com.datalogic.decode.configuration

Class Codabar

java.lang.Object

com.datalogic.device.configuration.PropertyGroup

com.datalogic.decode.configuration.Codabar

public class Codabar
extends PropertyGroup

Codabar is the class that configures the Codabar Symbology.

Field Summary

Fields

Modifier and Type	Field and Description
BooleanProperty	convertToCLSI convertToCLSI restricts the decoding to only read labels that conform to CLSI specifications.
BooleanProperty	enable enable enables or disables the symbology.
BooleanProperty	enableChecksum enableChecksum requires the use of checksum characters to verify a barcode.
NumericProperty	Length1 Length1 is one of the two configurable label lengths.
NumericProperty	Length2 Length2 is one of the two configurable label lengths.
EnumProperty<LengthControlMode>	lengthMode lengthMode is the LengthControlMode selected for a label.
BooleanProperty	sendChecksum sendChecksum includes the checksum in the label transmission (if checksum is required with enableChecksum).
BooleanProperty	sendStartStop sendStartStop enables/disables the transmission of the decoded star and stop characters.
CharacterProperty	userID userID specifies the symbology identifier (if any). The symbology identifier is sent with the label when the global decode property Formatting.sendCodeId is set to SendCodeID.USERDEFINED_IDENTIFIER_BEFORE_LABEL or SendCodeID.USERDEFINED_IDENTIFIER_AFTER_LABEL.

Constructor Summary

Constructors

Constructor and Description
Codabar(PropertyGetter editor) This is the constructor of Codabar.

Method Summary

Methods inherited from class com.datalogic.device.configuration.PropertyGroup

getGroups, getId, getName, getProperties, getPropertyById, getPropertyByName, getPropertyGroupById, getPropertyGroupByName, isFullySupported, isSupported, load, setToDefault, store

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Field Detail

enableChecksum

public BooleanProperty enableChecksum

enableChecksum requires the use of checksum characters to verify a barcode.

sendChecksum

public BooleanProperty sendChecksum

sendChecksum includes the checksum in the label transmission (if checksum is required with enableChecksum).

sendStartStop

public BooleanProperty sendStartStop

sendStartStop enables/disables the transmission of the decoded star and stop characters. The start and stop characters will both be translated as A, B, C or D.

convertToCLSI

public BooleanProperty convertToCLSI

convertToCLSI restricts the decoding to only read labels that conform to CLSI specifications. Label length must be 14 and the data is split into fields of 1, 4, 5 and 4 characters separated by spaces.

Length1

public NumericProperty Length1

Length1 is one of the two configurable label lengths. It can be used as a single fixed accepted length, when lengthMode is set to LengthControlMode.ONE_FIXED. When LengthControlMode.TWO_FIXED is enabled, its value is one of the two possible accepted fixed lengths for a specific label. It can also represent the minor or major length value whenever LengthControlMode.RANGE is selected. If is set below the accepted minimum, the smallest accepted length will be used; instead it the set value exceed the maximum value, the biggest accepted length will be used.

Note: Length1 allowed range of values is somehow related to the nature of the barcode (linear vs 2D) but it's not intended to document in any way the scanner capabilities. An accepted minimum value and an accepted maximum value are introduced only to simplify length management in the device Scanner settings app. The chance to read a barcode depends on it's printed quality, resolution, overall size, distance from the reader, environmental light, etc...

See Also:

LengthControlMode

Length2

public NumericProperty Length2

Length2 is one of the two configurable label lengths. When LengthControlMode.TWO_FIXED is enabled, its value is one of the two possible accepted fixed lengths for a specific label. It can also represent the minor or major length value whenever LengthControlMode.RANGE is selected. If is set below the accepted minimum, the smallest accepted length will be used; instead it the set value exceed the maximum value, the biggest accepted length will be used.

Note: Length2 allowed range of values is somehow related to the nature of the barcode (linear vs 2D) but it's not intended to document in any way the scanner capabilities. An accepted minimum value and an accepted maximum value are introduced only to simplify length management in the device Scanner settings app. The chance to read a barcode depends on it's printed quality, resolution, overall size, distance from the reader, environmental light, etc...

See Also:

LengthControlMode

lengthMode

public EnumProperty<LengthControlMode> lengthMode

lengthMode is the LengthControlMode selected for a label. Selects the length control mode.

See Also:

LengthControlMode

enable

public BooleanProperty enable

enable enables or disables the symbology.

userID

public CharacterProperty userID

userID specifies the symbology identifier (if any).
The symbology identifier is sent with the label when the global decode property Formatting.sendCodeId is set to SendCodeID.USERDEFINED_IDENTIFIER_BEFORE_LABEL or SendCodeID.USERDEFINED_IDENTIFIER_AFTER_LABEL.

Constructor Detail

Codabar

public Codabar(PropertyGetter editor)

This is the constructor of Codabar. All symbology options are initialized by editor.

Parameters:

editor - A PropertyGetter used to load the current barcode family.