com.datalogic.decode.configuration

Class Code128

java.lang.Object

com.datalogic.device.configuration.PropertyGroup

com.datalogic.decode.configuration.Code128

public class Code128
extends PropertyGroup

Code128 is the class that configures the Code 128, GS1-128 and ISBT 128 Symbologies.

Field Summary

Fields

Modifier and Type	Field and Description
EnumProperty<Code128Aggressiveness>	aggressiveness aggressiveness control the aggressiveness for the Code 128 symbology.
BooleanProperty	commonlyConcatenatedPairs commonlyConcatenatedPairs allow the concatenation of common concatenated pairs.
BooleanProperty	enable enable enables or disables the symbology.
BooleanProperty	gs1_128 gs1_128 enables or disables the GS1-128 symbology.
CharacterProperty	gs1_128_userID gs1_128_userID specifies the GS1-128 symbology identifier (if any). The symbology identifier is sent with the label when the global decode property Formatting.sendCodeId is set to SendCodeID.USERDEFINED_IDENTIFIER_BEFORE_LABEL or SendCodeID.USERDEFINED_IDENTIFIER_AFTER_LABEL.
BooleanProperty	isbt_128 isbt_128 enables or disables the ISBT 128 symbology.
CharacterProperty	isbt_128_userID isbt_128_userID specifies the ISBT-128 symbology identifier (if any). The symbology identifier is sent with the label when the global decode property Formatting.sendCodeId is set to SendCodeID.USERDEFINED_IDENTIFIER_BEFORE_LABEL or SendCodeID.USERDEFINED_IDENTIFIER_AFTER_LABEL.
EnumProperty<Isbt128Mode>	Isbt128EnablingMode Isbt128EnablingMode set the allowed ISBT 128 barcode symbologies.
NumericProperty	Length1 Length1 is one of the two configurable label lengths.
NumericProperty	Length2 Length2 is one of the two configurable label lengths.
EnumProperty<LengthControlMode>	lengthMode lengthMode is the LengthControlMode selected for a label.
CharacterProperty	userID userID specifies the symbology identifier (if any). The symbology identifier is sent with the label when the global decode property Formatting.sendCodeId is set to SendCodeID.USERDEFINED_IDENTIFIER_BEFORE_LABEL or SendCodeID.USERDEFINED_IDENTIFIER_AFTER_LABEL.

Constructor Summary

Constructors

Constructor and Description
Code128(PropertyGetter editor) This is the constructor of Code 128.

Method Summary

Methods inherited from class com.datalogic.device.configuration.PropertyGroup

getGroups, getId, getName, getProperties, getPropertyById, getPropertyByName, getPropertyGroupById, getPropertyGroupByName, isFullySupported, isSupported, load, setToDefault, store

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Field Detail

gs1_128

public BooleanProperty gs1_128

gs1_128 enables or disables the GS1-128 symbology.

gs1_128_userID

public CharacterProperty gs1_128_userID

gs1_128_userID specifies the GS1-128 symbology identifier (if any).
The symbology identifier is sent with the label when the global decode property Formatting.sendCodeId is set to SendCodeID.USERDEFINED_IDENTIFIER_BEFORE_LABEL or SendCodeID.USERDEFINED_IDENTIFIER_AFTER_LABEL.

isbt_128

public BooleanProperty isbt_128

isbt_128 enables or disables the ISBT 128 symbology.

isbt_128_userID

public CharacterProperty isbt_128_userID

isbt_128_userID specifies the ISBT-128 symbology identifier (if any).
The symbology identifier is sent with the label when the global decode property Formatting.sendCodeId is set to SendCodeID.USERDEFINED_IDENTIFIER_BEFORE_LABEL or SendCodeID.USERDEFINED_IDENTIFIER_AFTER_LABEL.

Isbt128EnablingMode

public EnumProperty<Isbt128Mode> Isbt128EnablingMode

Isbt128EnablingMode set the allowed ISBT 128 barcode symbologies.

commonlyConcatenatedPairs

public BooleanProperty commonlyConcatenatedPairs

commonlyConcatenatedPairs allow the concatenation of common concatenated pairs.

aggressiveness

public EnumProperty<Code128Aggressiveness> aggressiveness

aggressiveness control the aggressiveness for the Code 128 symbology.

Length1

public NumericProperty Length1

Length1 is one of the two configurable label lengths. It can be used as a single fixed accepted length, when lengthMode is set to LengthControlMode.ONE_FIXED. When LengthControlMode.TWO_FIXED is enabled, its value is one of the two possible accepted fixed lengths for a specific label. It can also represent the minor or major length value whenever LengthControlMode.RANGE is selected. If is set below the accepted minimum, the smallest accepted length will be used; instead it the set value exceed the maximum value, the biggest accepted length will be used.

Note: Length1 allowed range of values is somehow related to the nature of the barcode (linear vs 2D) but it's not intended to document in any way the scanner capabilities. An accepted minimum value and an accepted maximum value are introduced only to simplify length management in the device Scanner settings app. The chance to read a barcode depends on it's printed quality, resolution, overall size, distance from the reader, environmental light, etc...

See Also:

LengthControlMode

Length2

public NumericProperty Length2

Length2 is one of the two configurable label lengths. When LengthControlMode.TWO_FIXED is enabled, its value is one of the two possible accepted fixed lengths for a specific label. It can also represent the minor or major length value whenever LengthControlMode.RANGE is selected. If is set below the accepted minimum, the smallest accepted length will be used; instead it the set value exceed the maximum value, the biggest accepted length will be used.

Note: Length2 allowed range of values is somehow related to the nature of the barcode (linear vs 2D) but it's not intended to document in any way the scanner capabilities. An accepted minimum value and an accepted maximum value are introduced only to simplify length management in the device Scanner settings app. The chance to read a barcode depends on it's printed quality, resolution, overall size, distance from the reader, environmental light, etc...

See Also:

LengthControlMode

lengthMode

public EnumProperty<LengthControlMode> lengthMode

lengthMode is the LengthControlMode selected for a label. Selects the length control mode.

See Also:

LengthControlMode

enable

public BooleanProperty enable

enable enables or disables the symbology.

userID

public CharacterProperty userID

userID specifies the symbology identifier (if any).
The symbology identifier is sent with the label when the global decode property Formatting.sendCodeId is set to SendCodeID.USERDEFINED_IDENTIFIER_BEFORE_LABEL or SendCodeID.USERDEFINED_IDENTIFIER_AFTER_LABEL.

Constructor Detail

Code128

public Code128(PropertyGetter editor)

This is the constructor of Code 128. All symbology options are initialized by editor.

Parameters:

editor - A PropertyGetter used to load the current barcode family.