...

See Also:

LengthControlMode

lengthMode

public EnumProperty<LengthControlMode> lengthMode

lengthMode is the LengthControlMode selected for a label. Selects the length control mode.

See Also:

LengthControlMode

enable

public BooleanProperty enable

enable enables or disables the symbology.

userID

public CharacterProperty userID

userID specifies the symbology identifier (if any).
The symbology identifier is sent with the label when the global decode property Formatting.sendCodeId is set to SendCodeID.USERDEFINED_IDENTIFIER_BEFORE_LABEL or SendCodeID.USERDEFINED_IDENTIFIER_AFTER_LABEL.

Constructor Detail

Code39

public Code39(PropertyGetter editor)

This is the constructor of Code39. All symbology options are initialized by editor.

Parameters:

editor - A PropertyGetter used to load the current barcode family.